IBM N2225 Manual de usuario

Quick Installation Guide

N2225 and N2226 SAS/SATA HBAs for IBM System x

N2225

N2226

Thank you for purchasing the

N2225 HBA and/or N2226 HBA.

Please take a few minutes to read

this quick installation guide

before you install the HBAs.

For more information about any

topic covered in this guide, refer

to the N2225and N2226

SAS/SATA HBAs IBM System x

Hardware User’s Guide.

To install the N2225 HBA or the N2226 HBA, follow these steps:

1. Unpack the HBA, and inspect it for damage. Unpack the HBA in a static-free environment.

Touch the static-protective package that contains the HBA to any unpainted surface on the

outside of the server; then, grasp the HBA by the top edge or upper corners, remove it from

the package, and inspect it for damage. Contact your IBM marketing representative or

authorized reseller if the HBA appears to be damaged.

2. Prepare the server. Turn off the server, and remove the power cord from the rear of the

power supply.

3. Remove the cover from the chassis.

4. Check the mounting bracket on the HBA (system-dependent). If required for your

system, replace the full-height mounting bracket that ships on the HBA with the low-profile

bracket supplied. Save and reuse the two screws that attach the long bracket to attach the

short bracket.

ATTENTION: Make a backup of your data before changing your system

configuration to avoid the risk of data loss.

First Edition April 2014

IBM, the IBM logo, ibm.com, and System x are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide.

Printed in USA

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM P/N: 00FH246

5. Insert the HBAs in an available PCIe® slot. Locate an empty x8 PCIe slot. Remove the blank bracket

panel on the rear of the computer that aligns with the empty PCIe slot. Save this bracket screw, if

applicable. Align the HBA to a PCIe slot. Press down gently, but firmly, to seat the HBA correctly in the

slot. The following figures show how to insert the HBAs into the available PCIe slots.

Insert an N2225 HBA in a PCIe Slot

6. Secure the HBA bracket to the system chassis. Install the bracket screw, if applicable, or engage

the system retention mechanism to secure the HBA to the system chassis.

7. Connect the auxiliary power cable to the HBA only if auxiliary power is required with your

system design. This step is applicable for the N2226 HBA only.

8. Replace the cover of the chassis.

9. Connect SAS cables between the HBA and the SAS enclosure that contains SATA or SAS

devices. The N2225 HBA has two SFF-8644, external x4 mini-SAS HD connectors. The N2226 HBA has

four SFF-8644, external x4 mini-SAS HD connectors. Use a cable with an external mini-SAS HD

connector (SFF-8644) on one end (to connect to the HBA) and the appropriate connector to attach to

the enclosure that contains SAS or SATA devices on the other end.

10. Replace the cover and any power cords, and power up the system. Replace the system cover,

reconnect any power cords, and reconnect any network cables. Turn on the power.

NOTE: The shape, size, and locations of the components on your HBAs and its bracket

might vary from this illustration. The HBA requires a x8 PCIe slot.

B

(GJHRI+RVW%RDUG

%LW6ORWV

92QO\

3&,([SUHVV

[6ORW

%LW6ORW

92QO\

%UDFNHW

6FUHZ

3UHVV

+HUH

3UHVV

+HUH

7R'ULYH

(QFORVXUHV

0LQL6$6+'

([WHUQDO

&RQQHFWRUV

TECHNICAL SUPPORT

For assistance installing, configuring, or

using the HBA, go to

http://www.ibm.com/supportportal/

Insert an N2226 HBA in a PCIe Slot

B

(GJHRI+RVW%RDUG

3&,([SUHVV[6ORW

%UDFNHW

6FUHZ

3UHVV

+HUH

3UHVV

+HUH

7R'ULYH

(QFORVXUHV

0LQL6$6+'

([WHUQDO

&RQQHFWRUV

Otros manuales para N2225

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de IBM

IBM

IBM AIX HACMP SG24-5131-00 Instrucciones de uso

IBM

IBM WebSphere DataPower 7198 Manual de usuario

IBM

IBM SA23-1325-01 Guía

IBM

IBM QuickOn for Running Windows Manual de usuario

IBM

IBM 1 GB Microdrive Storage Card Manual de usuario

IBM

IBM Power System 5105-22E Manual de usuario

IBM

IBM MPC603EC Manual de usuario

IBM

IBM ATA 133 Manual de usuario

IBM

IBM Power System 9009-41A Manual de usuario

IBM

IBM 4381 Manual de usuario

IBM

IBM 6611 Manual de usuario

IBM

IBM QLogic 4Gb Fibre Channel Expansion Card Manual de usuario

IBM

IBM 55PUS8118 SCSI-2 Manual de usuario

IBM

IBM EMX0 PCIe3 Manual de instrucciones

IBM

IBM System x3630 M4 Manual de usuario

IBM

IBM 3745 Series Manual de instrucciones

IBM

IBM Redbooks 2/4 Port Ethernet Expansion Card Manual de usuario

IBM

IBM M791 Series Manual de usuario

IBM

IBM 3290 T Manual de instrucciones

IBM

IBM 9125-F2C Manual de usuario

IBM

IBM TSO/E REXX Manual de usuario

IBM

IBM PowerPC 405GP Manual de usuario

IBM

IBM System x Education M5000 Series Manual de usuario

IBM

IBM THINKCENTER 8128 Manual del propietario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario