HP Deskjet 812c Manual de instrucciones

HP StorageWorks B-series Data Center

Fabric Manager Enterprise

V10.1.4 release notes

Part number: 5697-0085

First edition: July 2009

Legal and notice information

Version

10.1.4

Effective date

July 2009

Description

HP StorageWorks B-series Data Center Fabric Manager (DCFM) is HP's next-generation fabric

management application and the successor to its legacy fabric management application, HP

StorageWorks Fabric Manager (FM).

DCFM 10.1.0 integrated the following features:

•HP StorageWorks DC04 SAN Director added as a new hardware platform

•New software features:

• Virtual Fabrics

• Port Fencing support for B-series hardware

•Enhancements to existing features:

• Performance Management:

• Top Talkers support

• Additional FCIP statistics

• FICON Management:

• Enhancements to PDCM to support Port Groups

• Cascaded FICON Merge Wizard (various options to resolve failures)

• Request Node Identification (RNID) support for M-series hardware

•Pathinfo support for Fibre Channel Routing (FCR) links

• Zoning enhancements, such as removing or replacing offline devices, and TI zone support for

Virtual Fabrics

• Technical Support Data and Firmware Download with support for SCP

DCFM 10.1.2 added support for the B-series Encryption SAN Switch and B-series Encryption Blade.

DCFM 10.1.4 adds support for the following:

•Call Home for HP StorageWorks 2408 FCoE Converged Network Switches

•SNMP traps for HP StorageWorks 2408 FCoE Converged Network Switches

Update recommendation HP recommends that you upgrade to DCFM 10.1.4 to benefit from the

fixes included in this release.

HP StorageWorks B-series Data Center Fabric Manager Enterprise 3

IMPORTANT:

DCFM 10.1.2 or later is required in order to manage the B-series Encryption products with DCFM.

Existing EFCM and FM customers with valid licenses and maintenance contracts that have not already

migrated to DCFM are encouraged to do so. The migration path is from EFCM 9.6.

or 9.7.

direct

to DCFM 10.1.4, or from FM 5.4.

or 5.5.

direct to DCFM 10.1.4.

NOTE:

New B-series switches introduced by HP will be supported in DCFM only (no support will be provided

in EFCM or FM).

Supported switches and firmware

Table 1 lists versions of firmware and associated switches supported by this DCFM release. This does

not imply that all firmware versions listed in the left column are still supported by HP, but rather that

those are the firmware streams on which the corresponding switches are, or were, supported. It also

does not imply that all the listed firmware streams are supported on each of the corresponding switches.

HP recommends using the latest software versions to get the greatest benefit from the SAN.

Table 1 Supported switches and firmware

Switch/DirectorSwitch firmware

HP StorageWorks SAN Switch 2/32 (Brocade 3900)

HP StorageWorks SAN Switch 2/8V (Brocade 3250)

HP StorageWorks SAN Switch 2/16V (Brocade 3850

HP StorageWorks SAN Switch 4/32 (Brocade 4100)

HP StorageWorks 400 Multi-Protocol Router (Brocade 7500)1

HP StorageWorks 4/8, 4/16 SAN Switch (Brocade 200E)

HP StorageWorks SAN Switch 4/64 (Brocade 4900)2

HP StorageWorks SAN Switch 4/32B (Brocade 5000)3

HP StorageWorks 8/8, 8/24 SAN Switch (Brocade 300)4

HP StorageWorks 8/40 SAN Switch (Brocade 5100)4

HP StorageWorks 8/80 SAN Switch (Brocade 5300)4

HP StorageWorks Core Switch 2/64 (Brocade 12000)

HP StorageWorks SAN Director 2/128 (Brocade 24000)

HP StorageWorks 4/256 SAN Director (Brocade 48000)

•HP StorageWorks 4/256 SAN Director 16 Port 4Gb Blade (FC4-16)

•HP StorageWorks 4/256 SAN Director 32 Port 4Gb Blade (FC4-32)

•HP StorageWorks 4/256 SAN Director 48 Port 4Gb Blade (FC4-48)2

•HP StorageWorks iSCSI Director Blade (FC4-16IP)2

•HP StorageWorks Multi-Protocol Router Blade (FR4-18i)1

•HP StorageWorks SAN Director 6 Port 10Gb FC ISL Blade (FC10-6)5

HP StorageWorks DC SAN Backbone Director (Brocade DCX)6

•HP StorageWorks DC SAN Director 16 Port 8Gb FC Blade (FC8-16)

•HP StorageWorks DC SAN Director 32 Port 8Gb FC Blade (FC8-32)

•HP StorageWorks DC SAN Director 48 Port 8Gb FC Blade (FC8-48)

•HP StorageWorks Multi-Protocol Router Blade (FR4-18i)

•HP StorageWorks DC SAN Director 6 Port 10Gb FC ISL Blade (FC10-6)

•HP DC Switch Encryption FC Blade

HP StorageWorks Encryption SAN Switch

HP StorageWorks DC04 SAN Director (Brocade DCX-4S) 7

•HP StorageWorks DC SAN Director 16 Port 8Gb FC Blade (FC8-16)

•HP StorageWorks DC SAN Director 32 Port 8Gb FC Blade (FC8-32)

•HP StorageWorks DC SAN Director 48 Port 8Gb FC Blade (FC8-48)

•HP StorageWorks Multi-Protocol Router Blade (FR4-18i)

•HP StorageWorks DC SAN Director 6 Port 10Gb FC ISL Blade (FC10-6)

•HP DC Switch Encryption FC Blade

HP StorageWorks 2408 FCoE Converged Network Switch8

FOS 5.0.x, 5.1.x, 5.2.x, 5.3.x,

6.0.x, 6.1.x, and 6.2.x

Brocade 4Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)9

Brocade 4Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)

HP StorageWorks EVA4400 Embedded Switch Module (Brocade 5410)10

Brocade 8Gb SAN Switch for HP BladeSystem c-Class (Brocade 5480)11

FOS 5.2.x, 5.3.x, 6.0.x, 6.1.x,

and 6.2.x

HP StorageWorks B-series Data Center Fabric Manager Enterprise 5

Switch/DirectorSwitch firmware

HP StorageWorks Director 2/64, 2/140 (Brocade M6064 and M6140)

HP StorageWorks Edge Switch 2/16 (Sphereon 3216)

HP StorageWorks Edge Switch 2/32 (Sphereon 3232)

HP StorageWorks Edge Switch 2/12 (Sphereon 4300)

Sphereon 4400 (Brocade 4400)

Sphereon 4700 (Brocade 4700)

M-EOSc 9.6.x, 9.7.x, 9.8x,

and 9.9

Intrepid 10000 Director (Brocade Mi10K)M-EOSn 9.6.x, 9.7.x, 9.8.x,

and 9.9

1Requires FOS V5.1.0 or later

2Requires FOS V5.2.0 or later

3Requires FOS V5.2.1b or later

4Requires FOS V6.1.0a or later

5Requires FOS V5.3.0 or later

6Requires FOS V6.0.0b or later

7Requires FOS V6.2.0a or later

8Requires FOS V6.1.2_cee1 or later. Support for this switch in DCFM V10.1.xis for discovery only.

9Requires FOS V5.3.1 or later

10Requires FOS V6.1.0_8e or later

11Requires FOS V6.1.0_8e1 or later

Supported operating systems

DCFM 10.1.xis supported on the operating systems listed in Table 2.

Table 2 Supported operating systems

VersionsOperating system

•XP Professional SP2, SP3, (x86 32-bit)

•2003 Server SP2 (x86 32-bit)

•Vista Business Edition (x86 32-bit)

•2008 Server (x86 32-bit)

Windows

10 (SPARC-platform)Solaris

•Red Hat AS 4.0 (x86 32-bit)

•Red Hat Enterprise Linux 5 Advanced (x86 32-bit)

•SUSE Linux Enterprise Server 10 SP1 (x86 32-bit)

Linux

Important notes

This section lists information that you should consider before you use DCFM V10.1.x. See the Data

Center Fabric Manager Enterprise User Manual for full details on the following notes. This document

can be downloaded from the following HP website:

http://h18006.www1.hp.com/products/storageworks/dc_fabricmgr/index.html

Under Support, click Support for your product, and then click Manuals.

