HP StorageWorks 8/8 - SAN Switch Manual de instrucciones

HP StorageWorks Fabric OS 6.2.0g

release notes

Part number: 5697-0355

Third edition: March 2010

Legal and notice information

Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212,

Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S.

Government under vendor's standard commercial license.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the

express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Microsoft and Windows are U. S. registered trademarks of Microsoft Corporation.

Version

6.2.0g

NOTE:

This software conforms to the Fibre Channel standards and to accepted engineering practices and

procedures.

Effective date

May 2009

Description

Fabric OS 6.2.0b introduced support for the HP StorageWorks Encryption SAN Switch and the HP

DC Switch Encryption FC Blade. Fabric OS 6.2.0g continues this support. These products provide

the following features:

•Data encryption support for B-series fabrics

•Key management support for HP Secure Key Manager (SKM)

Fabric OS 6.2.0a integrated the following new features (these features continue to be supported in

Fabric OS 6.2.0g):

•Support for the HP StorageWorks DC04 SAN Director

•192 ports, 8–Gb technology in 8U chassis (without required front airflow mounting kit, 9U

with kit)

•Supports existing 8–Gb FC blades (16, 32, and 48 port)

•Supports existing 10–Gb 6 port ISL blade

•Supports existing Multi-protocol Router blade

•Supports ICL connectivity to other DC04 and DC SAN Backbone directors

•Virtual Fabrics (VF)

•Full VF feature support on HP StorageWorks DC SAN Backbone Director, HP StorageWorks

DC04 SAN Director, HP StorageWorks 8/80 SAN Switch, and HP StorageWorks 8/40 SAN

Switch.

•Single physical chassis that can be subdivided into two or more logical switches, creating a

logical fabric with other switches.

•Per-port assignment of ports to logical switches

•Shared ISLs providing connectivity for multiple logical fabrics

•FCR and FCIP enhancements

•FCIP (SCSI) read tape pipelining

•SoTCP enhancements

•LSAN tagging

HP StorageWorks Fabric OS 6.2.0g release notes 3

•Support for Pathinfo over MetaSAN

•Use FSPF cost in the FCR backbone fabric to find the shortest path to the edge fabric

•In-band management link over FCIP connections for HP StorageWorks 400 Multi-protocol

Router

•TCP byte streaming for FCIP connections with WAN optimization hardware

•Improved FCIP statistics support, including TCP connection history, high watermark information,

and connection snapshot capability

•Support of temporary licenses for Adaptive Networking, Integrated Routing, and Fabric Watch

NOTE:

Temporary licenses are not currently supported by HP.

•Security enhancements

•IPv6 auto-configuration

•IPsec with IPv6 (for management port)

•Configurable switch-wide policy requiring authentication of all HBAs

•RADIUS enhancements allowing password expiration and source IP address information

•LPAD enhancement allowing for an alternate domain userPrincipalName (UPN)

•IPv6 certified for JITC Approved Product List

•FICON enhancements

•RNID support for CUP

•New FC addressing modes for support with virtual fabrics

•Support for HP StorageWorks SAN Director 48 Port 8Gb FC Blade with VF-enabled HP Stor-

ageWorks DC SAN Backbone Director and DC04 SAN Director for FICON environments

•Access Gateway enhancements

•AG mode support on HP StorageWorks 8/40 SAN Switch.

•Miscellaneous

•FC ping support between switches (ping switch WWN)

•Provision of path information via CLI

•Frame redirection support in interopmode 3 (McDATA Open Fabric Mode)

•Support for M-EOSn's 239 Domain ID mode via FCR in interopmode 3

•System-wide RASLog

•Port auto-disable support

•Ethernet port bonding for management ports

•New CLI command to configure F_Port receive buffer credits

•New CLI command to configure portcfgfillword for ARB(FF) implementation (Fabric OS

6.2.0d and later)

New feature descriptions

This section describes the new features that were introduced in Fabric OS 6.2.0a, and brought forward

with Fabric OS 6.2.0g.

Virtual fabrics

•Virtual Fabrics (VF) is a new capability supported on the HP StorageWorks DC SAN Backbone

Director, DC04 SAN Director, HP StorageWorks 8/80 SAN Switch, and HP StorageWorks 8/40

SAN Switch. Once enabled, VF allows the user to divide a single physical chassis or switch into

multiple logical switches by assigning individual ports to a logical switch. Each logical switch is

managed as a completely independent layer 2 Fibre Channel switch, and can be deployed in

independent fabrics known as logical fabrics.

•VF also allows the user to create a special logical switch known as the base switch, which is used

for connectivity to other base switches and also as a backbone fabric for Fibre Channel Routing.

Individual logical fabrics can utilize this shared base fabric for connectivity to other switches,

providing efficient use of resources by sharing common ISL and ICL connections among multiple

logical fabrics.

•VF is part of the base Fabric OS and does not require a license. VF is fully compatible with legacy

Brocade products as well as M-series switches and directors.

FCR and FCIP enhancements

•FCIP (SCSI) Read Tape Pipelining anticipates host read operations and buffers data to reduce

latency from the FCIP WAN.

•LSAN Tagging provides special behavior for designated LSAN zones using either a new speed

tag or enforce tag. The enforce tag allows individual FCRs to be configured only to import devices

in specific LSAN zones, increasing scalability. The speed tag allows designated targets to remain

imported, allowing sensitive hosts to discover targets much faster. This is useful when performing

boot over LSAN operations

•SoTCP Enhancements improve network congestion management in Slow Start Mode and helps

prevent host I/O timeouts.

•Support for Pathinfo over MetaSAN. The Pathinfo command has been enhanced to provide

path information across routed fabrics, which is especially useful when troubleshooting connectivity

problems across routed fabrics.

•FSPF cost in the FCR backbone fabric uses the most efficient route to reach a destination fabric,

preventing the use of an FCIP link when an ISL is available.

•In-band management link over FCIP connections for the 400 MP Router allows a management

station to communicate with a remote 400 MP Router through the GE ports. This allows a single

management station located on the WAN side of the 400 MP Router to communicate with the

management interface on the CP for management tasks such as firmware downloads, SNMP

polling, SNMP traps, trouble shooting, and configuration.

Enhanced Native Connectivity with McDATA products

•Fabric OS 6.2 and M-EOS 9.9 now support Frame Redirection in McDATA Open Fabric Mode

(interopmode 3) fabrics. Frame Redirection zones must be created and activated from Fabric OS

platforms.

•Fabric OS platforms now support EX_Port connections to McDATA Open Fabric Mode Mi10Ks

using the 239 DID setting.

Security enhancements

•Configurable stateless IPv6 auto-configuration is supported.

HP StorageWorks Fabric OS 6.2.0g release notes 5

•IPsec with IPv6 support provides greater security for management ports and configurable security

policies for IPv4/6 addresses.

•A switch-wide policy requiring HBA authentication requires that the FC-SP bit be set in FLOGI. If

the bit is not set, the FLOGI is rejected and the port is disabled.

•A new warning for RADIUS login allows users to specify how many days in advance they should

be notified of password expiration.

•An LDAP enhancement adds the ability to provide an alternate UPN (userPrincipalName) to domain

authentication.

Contact your switch vendor for information about other backup applications.

Optionally licensed software

The following are optionally licensed features in Fabric OS 6.2:

•Ports on Demand allows customers to instantly scale the fabric by provisioning additional ports

via a license key upgrade (applies to select switch models).

•Extended Fabrics provides greater than 10 km of switched fabric connectivity at full bandwidth

over long distances (depending on platform, the distance can be up to 3000 km).

•ISL Trunking provides the ability to aggregate multiple physical links into one logical link for en-

hanced network performance and fault tolerance. This also includes Access Gateway ISL Trunking

on the products that support Access Gateway deployment.

•Advanced Performance Monitoring enables performance monitoring of networked storage resources.

This license includes the TopTalkers feature.

•High-Performance Extension over FCIP/FC (formerly known as FC-IP Services) for the HP Storage-

Works B-series Multi-protocol Router blade and 400 MP Router). This license key also includes the

FC-Fast Write feature and IPsec capabilities.

•The accelerator for FICON license enables unique FICON emulation support for IBM’s Global

Mirror (formerly XRC) application (including Hitachi Data Systems HXRC and EMC’s XRC) as well

as tape pipelining for all FICON tape and virtual tape systems to significantly improve XRC and

tape backup/recovery performance over virtually unlimited distance for the 400 MP Router and

B-series Multi-protocol Router blade.

•Fabric Watch monitors mission-critical switch operations, and now includes new Port Fencing

capabilities.

•The FICON Management Server (also known as CUP or Control Unit Port) enables host-control of

switches in mainframe environments.

•Inter Chassis Links (ICLs) provide dedicated high-bandwidth links between two HP StorageWorks

DC SAN Backbone Directors or DC04 SAN Director switch chassis, without consuming valuable

front-end 8G ports. Each DC Backbone Director/DC04 SAN Director must have the ICL license

installed in order to enable the ICL connections (available on the DC Backbone Director/DC04

SAN Director only).

•Adaptive Networking allows a user to ensure high priority connections and obtain the network

resources necessary for optimum performance, even in congested environments. The QoS SID/DID

Prioritization and Ingress Rate Limiting features are the first components of this license, and are

available on all 8G platforms.

•The Integrated Routing license allows ports in an HP StorageWorks DC SAN Backbone Director,

HP StorageWorks DC04 SAN Director, HP StorageWorks 8/80 SAN Switch, or HP StorageWorks

8/40 SAN Switch to be configured as EX_Ports, supporting Fibre Channel Routing. This eliminates

the need to add a B-series Multi-protocol Router blade or use the 400 MP Router for FCR purposes,

and also provides double the bandwidth for each FCR connection (when connected to another

8G-capable port).

•The Server Application Optimization license (introduced with Fabric OS 6.2) when deployed with

server adapters, optimizes overall application performance for physical servers and virtual machines

by extending virtual channels to the server infrastructure. Application specific traffic flows can be

configured, prioritized, and optimized throughout the data center infrastructure.

Included licensed software

The Enhanced Group Management license is included with all HP 8Gb switches. Enhanced Group

Management enables full management of the device in a datacenter fabric with deeper element

management functionality and greater management task aggregation throughout the environment.

This license is used in conjunction with Data Center Fabric Manager (DCFM) application software.

Temporary license support

Temporary licenses are not currently supported by HP.

Previously licensed software now part of base Fabric OS

The following capabilities are included as part of the base Fabric OS and no additional purchase or

licensing is necessary.

NOTE:

Advanced Zoning and Web Tools licenses are no longer necessary, beginning with Fabric OS 6.1.

These features are automatically enabled on all products running Fabric OS 6.1 or later

Standards compliance

This software conforms to the Fibre Channel standards and to accepted engineering practices and

procedures. In certain cases, HP might add proprietary supplemental functions to those specified in

the standards. For a list of standards conformance, see the HP Web site: http://www.hp.com.

Update recommendations

NOTE:

With the introduction of Fabric OS 6.1.1, certain features and functions were removed from Web

Tools (resident in the firmware) and migrated to the Data Center Fabric Manager (DCFM) management

application. HP recommends that, before you upgrade to Fabric OS 6.1.1x or later, if DCFM is not

running on your fabric, you review the Web Tools functionality moved to DCFM, page 30 in these

release notes and take note of what has changed so you can assess the impact on your fabric.

All products supported by Fabric OS 6.0.x can be upgraded to Fabric OS 6.2.0g. If applicable, HP

recommends that you upgrade to Fabric OS 6.2.0g as soon as possible to take advantage of the

latest fixes and features.

See Firmware upgrades and downgrades for more information.

HP StorageWorks Fabric OS 6.2.0g release notes 7

Supersedes

Fabric OS 6.2.0e, released May 2009

New hardware support

Support for the HP StorageWorks DC04 SAN Director was introduced with Fabric OS 6.2.0a. The

DC04 SAN Director:

•Has 192 ports, 8 Gb/sec technology in an 8U chassis with horizontal slots (9U with standard

port side air flow kit)

•Supports HP StorageWorks SAN Director 16 Port 8Gb FC blade, SAN Director 32 Port 8Gb FC

blade, and SAN Director 48 Port 8Gb FC blade

•Supports all special purpose blades available for the HP StorageWorks DC SAN Backbone Dir-

ector

•Supports ICL connectivity to other HP StorageWorks DC04 SAN Director or DC SAN Backbone

Director chassis

Fabric OS 6.2.0b introduced support for the HP StorageWorks Encryption SAN Switch and the DC

Switch Encryption FC Blade. The encryption switch provides:

•48 Gb/s of encryption processing power, upgradable to 96 Gb/s

•Industry standard AES-256 algorithms for data-at-rest encryption

•32 Fibre Channel ports, 8 Gb/s in 2U form factor

•Integration with HP StorageWorks Secure Key Manager (SKM)

The encryption blade provides 16 ports and is supported in the DC SAN Backbone Director and

DC04 SAN Director.

NOTE:

The encryption switch and encryption blade are unique products compared to standard Fibre Channel

switches. HP highly recommends that you read the

Fabric OS Encryption Administrator's Guide

before

configuring these products in any fabric.

Supported product models

The following product models can be upgraded to Fabric OS 6.2.0g:

•HP StorageWorks 4/8 SAN Switch and 4/16 SAN Switch (Brocade 200E)

•HP StorageWorks 4/32 SAN Switch (Brocade 4100)

•HP StorageWorks 4/32B SAN Switch (Brocade 5000)

•HP StorageWorks 4/48 SAN Director Blade (FC4–48)

•HP StorageWorks 4/64 SAN Switch (Brocade 4900)

•HP StorageWorks 4/256 SAN Director (Brocade 48000)

•HP StorageWorks 16 Port 4–Gb Blade (FC4–16)

•HP StorageWorks 32 Port 4–Gb Blade (FC4–32)

•B-series MP Router Blade (Brocade FR4–18i)

•HP StorageWorks B-series iSCSI Director Blade (Brocade FC4-16IP) compatible with the 4/256

SAN Director model only, not supported in the DC SAN Backbone Director or DC04 SAN Director

•HP StorageWorks 8/8 and 8/24 SAN Switches (Brocade 300)

•HP StorageWorks 8/40 SAN Switch (Brocade 5100)

•HP StorageWorks 8/80 SAN Switch (Brocade 5300)

•HP StorageWorks 400 Multi-protocol Router (Brocade 7500)

•HP StorageWorks Encryption SAN Switch (Brocade BES)

•HP StorageWorks DC04 SAN Director (Brocade DCX4–S)

•HP StorageWorks DC SAN Backbone Director (Brocade DC Director Data Center Backbone)

•HP StorageWorks SAN Director 16 Port 8–Gb FC blade (Brocade FC8–16)

•HP StorageWorks SAN Director 32 Port 8–Gb FC blade (Brocade FC8–32)

•HP StorageWorks SAN Director 48 Port 8–Gb FC blade (Brocade FC8–48)

•HP StorageWorks SAN Director 6 Port 10–Gb FC ISL blade (Brocade FC10–6)

•HP StorageWorks DC Switch Encryption FC Blade (Brocade FS8–18)

•HP StorageWorks EVA4400 embedded switch module (Brocade 5410)

•Brocade 4–Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)

•Brocade 4–Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)

•Brocade 8–Gb SAN Switch for HP BladeSystem c-Class (Brocade 5480)

Unsupported product models

The following product models cannot be upgraded to Fabric OS 6.2.0g:

•HP StorageWorks MSA SAN Switch 2/8, which operates with Fabric OS 3.2.x (Brocade 3000)

•HP StorageWorks SAN Switch 2/8V (Brocade 3250)

•HP StorageWorks SAN Switch 2/16V (Brocade 3850)

•HP StorageWorks SAN Switch 2/16, which operates with Fabric OS 3.2.x (Brocade 3800)

•HP StorageWorks SAN Switch 2/32 (Brocade 3900)

•HP StorageWorks Core Switch 2/64, which operates with Fabric OS 5.0.x (Brocade 12000)

•HP StorageWorks SAN Director 2/128 (Brocade 24000)

•HP StorageWorks Multi-protocol (MP) Router, which operates with XPath OS 7.4.x (Brocade

AP7420)

IMPORTANT:

Any enhancements for these models will be delivered in Fabric OS 3.2.x, Fabric OS 5.x, and XPath

OS 7.4.x sustaining releases.

Devices supported

For a list of supported devices, see the HP website:

http://www.hp.com/go/san

HP StorageWorks Fabric OS 6.2.0g release notes 9

Operating systems

For a list of operating systems, see the HP website:

http://www.hp.com/go/san

Access Gateway support

Access Gateway is supported with the following HP products only:

•Brocade 4-Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)

•Brocade 4-Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)

•HP StorageWorks 4/16 SAN Switch (Brocade 200E)

•HP StorageWorks 8/8 SAN Switch (Brocade 300)

•HP StorageWorks 8/24 SAN Switch (Brocade 300)

•HP StorageWorks 8/40 SAN Switch (Brocade 5100)

IMPORTANT:

Although the HP StorageWorks 4/8 SAN Switch uses the same hardware as the 4/16 SAN Switch,

it does not support Access Gateway. The same applies to the HP StorageWorks 8/8 and 8/24 SAN

Switches. Both use the same hardware, but only the 8/24, which has all ports licensed, has Access

Gateway support. Also, Access Gateway mode is not supported with the Brocade 4-Gb SAN Switch

for HP p-Class BladeSystem (Brocade 4012) if any half-height BladeServers (BL3xp) are configured

in the same sleeve in the p-Class enclosure. For the latest updates, see the HP website:

http://www.hp.com

Access Gateway connectivity is supported by the switches listed in Access Gateway support and also

by the following B-series switches:

•HP StorageWorks SAN Switch 4/32

•HP StorageWorks SAN Switch 4/32B

•HP StorageWorks SAN Switch 4/64

•HP StorageWorks SAN Director 4/256

•HP StorageWorks SAN Switch 8/80

•HP StorageWorks DC SAN Backbone Director

•HP StorageWorks DC04 SAN Director

•HP StorageWorks 400 Multi-Protocol Router

•HP StorageWorks EVA4400 Embedded Switch Module

Access Gateway was introduced with Fabric OS 5.2.1b. It allows a switch to operate in agmode ,

which allows simplified connectivity between large numbers of servers and the SAN. Access Gateway

leverages N_Port ID Virtualization (NPIV) to hide the complexity of the servers (both physical and

virtual) attached to it, while allowing easy SAN connectivity. The edge fabric switch provides all fabric

services, while Access Gateway connects to the edge switch by what appears as a host bus adapter

(HBA) connection. This architecture allows the deployment of many additional servers without requiring

a domain and the associated fabric rebuild traffic. Rebuild traffic is prevalent when switches are

powered on, added, or removed from a fabric.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de HP

HP 742n - Pavilion - 512 MB RAM Instrucciones de instalación y funcionamiento

HP Guardian Manual de usuario

HP Vectra VL800 Manual de usuario

HP Spooler FASTP Manual de usuario

HP Brocade 8/24c Manual de instrucciones

HP BL680c - ProLiant - G5 Manual de referencia

HP Designjet T1300 Manual de usuario

HP StorageWorks 2000fc Manual de usuario

HP Workstation zx6000 Cómo utilizar

HP NonStop SQL/MX Manual de usuario

HP StorageWorks SN6000 Manual de usuario

HP b2600 Manual de instrucciones

HP Integrity rx1600 Guía de referencia rápida

HP LeftHand P4000 - SAN Solutions Manual de instrucciones

HP 455031-L22 - Intel Quad-Core Xeon 2.13 GHz Processor... Manual de usuario

HP t5630 - Thin Client Instrucciones de instalación y funcionamiento

HP BB118BV - StorageWorks Data Protector Express... Instrucciones de instalación y funcionamiento

HP D6030A - NetServer - E50 Manual de usuario

HP C7791C - DesignJet 130 Color Inkjet Printer Guía de configuración

HP Compaq NC4000 Manual del propietario

HP StorageWorks XP10000 - Disk Array Manual de instrucciones

HP Integrity BL860c Manual de instrucciones

HP D6030A - NetServer - E50 Manual de usuario

HP ProLiant ML310 Generation 5p Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario

Novell

Novell SP2 - S Manual de instrucciones