IFM OID20 Series Manual de usuario

Operating instructions

Optical distance sensor

OID20x

80284285 / 00 04 / 2019

Contents

1 Preliminary note��3

1�1 Symbols used ��3

1�2 Warning signs used ��3

2 Safety instructions ��3

3 Functions and features ��5

3�1 Applications ��5

4 Installation��5

4�1 Installation conditions ��5

5 Electrical connection��5

6 Setting / Operation��6

7 IO-Link ��7

7�1 General information ��7

7�2 Device-specific information��7

7�3 Parameter setting tools��7

8 Maintenance, repair and disposal��7

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference�

Information

Supplementary note�

1.2 Warning signs used

WARNING

Warning of serious personal injury�

Death or serious irreversible injuries may result�

2 Safety instructions

• Please read this document prior to set-up of the unit� Ensure that the product is

suitable for your application without any restrictions�

• Improper or non-intended use may lead to malfunctions of the unit or to

unwanted effects in your application� That is why installation, electrical

connection, set-up, operation and maintenance of the unit must only be carried

out by qualified personnel authorised by the machine operator�

• In case of malfunction of the unit please contact the manufacturer� If the unit is

tampered with and/or modified, any liability and warranty is excluded�

• The unit conforms to the standard EN 61000-6-4� The unit may cause radio

interference in domestic areas� If interference occurs, the user must take

appropriate remedial actions�

WARNING

Visible laser light; laser protection class 2�

Use of controls or adjustments other than those specified herein may result in hazardous

radiation exposure� Damage to the retina is possible�

►Do not stare into the laser beam!

►Apply the enclosed labels (laser warning) in the immediate vicinity of the unit�

►Adhere to the caution and warning notes on the product label�

►Use the enclosed label for the power supply cable�

►EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014 complies with 21 CFR 1040

except for deviations pursuant to Laser Notice No� 50, dated June 2007

Label for supply cable

D-45128 Essen

Product label

OUT

OID2xxPOWER CLASS 2

LASER PRODUCT www.ifm.com TS AA 1301

3 Functions and features

The unit is used as an optical distance sensor�

3.1 Applications

• The optical distance sensor measures distances between 0�03 and 2 m�

• It has a background suppression of up to 20 m�

• The switching outputs are complimentary�

The distance between the sensor and the background must be limited

to max� 20 m by the customer� Otherwise the measured value may be

ambiguous. → 4.1 Installation conditions

4 Installation

4.1 Installation conditions

►Install the unit so that the object to be detected is within a measuring range of

0�03��2 m�

Any object between the set switch point and a distance of 20 m from the sensor is

suppressed�

Reflecting objects in the direct beam path of the sensor - also in the range

> 20 m – are to be avoided by the customer� Otherwise the measured

values may be ambiguous�

5 Electrical connection

The unit must be connected by a qualified electrician�

►The national and international regulations for the installation of electrical

equipment must be adhered to�

►Ensure voltage supply according to EN 50178, SELV, PELV�

►Disconnect power�

►Connect the unit as follows:

DC PNP

























4: OUT1 = normally open / IO-Link

2: OUT2 = normally closed

DC NPN

























4: OUT1 = normally open / IO-Link

2: OUT2 = normally closed

Core colours of ifm sockets:

1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black)

6 Setting / Operation

OUT1

PNP

100 mA

PNP

OUT2

100 mA

1: Setting marks

2: Yellow LED: Set1 value reached, output = ON

3: Locking ring

4: Setting ring (manually adjustable after unlocking)

5: Green LED: supply voltage O�K�

• To obtain the setting accuracy: Set the ring to the maximum value, then set the

requested value�

►After mounting, wiring and programming check whether the unit operates correctly�

Lifetime of a laser diode: 50,000 hours

7 IO-Link

7.1 General information

This unit has an IO-Link communication interface which requires an IO-Link-

capable module (IO-Link master) for operation�

The IO-Link interface enables direct access to the sensor values and parameters

and provides the possibility to set the parameters of the unit during operation�

In addition communication is possible via a point-to-point connection with a USB

adapter cable�

You will find more detailed information about IO-Link at www�ifm�com�

7.2 Device-specific information

You will find the IODDs necessary for the configuration of the IO-Link unit and

detailed information about sensor values, diagnostic information and parameters

in the overview table at www�ifm�com�

7.3 Parameter setting tools

You will find all necessary information about the required IO-Link hardware and

software at www�ifm�com�

8 Maintenance, repair and disposal

Faulty sensors must only be repaired by the manufacturer�

►Keep the front lens of the sensor free from soiling�

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations�

►Do not try to open the module enclosure� There are no user-serviceable

components inside�

Technical data and further information at www�ifm�com

Tabla de contenidos

Otros manuales de Accesorios de IFM

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario