ICP DAS USA ET-2260 Manual de usuario

Technical support: servic[email protected] P1

ET-2260 Quick Start

v1.2, Jun. 2018

What’s in the box?

Related Information

The package includes the following items:

ET-2260 Module x 1

Quick Start x1

(This Document)

ET-2200 Series Product Page:

Documentation & Firmware:

NS-205/MDR-20-24 Product Page (optional):

Technical support: servic[email protected] P2

Connecting the Power and Host PC

1) Make sure your PC has workable network settings.

Disable or well configure your Windows firewall and Anti-Virus firewall first,

else the “Search Servers” on Chapter 5 may not work. (Please contact

with your system Administrator)

2) Connect both the ET-2260 and your PC to the same sub network or the

same Ethernet switch.

3) Supply power (+10~+30 VDC) to the ET-2260.

4) Verify that the “PWR”LED indicator

on the ET-2260 is flashing.

Red, OK

Technical support: servic[email protected] P3

2 Pin Assignments & Wiring Note

Pin Assignments:

Wire Connections:

Readback as 1 Readback as 0

+10 ~ +50 VDC OPEN or <4 VDC

Digital Input/

Counter

Sink

Source

To other channels

10K

DICOM

DIx

To other channels

10K

DICOM

DIx

To other channels

10K

DICOM

DIx

To other channels

10K

DICOM

DIx

Relay Close

Open

Close to GND

Dry

Contact

Relay Open

NOx

COMx

LOAD

AC/DC

Readback as 1

Readback as 0

Power Relay

ON State

OFF State

NOx

COMx

LOAD

AC/DC

To other channels

GND

DIx

+S5 V GND

DIx

+S5 V

Technical support: servic[email protected] P4

3 Wiring the DI and DO for Self-test

A tip for connecting the wire to the connector

A tip for removing the wire from the connector

1) Connect the NO0 pin (Pin01) to the GND pin (Pin02).

2) Connect the COM0 pin (Pin03) to the DI0 pin (Pin04).

NO0 01

COM0 02

02 GND

04 DI0

Technical support: servic[email protected] P5

4 Modbus Address

(0xxxx) DO address:

Begin

address

Points

Description

Bits

Per

Point

Range

Access

Type

0 (0x0)

1~6

Digital Output Channels

0: OFF, 1: ON

R/W

32 (0x20)

Clears the status of all high

latched DI channels

1: Clear

33 (0x21)

Clears the status of all low

latched DI channels

1: Clear

190

(0xBE)

1~6

Enables frequency

measurement for all DI

Channels

0: Disable

1: Enable

(Default: 0)

R/W/F

235

(0xEB)

1~6

Sets the Power-on value for

all DO Channels

0: OFF, 1: ON

(Default: 0)

R/W/F

267

(0x10B)

1~6

Sets the Safe value for all DO

Channels

0: OFF, 1: ON

(Default: 0)

R/W/F

“R”: Read; “W”: Write; “F”:Settings are recorded in flash memory by default

(1xxxx) DI address:

Begin

address

Points

Description

Bits

Per

Point

Range

Access

Type

(0x0)

1~6

Digital Input

0:Off

1:On

(0x20)

1~6

Digital latched status (high)

0:no

1:latched

(0x40)

1~6

Digital latched status (low)

0:no

1:latched

“R”: Read

Note

For detail “DI/DO Modbus Address”information, refer to Section 6.3 Modbus Register Table

of user’s manual

(http://ftp.icpdas.com/pub/cd/6000cd/napdos/et2200/document/).

Technical support: servic[email protected] P6

5 Configuring Network Settings

1) Run the eSearch Utility.

The eSearch Utility is located at:

http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/

2) Click the “Search Servers”to search your ET-2260.

3) Double-click your ET-2260 to configure the settings

Factory Default Settings of ET-2260:

IP Address

192.168.255.1

Subnet Mask

255.255.0.0

Gateway

192.168.0.1

4) Contact your Network Administrator to obtain a correct network

configuration (such as IP/Mask/Gateway). Enter the network settings

and click “OK”.

Note: The ET-2260 will use the new settings 2 seconds

later.









Technical support: servic[email protected] P7

6 Testing your Ethernet I/O Module

1) Wait 2 seconds and click “Search Servers”button again to ensure the

ET-2260 is working well with new configuration.

2) Click the name of ET-2260 to select it.

3) Click the “Web”button to log in to the web configuration pages.

(Or enter the URL address of the ET-2260 in the address bar of the

browser.)

4) Enter the password (default: Admin)in the “login password”field and

click “Submit”.







Use the default

password: Admin



Technical support: servic[email protected] P8

5) In the “Home”page allows a simple test to be performed to verify the Digital

Input and Output functionality.

6) In the “Digital I/O”section, click the “DO0”button to ON (Red).

7) The corresponding DI becomes green for DI0 is ON.







Otros manuales para ET-2260

Tabla de contenidos

Otros manuales de Unidad de control de ICP DAS USA

ICP DAS USA

ICP DAS USA I-8213W-4G Manual de usuario

ICP DAS USA

ICP DAS USA ET-7000 series Manual de usuario

ICP DAS USA

ICP DAS USA ZT-2570 Manual de usuario

ICP DAS USA

ICP DAS USA 7188EN Guía de instalación

ICP DAS USA

ICP DAS USA tET-P6 Manual de usuario

ICP DAS USA

ICP DAS USA tGW-700 Series Manual de usuario

ICP DAS USA

ICP DAS USA M-7019Z Manual de usuario

ICP DAS USA

ICP DAS USA DS-2200 Series Manual de usuario

ICP DAS USA

ICP DAS USA PM-3133-RCT Series Manual de usuario

ICP DAS USA

ICP DAS USA ET-2200 Series Manual de usuario

ICP DAS USA

ICP DAS USA tM-TH8 Manual de usuario

ICP DAS USA

ICP DAS USA ZT-2055 Manual de usuario

ICP DAS USA

ICP DAS USA EIP-2000 Series Guía de instalación

ICP DAS USA

ICP DAS USA EIP-2060 Manual de usuario

ICP DAS USA

ICP DAS USA ZT-2053 Manual de usuario

ICP DAS USA

ICP DAS USA I-8026W Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2012H Manual de usuario

ICP DAS USA

ICP DAS USA SG-3227 Manual de usuario

ICP DAS USA

ICP DAS USA ECAT-2051 Manual de usuario

ICP DAS USA

ICP DAS USA EIP-2000 Series Manual de usuario

ICP DAS USA

ICP DAS USA MDC-700 Series Manual de usuario

ICP DAS USA

ICP DAS USA M-7033D Manual de usuario

ICP DAS USA

ICP DAS USA M-7028 Manual de usuario

ICP DAS USA

ICP DAS USA ET-87P2 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario