ICP DAS USA ET-M8194H Manual de instrucciones
ET-M8194H
Motion Control Module
Quick Start Manual
(Version 2.0)
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
1
Contents
1. ET-M8194H Features ............................................................2
2. Hardware Wiring...................................................................3
3. Install ET_M8194H Toolkit ...................................................4
4. Network Settings..................................................................5
5. ET-M8194H LED Description .............................................11
6. Using the EzMove to write macro programs ...................12
6.1 How to write macro programs.................................................14
6.2 Establish a connection with the ET-M8194H .........................17
6.3 Download and run the macro program..................................18
6.4 MODBUS message window.....................................................21
6.5 Initialization table.....................................................................22
6.6 FRnet DI table...........................................................................23
6.7 IO Status table ..........................................................................25
6.8 MACRO State table...................................................................26
7. Use VB to write macro programs......................................27
1. ET-M8194H Features
ET-M8194H is a product of ICP DAS to implement the Ethernet remote
motion controller for the remote motion solution. It includes an i-8094H module
(a 4-axis stepping/pulse-type servo motor control module). By using the
intelligent function of ET-M8194H, we can do the remote motion control for
various motion applications via MODBUS/TCP.
Also, ET-M8194H can be applied in many platforms with MODBUS/TCP
protocol (for example: PC, PAC, PLC, HMI). Additionally, it is easy and simple to
use many ET-M8194Hs at the same time to implement the multi-axis motion
control by the serial connection of ET-M8194H. ICP DAS also provides EzMove
Utility and API Library for users to quickly configure ET-M8194H and develop
their own control applications easily.
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
2
2. Hardware Wiring
Power Connection
Connect power supply +Vs (24 VDC) and GND pin to the ET-M8194H +Vs
and IGND pin.
Methods of connecting PC to ET-M8194H
There are two ways to establish a connection between PC and ET-M8194H:
a. LAN:
Connect the ET-M8194H and PC through local area network (LAN) by
Hub/Switch. Install EzMove on the PC and use this utility to test the connection.
b. Direct link:
Connect the PC directly to ET-M8194H. The Ethernet cable does not have to
be a cross-over cable; the controller can detect the connection and do the
suitable configuration automatically.
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
3
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
4
3. Install ET_M8194H Toolkit
Please execute ET_M8194H_V2_0.exe in the shipping disc. Follow the
prompts to complete the installation process. The default installation path is
C:\ICPDAS\ET_M8194H\.
Installation folder \ICPDAS\ET-M8194H\ description
\API_Lib_Demo \Demo VC6、VB6 and BCB example
\Lib VC、VB and BCB lib
\Include VC and BCB header file
\EzMove_Utility \Demo MP example
EzMove_Utility_V2.0.exe EzMove Utility
EM94H_XY.EXE ET-M8194H firmware；XYrepresent
Ver. X.Y
autoexec.bat ET-M8194H autoexec.bat
ET_M8194H_API.dll DLL
\Manual ET-M8194H_Manual_v2.0.pdf ET-M8194H instruction manual
ET-M8194H_QuickStart_v2.0.pdf ET-M8194H quick start
EzMove Utility_v1.0.pdf EzMove instruction manual
\Other \OCX ET-M8194H OCX
FAQ FAQ
Readme.txt Readme
WhatsNew.txt New version information
After the installation you can find the following items in the [Start]–>
[Programs] –> [ET-M8194H] –> [Sources] folder.
[Start]– [Programs]– [ET-M8194H] –[Sources] description
\API_Lib_Demo \Demo VC6、VB6 and BCB example
\Lib VC、VB and BCB lib
\Include VC and BCB header file
\EzMove_Utility \Demo MP example
EzMove_Utility_V2.0.exe EzMove Utility
EM94H_XY.EXE ET-M8194H firmware；XYrepresent
Ver. X.Y
autoexec.bat ET-M8194H autoexec.bat
ET_M8194H_API.dll DLL
\Manual ET-M8194H_Manual_v2.0.pdf ET-M8194H instruction manual
ET-M8194H_QuickStart_v2.0.pdf ET-M8194H quick start
EzMove Utility_v1.0.pdf EzMove instruction manual
\Other \OCX ET-M8194H OCX
FAQ FAQ
Readme.txt Readme
WhatsNew.txt New version information
4. Network Settings
Method 1 – Setting via RS-232
Execute the EzMove Utility and start the “Network Settings by COM Port”
dialog. ([Setting] –> [ET-M8194H Setting] –> [By COM Port] –> [Network])
Click Default to show the default IP configuration of ET-M8194H:
IP: 192.168.0.16
Mask: 255.255.255.0
Gateway: 192.168.0.254
The procedures to read/modify the IP configuration are:
