IFM UIT509 Manual de usuario
Operating instructions
Ultrasonic diffuse-reflection sensor
without IO-Link
UIT509
UIT512
UIT515
11487721 / 00 08 / 2018
UKUK
2
1 Preliminary note
1.1 Symbols used
►Instructions
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose (→ 3 Functions and features).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• Protect units and cables against damage.
3 Functions and features
Ultrasonic sensor for monitoring levels and detecting objects.
3
UK
4 Installation
3
4
1
2
►Secure the unit to a bracket.
1/2: status LEDs 1/2 (yellow),
setting aid and output indication
3: echo LED (green), is on when object or
background is detected
4: teach button
Sound-absorbing surfaces have a negative effect on a reliable function.
►Consider the dead zone (→ Technical data sheet):
No object detection in the dead zone.
For units with metal housing (according to UL 508):
►Observe a minimum distance of 12.7 mm between the sensor and non-
insulated live parts.
For further information please refer to www.ifm.com
→ General information about installation and operation.
5 Electrical connection
►Disconnect power.
► Connect unit (depending on the type selected):
BK: black
BN: brown
BU: blue
WH: white
BN
WH
BK
BU
4
1
3
2OUT2
L+
L
OUT1
• OUT1: switching output
• OUT2: switching output
colours to DIN EN 60947-5-2
4
6 Settings
The unit and the parameters are set via the teach button (→ 6.1).
6.1 teach button
6.1.1 Start programming mode
►Press the teach button for 2 s...6 s.
> Yellow status LEDs 1/2 flash (1 Hz), the unit is in the programming mode.
If programming has not been completed successfully, the unit returns to the
previous setting.
6.1.2 Set output response
►Start programming mode (→ 6.1.1).
► Position the object in P1 (Fig. 1 or 2).
►Press the teach button for 1 s.
> Yellow status LEDs 1/2 flash (2.5 Hz), P1 setting is completed.
► Position the object in P2 (Fig. 1 or 2).
►Press the teach button for 1 s.
> Yellow status LEDs 1/2 flash briefly (4 Hz), P2 setting is completed.
6.1.3 Invert output response
►Press the teach button for > 6 s.
> Yellow status LEDs 1/2 flash (> 10 Hz).
> Yellow status LEDs 1/2 flash briefly (> 4 Hz).
> Output function is inverted.
6.1.4 Restore factory setting
►Align the unit so that no echo is received.
> Green echo LED off.
►Start programming mode (→ 6.1.1).
►Press the teach button for 1 s.
> Yellow status LEDs 1/2 flash briefly (4 Hz), factory setting is restored.
5
UK
In case of object recognition, the following output signals are provided:
Fig. 1: Window function P1 > P2 Fig. 2: Hysteresis function P1 = P2
B P2 P1
T
B P1/P2
T
Switching outputs Complementary switching outputs
1
1
B P2 P1
1
0
0
3
4
2
B P1/P2
2
1
0
1
0
1
3
4
Inverted switching outputs Inverted switching outputs
1
1
B P2 P1
1
0
0
2
3
4
1
1
B P1/P2
1
0
0
2
3
4
1: output response
2: distance to the object
3: OUT1 (switching output)
4: OUT2 (switching output)
B: blind zone
P: taught position
T: teach button
Technical data and further information at www.ifm.com
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Accesorios de IFM
IFM
IFM PK752 Series Manual de usuario
IFM
IFM PN00 A Series Manual de usuario
IFM
IFM O5H5 Series Manual de usuario
IFM
IFM Efector 500 PF2652 Manual de usuario
IFM
IFM OGE7 Series Manual de usuario
IFM
IFM Efector 100 GG712S Manual de usuario
IFM
IFM Efector 200 OJ Manual de usuario
IFM
IFM OG Manual de usuario
IFM
IFM VSP003 Manual de usuario
IFM
IFM efector 200 OGH Manual de usuario
IFM
IFM SAxx04 Series Manual de usuario
IFM
IFM O3D3 Series Manual de usuario
IFM
IFM O5D15 Series Manual de usuario
IFM
IFM OGE Manual de usuario
IFM
IFM LDH100 Manual de usuario
IFM
IFM PN3 Series Manual de usuario
IFM
IFM PI2798 Manual de usuario
IFM
IFM PN01 A Series Manual de usuario
IFM
IFM GI854S Manual de usuario
IFM
IFM Efector 160 LK8 Manual de usuario
