IFM Efector 200 O6E4 Manual de usuario

Operating instructions

Through-beam sensor

O6E4 / O6S4

O6E400 / 00 10 / 2015

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

3 Installation

Transmitter Receiver

►Install the receiver (O6E...) and secure it to a bracket.

►Align the transmitter (O6S...) to the receiver and fix it.

Maximum range only with accurate alignment.

4 Operating and display elements

1: LED green - operation

Transmitter

1: LED yellow - switching output active

2: Setting potentiometer „sensitivity“

3: LED green - operation

4: Selector „output function“

Receiver

4.1 Stability indication

The green LED is lit when the supply voltage is applied and the sensor signal is

stable.

stable signal switch point stable signal

Light-on mode

LED green on off off on

LED yellow on on off off

Dark-on mode

LED green on off off on

LED yellow off off on on

5 Electrical connection

The unit must be connected by a qualified electrician.

►The national and international regulations for the installation of electri-

cal equipment must be adhered to.

►Ensure voltage supply to EN 50178.

►Disconnect power.

►Connect the unit as follows:

5.1 Transmitter

Connector M12 pigtail Cable *

L+









Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

5.2 Receiver

5.2.1 PNP

Connector M12 pigtail Cable *





















Connector M8 3-pin Connector M8 4-pin





















* Core colours: BN = brown, BU = blue, BK = black

5.2.2 NPN

Connector M12 pigtail Cable *

L+

Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

6 Settings

6.1 Set the output function

►Setting D: dark-on mode

►Setting L: light-on mode

Receiver

6.2 Set the sensitivity

►Increase sensitivity:

turn the setting screw of the potenti-

ometer clockwise.

►Decrease sensitivity:

turn the setting screw of the potenti-

ometer anti-clockwise.

Receiver

7 Operation

►Check whether the unit operates correctly.

> The green LED is lit when the sensor is ready for operation.

> Dark-on mode: the output is switched / the yellow LED is lit when an object is

detected.

> Light-on mode: the output is switched / the yellow LED is lit when no object is

detected.

8 Maintenance, repair, disposal

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic parts.

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at unter www.ifm.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de IFM

IFM

IFM JD Guía de aplicación

IFM

IFM Efector500 PY7102 Manual de usuario

IFM

IFM PI22 Series Manual de usuario

IFM

IFM Efector 200 O5PG Manual de usuario

IFM

IFM Efector 200 OGH2 Series Manual de usuario

IFM

IFM efector 200 OGH Manual de usuario

IFM

IFM Efector 200 OG Manual de usuario

IFM

IFM OGH3 Series Manual de usuario

IFM

IFM PT24 Series Manual de usuario

IFM

IFM OY4**S Series Manual de usuario

IFM

IFM O5H5 Series Manual de usuario

IFM

IFM efector 200 O4P2 Series Manual de usuario

IFM

IFM LMT 0 Series Manual de usuario

IFM

IFM PN72 Series Manual de usuario

IFM

IFM OGH Manual de usuario

IFM

IFM OMH551 Manual de usuario

IFM

IFM UGT20 Series Manual de usuario

IFM

IFM SAxx04 Series Manual de usuario

IFM

IFM OJ51 Series Manual de usuario

IFM

IFM efector 200 O4H5 Series Manual de usuario

IFM

IFM Efector 200 OM Manual de usuario

IFM

IFM SI 5000 Manual de usuario

IFM

IFM O5H5xA Series Manual de usuario

IFM

IFM O1D120 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario