Impex MARCY SM 4000 Manual de usuario

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

Model

SM 4000

Retain This

Manual for

Reference

07-01-03

OWNER'S

MANUAL

MARCY SMITH MACHINE

SM 4000

IMPEX FITNESS PRODUCTS

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: (800) 999-8899 Fax: (626) 961-9966

www.impex-fitness.com

[email protected]

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................... 1

IMPORTANT SAFETY NOTICES..................................................................... 2

SMITH MACHINE HARDWARE PACK….......…............................................. 3

SMITH MACHINE ASSEMBLY INSTRUCTIONS............................................. 5

EXPLODED DIAGRAM…………………………………………………………….. 17

SMITH MACHINE PARTS LIST………..………………………………………….. 18

MULTI-PURPOSE BENCH HARDWARE PACK………………………………… 19

MULTI-PURPOSE BENCH ASSEMBLY INSTRUCTIONS............................... 20

EXPLODED DIAGRAM……………………………………………………………... 25

MULTI-PURPOSE BENCH PARTS LIST…………………………………………. 26

WARRANTY.................................................................................................…. 27

ORDERING PARTS.......................................................................................… 27

BEFORE YOU BEGIN

Thank you for selecting the MARCY SM4000 by IMPEX FITNESS

PRODUCTS. For your safety and benefit, read this manual carefully

before using the machine. As a manufacturer, we are committed to

provide you complete customer satisfaction. If you have any questions,

or find there are missing or damaged parts, we guarantee you complete

satisfaction through direct assistance from our factory. To avoid

unnecessary delays, please call our TOLL-FREE customer service

number. Our Customer Service Agents will provide immediate assistance

to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]m

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire

manual before you assemble or operate your machine. In particular, note the following

safety precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN

IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE

AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL

INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.

ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY

DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

SMITH MACHINE HARDEWARE PACK

SMITH MACHINE ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches

NOTE: It is strongly recommended two or more people assembling this machine to

avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the two Base Frames (#1) by a Cross Brace (#2) in the mid-span. Secure

each end of The Cross Brace with two M10 x 3 ½” Carriage Bolts (#79), one 4 ¾”

x 2” Bracket (#36), two Ø ¾” Washers (#66), and two M10 Aircraft Nuts (#86).

B.) NOTE: DO NOT tighten the Nuts and Bolts yet. DIAGRAM 1

STEP 2 (See Diagram 2)

A.) Attach the right Front Vertical Frame (#3) to the right Base Frame (#1). Secure it

with two M10 x 3” Carriage Bolts (#76), one 5 1/8” x 2 ¾” Bracket (#34), two Ø ¾”

Washers (#66), and two M10 Aircraft Nuts (#86). Do not tighten the Nuts and Bolts

yet.

B.) Align a Ø 2 ½” Rubber Bumper (#59) to the hole on the Base Frame. Insert a

Guide Rod (#25) through the Rubber Bumper and into the Base Frame. Secure it

with one M10 x 1” Allen Bolt (#68) and Ø ¾” Washer (#66).

C.)Slide a Safety Stop Frame (#26) onto the Guide Rod (#25).

D.)Attach the hole on top of the Right Vertical Frame (#5) to the top of the Guide Rod

(#25). Attach the top of Right Vertical Frame (#5) to the top of Front Vertical Frame

(#3). Attach the bottom of Right Vertical Frame (#5) to the Base Frame (#1).

E.) Secure the Guide Rod (#25) to the Right Vertical Frame (#5) with one M10 x 1”

Allen Bolt (#68) and Ø ¾” Washer (#66). Secure the Right Vertical Frame (#5) to

the Base Frame with two M10 x 3” Carriage Bolts (#76), one 6 ¼” x 2” Bracket

(#37), two Ø ¾” Washers (#66), and two M10 Aircraft Nuts (#86). Do not tighten

the Nuts and Bolts yet.

F.) Secure the Right Vertical Frame (#5) to the Front Vertical Beam (#3) with one

Triangle Bracket (#33), M10 x 3 1/8” Allen Bolt (#72), and ∅3/4” Washer (#66) to

the top hole. Secure the bottom two holes with two M10 x 3 3/8” Carriage Bolts

(#78), ∅3/4” Washers (#66) and M10 Aircraft Nuts (#86).

G.)Repeat the above Procedures A, B, C, D, E and F to install the other side.

H.)Attach the Front Top Beam (#15) to the Front Vertical Beams (#3) and the Triangle

Brackets (#33). Align the Holes. Secure each end with two M10 x 3 3/8” Carriage

Bolts (#78), Ø3/4” Washers (#66), and M10 Aircraft Nuts (#86).

I.) Securely tighten all Nuts and Bolts previously installed.

DIAGRAM2

STEP 3 (See Diagram 3)

A.) Attach the Rear Vertical Beam (#6) to the top of the Cross Brace (#2). Attach the

Weight Glide Base (#8) to the Cross Brace from the Bottom. Align the holes. Secure

them with two M10 x 3” Carriage Bolts (#76), Ø ¾” Washers (#66), and M10 Aircraft

Nuts (#86).

B.) Attach the Backrest Board (#38) to the Rear Vertical Beam. Secure it with two M8 x 2

½” Allen Bolts (#80) and Ø 5/8” Washers (#65). DIAGRAM 3

STEP 4 (See Diagram 4)

A.) Attach the Weight Glide Post (#7) to the Weight Glide Base (#8). Secure it with four M10 x

1” Carriage Bolts (#74), Ø ¾” Washers (#66) and M10 Aircraft Nuts (#86).

B.) Slide the Sliding Weight Post (#14) onto the Post from the top. Place the Upper Frame

(#9) onto the Weight Glide Post (#7), Rear Vertical Beam (#6) and Front Top Beam (#15).

C.)Align the holes. Secure the Upper Frame (#9) to the Weight Glide Post (#7) with two M10

x 3” Allen Bolts (#71), four Ø ¾” Washers (#66), and two M10 Aircraft Nuts (#86). Do not

tighten the Nuts and Bolts yet.

D.)Secure the Upper Frame to the Rear Vertical Beam with two M10 x 2 ¾” Carriage Bolts

(#75), ∅¾” Washers (#66) and M10 Aircraft Nuts (#86).

E.) Secure the Upper Frame to the Front Top Beam with two M10 x 3 1/8” Carriage Bolts

(#77), one 5 1/8” x 2 3/8” Bracket (#35), two Ø ¾” Washers (#66), and two M10 Aircraft

Nuts (#86). Securely tighten all Nuts and Bolts previously installed.

DIAGRAM 4

Tabla de contenidos

Otros manuales de Gimnasio en casa de Impex

Impex

Impex APEX Manual de usuario

Impex

Impex MARCY MD-377 Manual de usuario

Impex

Impex MARCY DIAMOND ELITE MD-857 Manual de usuario

Impex

Impex MARCY PRO MWM-4484 Manual de usuario

Impex

Impex MARCY MWM-980 Manual de usuario

Impex

Impex IRON GRIP STRENGTH TSA-5761 Manual de usuario

Impex

Impex PLATINUM MARCY PM-3000 Manual de usuario

Impex

Impex APEX TC-3502 Manual de usuario

Impex

Impex MARCY MWB 716 Manual de usuario

Impex

Impex MARCY MWM-1840 Manual de usuario

Impex

Impex Circuit Fitness AMZ-600CG Manual de usuario

Impex

Impex Circuit Fitness AMZ-167RW Manual de usuario

Impex

Impex MARCY PRO PM-2084 Instrucciones de instalación y funcionamiento

Impex

Impex Iron Grip Sport IGS-05 Manual de usuario

Impex

Impex APEX II Manual de usuario

Impex

Impex MARCY DIAMOND ELITE MD-2080 Manual de usuario

Impex

Impex ADI-5100-I Manual de usuario

Impex

Impex COMPETITOR WM-1505 Manual de usuario

Impex

Impex APEX WM-348.1 Manual de usuario

Impex

Impex POWERHOUSE PHC-700 Manual de usuario

Impex

Impex MARCY DIAMOND MD-844 Manual de usuario

Impex

Impex NS-908UP Manual de usuario

Impex

Impex MARCY MULTI PURPOSE BENCH MWB-682 Manual de usuario

Impex

Impex IRON GRIP STRENGTH TSA-5682 Manual de usuario

Manuales populares de Gimnasio en casa de otras marcas

Horizon Fitness

Horizon Fitness OXFORD 6 Manual de usuario

Energetics

Energetics Multi Trainer 5.1 Manual de usuario

Matrix

Matrix MG-PL Series Manual de usuario

Reebok

Reebok Tbr2i Manual de operación y mantenimiento

Weider

Weider 8300 Hard Drive Manual de usuario

Pure Fitness

Pure Fitness 8526HE Manual de usuario

Weider

Weider 8700 I Guía de inicio rápido

Bowflex

Bowflex Sport 001-6961 Manual de usuario

NordicTrack

NordicTrack E8200 Competition Bench Guía de inicio rápido

Weider

Weider WEMC10161 Manual de usuario

Body Solid

Body Solid GHYP-345 Manual de usuario

Evo

Evo TAHOE 5105 Manual de usuario

cardiobull

cardiobull RA17 Manual de usuario

ParaBody

ParaBody 40 Manual de usuario

JLL

JLL Ventus Pro Air Power Manual de usuario

Trojan

Trojan Colorado 370 Manual de usuario

Octane Fitness

Octane Fitness xRide xR650 Manual de usuario

Precor

Precor Discovery Series Manual de usuario