ICP DAS USA TSH-734 Manual de usuario

Technical support: service@icpdas.com P1

tSH-73x Series Quick Start

v1.0, Feb. 2018

What’s in the box?

Related Information

The package includes the following items:

tSH-73x Series

Module x1

Quick Start x1

(This Document)

CA-002 Cable x1

tSH Series Product Page:

Documentation & Firmware:

NS-205/NS-205PSE Product Page (optional):

Technical support: service@icpdas.com P2

1 Connecting the Power and Host PC

1) Make sure your PC has workable network settings.

Disable or well configure your Windows firewall andAnti-Virus firewall first,

else the “Search Servers” on Chapter 4 may not work. (Please contact

with your system Administrator)

2) Connect both the tSH-73x and your PC to the same sub network or the

same Ethernet switch.

3) Supply power (PoE or +12~+48 VDC)to the tSH-73x.

Technical support: service@icpdas.com P3

2 Installing Software on Your PC

Install eSearch Utility, which can be obtained from the web site:

http://ftp.icpdas.com/pub/cd/tinymodules/napdos/software/esearch/

Connecting the Master and Slave Devices

Connect the serial port of 2 PC (Master) to COM2/COM3 of the tSH-73x (e.g., tSH-734).

Connect the Modbus device (Slave, e.g., M-7022, optional) to COM1 on the

tSH-73x (e.g., tSH-734)

Supply power (+10 ~+30 V

) to the Modbus device (e.g., M-7022, Device ID: 1)

Note: The wiring and supply power method depends on your Modbus device.



Technical support: service@icpdas.com P4

4 Configuring Network Settings

1) Double click the eSearch Utility shortcut on the desktop.

2) Click the “Search Servers” button to search your tSH-73x.

3) Double click the name of tSH-73x to open the “Configure Server (UDP)”

dialog box.

Factory Default Settings of tSH-73x:

IP Address

192.168.255.1

Subnet Mask

255.255.0.0

Gateway

192.168.0.1

4) Contact your Network Administrator to obtain a correct network

configuration (such as IP/Mask/Gateway). Enter the network settings

and click “OK”. Note: The tSH-73x will use the new settings 2

seconds later.









Technical support: service@icpdas.com P5

5) Wait 2 seconds and click “Search Servers”button again to ensure the

tSH-73x is working well with new configuration.

6) Click the name of tSH-73x to select it.

7) Click the “Web”button to log in to the web configuration pages.

(Or enter the URL address of the tSH-73x in the address bar of the

browser.)

5 Configuring the Application Mode







Technical support: service@icpdas.com P6

1) Enter the password (use

the default password

“admin”) in the Login

password field and click

the “Submit”button.

2) Click the “Application Mode”tab to display the Application Mode

Settings page.

3) Check the “Mode 2: Modbus Sharer”option.

4) Select Port1 (since our M-7022 slave device is connected on this port)

from the “Slave Device Connected on:”option button.

5) Enter the timeout value of the Port1 (e.g. “500”)in the “Slave Timeout

(ms)”field and click the “Submit”button to save your settings.

Use the default

password: admin











Technical support: service@icpdas.com P7

6 Configuring the Serial Port

1) Click the “Port1”tab and select the appropriate Baud Rate and Data

Format settings depending on the M-7022 (Slave) from the relevant drop

down options. (e.g. Baud Rate: 115200 and Data Format: 8, None, 1)

2) Click the “Submit”button to save your settings.

3) Click the “Port2/Port3”tab and select the appropriate Baud Rate and

Data Format settings depending on the serial COM Port of PC (Master

#1/Master #2) from the relevant drop down options. (e.g. Baud Rate:

9600 and Data Format: 8, None, 1)

4) Click the “Submit”button to save your settings.









Technical support: service@icpdas.com P8

7 Self-Test

1) In the eSearch Utility, select

the “Modbus RTU Master”

item from the “Tools”menu to

open the Modbus RTU Master

Utility.

2) In the Modbus RTU Modbus Utility, select your COM port, Baud Rate and Data

Format (e.g. COM1/9600/N,8,1) on the PC (Master) and then click the “Open”

button in the “COM status”section.

3) Refer to “Protocol Description” section and type the command in the

“Command” field then click the “Send command” button. If the response data

is correct, it means the test is success.







Please ensure that the Timeout value in the

window should larger than 2 times the

Slave

timeout setting in the tSH-73x module.

The Modbus command settings

depends on your Modbus device.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de ICP DAS USA

ICP DAS USA

ICP DAS USA PROFI-5045 Manual de usuario

ICP DAS USA

ICP DAS USA tM-P3R3 Manual de usuario

ICP DAS USA

ICP DAS USA LP-8 4 Series Instrucciones generales

ICP DAS USA

ICP DAS USA tSG-3781B Manual de usuario

ICP DAS USA

ICP DAS USA I-8123W Guía de configuración

ICP DAS USA

ICP DAS USA GPS-721-MRTU Manual de usuario

ICP DAS USA

ICP DAS USA ET-7015 Manual de usuario

ICP DAS USA

ICP DAS USA ET-7218Z Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2000 Series Manual de usuario

ICP DAS USA

ICP DAS USA tPET-P6 Manual de usuario

ICP DAS USA

ICP DAS USA I-7080 Manual de usuario

ICP DAS USA

ICP DAS USA GW-7552-M Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-201x EtherCAT Slave I/O Manual de usuario

ICP DAS USA

ICP DAS USA WP-5231 Manual de usuario

ICP DAS USA

ICP DAS USA SP-S2-DS Manual de usuario

ICP DAS USA

ICP DAS USA M-7065 Manual de usuario

ICP DAS USA

ICP DAS USA LP-8 21 Series Manual de usuario

ICP DAS USA

ICP DAS USA ET-2200 Series Manual de usuario

ICP DAS USA

ICP DAS USA I-7083 Manual de usuario

ICP DAS USA

ICP DAS USA ET-2260 Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2012H Manual de usuario

ICP DAS USA

ICP DAS USA I-7080 Manual de usuario

ICP DAS USA

ICP DAS USA ZT-257 Series Manual de usuario

ICP DAS USA

ICP DAS USA ZT-2017 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario

ICP DAS USA tSH-734 Manual de usuario

Manuales populares de Unidad de control de otras marcas