IFM Efector200 O6P2 Manual de usuario

Operating instructions

Retro-reflective sensor

O6P2

O6P200 / 01 01 / 2015

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

In conjunction with a prismatic reflector or reflective tape the retro-reflective sen-

sor detects objects and materials without contact and indicates their presence by

a switching signal.

3 Installation

►Fit the prismatic reflector or the reflective tape behind the object to be detected.

►Align the retro-reflective sensor to it and secure it to a bracket.

Maximum range only with accurate alignment.

4 Operating and display elements

1: LED yellow - switching output active

2: Setting potentiometer „sensitivity“

3: LED green - operation, stability indication

4: Selector „output function“

4.1 Stability indication

The green LED is lit when the supply voltage is applied and there is sufficient

excess gain. Under these conditions the sensor receives a stable signal.

stable signal switch point stable signal

Light-on mode

LED green on off off on

LED yellow on on off off

Dark-on mode

LED green on off off on

LED yellow off off on on

5 Electrical connection

The unit must be connected by a qualified electrician.

►The national and international regulations for the installation of electri-

cal equipment must be adhered to.

►Ensure voltage supply to EN 50178.

►Disconnect power.

►Connect the unit as follows:

5.1 PNP

Connector M12 pigtail Cable *





















Connector M8 3-pin Connector M8 4-pin





















* Core colours: BN = brown, BU = blue, BK = black

5.2 NPN

Connector M12 pigtail Cable *

L+

Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

6 Settings

6.1 Set the output function

►Setting D: dark-on mode

►Setting L: light-on mode

6.2 Set the sensitivity

►Increase sensitivity: turn the setting

screw of the potentiometer clockwise.

►Decrease sensitivity: turn the setting

screw of the potentiometer anti-

clockwise.

7 Operation

►Check whether the unit operates correctly.

> The green LED is lit when the supply voltage is applied and there is sufficient

excess gain.

> Dark-on mode: the output is switched / the yellow LED is lit when an object is

detected.

> Light-on mode: the output is switched / the yellow LED is lit when no object is

detected.

8 Maintenance, repair, disposal

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic parts.

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at unter www.ifm.com

Tabla de contenidos

Otros manuales de Accesorios de IFM

IFM

IFM PM11 Manual de usuario

IFM

IFM SDP110 Manual de usuario

IFM

IFM O2D51 Series Manual de usuario

IFM

IFM O5H5xA Series Manual de usuario

IFM

IFM LMT 0 Series Manual de usuario

IFM

IFM Efector 200 O7E2 Series Manual de usuario

IFM

IFM Efector 200 OJ Manual de usuario

IFM

IFM OGD582 Manual de usuario

IFM

IFM PN3 Series Manual de usuario

IFM

IFM OJ51 Series Manual de usuario

IFM

IFM Efector 500 PY2068 Manual de usuario

IFM

IFM JN2101 Manual de usuario

IFM

IFM O1D100 series Manual de usuario

IFM

IFM OID20 Series Manual de usuario

IFM

IFM PL205 Series Manual de usuario

IFM

IFM efector200 OOF Series Manual de usuario

IFM

IFM O3D300 Manual de usuario

IFM

IFM O5E7 Series Manual de usuario

IFM

IFM Efector 200 OJ51 Series Manual de usuario

IFM

IFM UGR500 Manual de usuario

IFM

IFM O5D15 Series Manual de usuario

IFM

IFM GI854S Manual de usuario

IFM

IFM Efector 160 LR70 Manual de usuario

IFM

IFM OMH551 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

IFM efector200 O6P2 Manual de usuario

Manuales populares de Accesorios de otras marcas