1. Shut down the ET-M8194H.
2. Connect to ET-M8194H with the associated RS-232 cable (CA-0910). The
Tx, Rx and GND pins of CA-0910 are connected to the Rx, Tx and GND
ports of ET-M8194H. Please connect the other end (9-pin, D-sub
connector) to the normal COM port of desktop/laptop.
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
5
3. Set the DIP-switch to “Init”, then power up the ET-M8194H.
4. Choose the COM Port, and then click the Get button to read back the IP
configuration.
5. Fill the settings in IP, Mask and Gateway fields, and then click the Set
button to change the IP configuration.
6. Click the Default button and then click the Set button to restore the
default IP configuration.
7. Shut down the ET-M8194H, and set the DIP-switch to “Run”.
8. Power up the ET-M8194H.
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
6
Method 2 – Setting via Ethernet
Execute the EzMove Utility and connect to ET-M8194H with Ethernet. Start
the “ET-M8194H Setting by Ethernet” dialog. ([Setting] –> [ET-M8194H
Setting] –> [By Ethernet] –> [Network Tab])
Get Setting : Read the current IP configuration from ET-M8194H.
Set : Fill the new settings in IP, Mask and Gateway fields. Click this button to
start IP configuration. The configuration will be completed in 10 seconds,
and the EzMove Utility will re-connect to ET-M814H with updated IP
address.
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
7
Method 3 – Setting via MiniOS7 Utility
The steps for using MiniOS7 Utility to setting up a network:
1. Shut down the ET-M8194H.
2. Set the DIP-switch to “Init”, then power up the ET-M8194H.
3. Click the triangle arrow symbol beside "Connection" and then press "Search"
as shown below.
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
8
4. Click the Search button to read the current IP address as shown below.
5. Click IP setting button and then enter IP and other settings. Press Set
button to complete the change IP.
ICP DAS ET-M8194H 快速入門指南
Version 2.0, 2012/10/12
9
Tabla de contenidos
Otros manuales de Controladores de ICP DAS USA
ICP DAS USA
ICP DAS USA I-7188EG Manual de usuario
ICP DAS USA
ICP DAS USA TPD-283U-H Manual de usuario
ICP DAS USA
ICP DAS USA CAN-8123 Manual de usuario
ICP DAS USA
ICP DAS USA VPD Series Manual de usuario
ICP DAS USA
ICP DAS USA WISE-5801 Guía del usuario
ICP DAS USA
ICP DAS USA WISE-2841 Series Manual de usuario
ICP DAS USA
ICP DAS USA XP-9 88-IoT Series Manual de usuario
ICP DAS USA
ICP DAS USA I-7188XB Series Manual de usuario
ICP DAS USA
ICP DAS USA I-8091 Manual de usuario
ICP DAS USA
ICP DAS USA PISO-CAN200 Manual de usuario
ICP DAS USA
ICP DAS USA tWF-DA1PD2R1 Manual de usuario
ICP DAS USA
ICP DAS USA TPD-433F Manual de usuario
ICP DAS USA
ICP DAS USA WISE-75 M Series Manual de usuario
ICP DAS USA
ICP DAS USA WP-8000-CE7 Series Manual de usuario
ICP DAS USA
ICP DAS USA ISaGRAF PAC Series Manual de usuario
ICP DAS USA
ICP DAS USA I-8431 Manual de usuario
ICP DAS USA
ICP DAS USA 7188XA Instrucciones de uso
ICP DAS USA
ICP DAS USA SMS-531 Manual de usuario
ICP DAS USA
ICP DAS USA LinPAC-5000 Manual de usuario
ICP DAS USA
ICP DAS USA 7188XA Manual de usuario
