Impex IRON GRIP STRENGTH TSA-5682 Manual de usuario

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

Model

TSA-5682

Retain This

Manual for

Reference

06-15-05

OWNER'S

MANUAL

IRON GRIP STRENGTH

Standard Bench

TSA-5682

IMPEX INC.

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: (800) 999-8899 Fax: (626) 961-9966

www.impex-fitness.com

[email protected]

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................... 1

IMPORTANT SAFETY NOTICE....................................................................... 2

HARDWARE IDENTIFIER.....…....................................................................... 4

ASSEMBLY INSTRUCTIONS........................................................................... 6

EXPLODED DIAGRAM.........................................................................……... 11

PARTS LIST…………………………………………………………………………. 12

WARRANTY.................................................................................................… 13

ORDERING PARTS......................................................................................... 13

BEFORE YOU BEGIN

Thank you for selecting the IRON GRIP STRENGTH Standard Bench TSA-

5682 by IMPEX INC. For your safety and benefit, read this manual carefully

before using the machine. As a manufacturer, we are committed to provide

you complete customer satisfaction. If you have any questions, or find there

are missing or damaged parts, we guarantee you complete satisfaction

through direct assistance from our factory. To avoid unnecessary delays,

please call our TOLL-FREE customer service number. Our Customer

Service Agents will provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]m

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

CARE AND MAINTENANCE

1. Inspect and tighten all parts before using the machine.

2. The machine can be cleaned using a damp cloth and mild non-abrasive detergent.

DO NOT use solvents.

3. Maximum weight capacity 300 lbs.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE

OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL

INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.

ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE

SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS. 2

WARNING LABEL PLACEMENT

The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible, please

call customer service at 1-800-999-8899 for replacement. Apply the label in location shown.

HARDWARE PACK

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this

machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Left & Right Upright Beams (#1 & 2) by a Cross Brace (#3) in the mid-span.

Align the holes and secure each end of the Cross Brace with one 4 ¾” x 2 ¾” Bracket

(#20), two M10 x 2 ¾” Carriage Bolts (#38), two ∅¾” Washers (#26), and M10 Aircraft

Nuts (#47).

B.) Place Backrest Adjustment Bar (#8) between the two Upright Beams.

C.) Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with two

M18 Lock Knobs (#48) through selected holes to obtain desired height of the Supports.

STEP 2 (See Diagram 2)

A.) Attach Main Seat Support (#4) to the Cross Brace (#3). Secure it with a 4 3/8” x 1 ¾”

Bracket (#19), two M10 x 2 ¾” Carriage Bolts (#37), two ∅¾” Washers (#26), and two

M10 Aircraft Nuts (#47).

B.) Attach the Leg Developer Holder (#5) to the Front Stabilizer (#6). Secure it with three

M10 x 5/8” Allen Bolts (#41) and Ø ¾” Washers (#26).

C.)Attach the Leg Developer Holder to the Main Seat Support. Secure it with two M10 x 2

½” Carriage Bolts (#37), two ∅¾” Washers (#26), and M10 Aircraft Nuts (#43)

horizontally. Secure it with one M10 x 2 3/8” Carriage Bolt (#36), Ø ¾” Washer (#26)

and M10 Aircraft Nut (#47) vertically.

D.)Thread a M18 Lock Knob (#48) into the hole on the Leg Developer Holder.

DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Attach the Backrest Incline Support (#21) in between the two Backrest Supports (#13). Attach

the lower side-holes on the Backrest Supports to the pivot on the Main Seat Support (#4).

B.) Place the Backrest Board (#16) onto the Backrest Supports. Secure it with four M8 x 1 5/8”

Allen Bolts (#43) and Ø 5/8” Washers (#25).

C.)Place the Seat (#17) onto the Main Seat Support. Secure it with four M8 x 1 5/8” Allen Bolts

(#43) and Ø 5/8” Washers (#25).

D.)When using the Squat from the rear of the bench, lift up the Backrest Board to a near vertical

position and secure it with a L-shaped Pin (#49) into the open slot on the Main Seat Support.

The only purpose of the Backrest Incline Support and the Pin is to get the Backrest Board out

of the way while doing the squat exercise. They are not designed to support any weight or

perform any exercise.

STEP 4 (See Diagram 4)

A.) Attach the Leg Developer (#11) to the Leg Developer Holder. Secure it with one M10

x 2 7/8” Allen Bolt (#40), two Ø ¾” Washers (#26), and one M10 Aircraft Nut (#47).

B.) Insert one Foam Tube (#14) halfway through the hole on the Leg Developer Holder.

Push two Ø 2 ¾” Foam Rolls (#22) onto the Tube from both ends.

C.)Insert two Foam Tubes halfway through the holes on the Leg Developer. Push four Ø

4” Foam Rolls (#23) onto the Tubes from both ends. Insert four Foam Roll End Caps

(#33) into the ends.

D.)Attach the Arm Curl Pad (#18) to the Arm Curl Stand (#12). Secure it with two M8 x

5/8” Allen Bolts (#42) and Ø 5/8” Washers (#25).

E.) Pull the M18 Lock Knob (#48) and insert the Arm Curl Stand into the opening on the

Leg Developer Holder. Remove the Arm Curl Stand when doing leg exercises.

F.) Attach a Spring Clip (#24) to the weight post on the Leg Developer.DIAGRAM 4

Tabla de contenidos

Otros manuales de Gimnasio en casa de Impex

Impex

Impex MARCY CLUB MKM-81010 Manual de usuario

Impex

Impex MARCY MKB-733 Manual de usuario

Impex

Impex POWERHOUSE ELITE PHE 2000 Manual de usuario

Impex

Impex IRONGRIP IGS-04 Manual de usuario

Impex

Impex PLATINUM MARCY PM-3000 Manual de usuario

Impex

Impex Circuit Fitness AMZ-986RW-BT Manual de usuario

Impex

Impex MARCY MCB-346 Manual de usuario

Impex

Impex MARCY MP-3205 Manual de usuario

Impex

Impex MARCY MWB-544 Manual de usuario

Impex

Impex Competitor CB 610 Manual del propietario

Impex

Impex POWERHOUSE PHC 764 Manual de usuario

Impex

Impex MD-2100 Manual de usuario

Impex

Impex COMPETITOR WM-343 Manual de usuario

Impex

Impex MARCY DIAMOND ELITE MD-3401 Manual de usuario

Impex

Impex MARCY CLUB MKM-81010 Manual de usuario

Impex

Impex MARCY MWB-4300 Manual de usuario

Impex

Impex IGS-8861 Manual de usuario

Impex

Impex MARCY MCB-379 Manual de usuario

Impex

Impex MACH V Manual de usuario

Impex

Impex WM-MXS Manual de usuario

Impex

Impex Marcy MCB-999 Manual de usuario

Impex

Impex Marcy SB-512 Manual de usuario

Impex

Impex Marcy SB-662 Manual de usuario

Impex

Impex MARCY PLATINUM MP 1105 Manual de usuario

Manuales populares de Gimnasio en casa de otras marcas

Horizon Fitness

Horizon Fitness OXFORD 6 Manual de usuario

Energetics

Energetics Multi Trainer 5.1 Manual de usuario

Matrix

Matrix MG-PL Series Manual de usuario

Reebok

Reebok Tbr2i Manual de operación y mantenimiento

Weider

Weider 8300 Hard Drive Manual de usuario

Pure Fitness

Pure Fitness 8526HE Manual de usuario

Weider

Weider 8700 I Guía de inicio rápido

Bowflex

Bowflex Sport 001-6961 Manual de usuario

NordicTrack

NordicTrack E8200 Competition Bench Guía de inicio rápido

Weider

Weider WEMC10161 Manual de usuario

Body Solid

Body Solid GHYP-345 Manual de usuario

Evo

Evo TAHOE 5105 Manual de usuario

cardiobull

cardiobull RA17 Manual de usuario

ParaBody

ParaBody 40 Manual de usuario

JLL

JLL Ventus Pro Air Power Manual de usuario

Trojan

Trojan Colorado 370 Manual de usuario

Octane Fitness

Octane Fitness xRide xR650 Manual de usuario

Precor

Precor Discovery Series Manual de usuario