NOTE:

Be sure to install the DCFM application on a dedicated machine that is not running any other server

applications, such as another database server.

Using M-EOSc switches with SNMPv3 enabled

DCFM 10.1.3 or later does not support managing M-EOSc switches with SNMPv3 enabled. If SNMPv3

is enabled on M-EOSc switches, SNMPv1 is automatically disabled. DCFM 10.1.3 or later uses

SNMPv1 to manage M-EOSc switches; therefore, the manageability link cannot be established if

SNMPv3 is enabled. HP recommends that you disable SNMPv3 using the CLI.

Remote Client fails to launch with Web Start Exception

Not running JRE 1.6.0 Update5 can cause a known issue where the remote client fails to launch. This

JRE version is bundled with the DCFM Server. If your system does not already have JRE 1.6.0, when

launching the remote client the browser will have a link to download the JRE installer. If your system

already contains JRE 1.6.0, you must run 1.6.0 Update5. This can be validated by running java

–version from the command prompt. If the version displays as 1.6.0_05, you are running the

correct version. If it is not the correct version, remove the incorrect version and point your web browser

to the DCFM Server IP address to download the correct version.

NOTE:

If you installed JRE 1.6.0 Update5, do not use Java’s auto-updater, as this will change the JRE version.

Incorrect error message displayed when FCIP license is missing

If a switch without a FCIP license is selected when creating a FCIP tunnel, the following error message

is displayed:

The switch does not have any free tunnels.

This error message is displayed instead of:

The switch does not have a FCIP license.

VEX_Port not disabled after FICON parameter values added

VEX_Port is not disabled after you enter FICON parameters in advanced settings in the FCIP

configuration wizard.

User action and product audit events not generated from port fencing actions

When port fencing policies are assigned to M-EOS switches in a mixed fabric, user action and product

audit events are not generated. User action events are not generated when unassigning a policy from

a M-EOS switch.

Incorrect information is listed in Compare or Merge dialog

If multiple zones are defined in a single zone configuration, the Host-to-Storage and Storage-to-Host

information will be listed incorrectly in the Compare/Merge dialog.

HP StorageWorks B-series Data Center Fabric Manager Enterprise 7

DCFM Pro services do not auto-start on Linux and Solaris

After a restart, DCFM Pro services need to be manually started on both Linux and Solaris. Until Pro

services are started, the DCFM client will fail to launch.

FC Address field displays incorrect in the Port Connectivity View

The FC address is listed incorrectly when using the Port Connectivity View. The correct FC address is

available in the Properties dialog.

Duplicate entries in Call Home notification for M-model switches

With Virtual Fabrics enabled, the Call Home notification dialog displays duplicate entries for M-model

switches.

Event priority mismatch

Error-level policies can occasionally be triggered by warning-level events.

Remote Client unable to be launched using web browser on Windows systems

If the administrator password is changed from the client and then the client is re-launched from a web

browser, the client may fail to launch.

Error when opening Zoning dialog with no message

When a user with read-only permissions for Zoning Offline launches the Zoning dialog, an error

message with no text is displayed. Add the Read-Only Zoning Online permission to the user role in

order to not see the error message dialog box.

Configdownload fails for Firmware and ALL parameters

When Configdownload is attempted from one virtual switch to another virtual switch when the

Fabric IDs are not identical and the Firmware and ALL parameters are selected, the download will

fail.

Switch name update delay

When changing the name of a switch from outside of DCFM, the new name for the switch does not

appear within DCFM for up to 15 minutes depending on SAN Size selection.

Incorrect message shown in Master Log for end-to-end monitors

Messages in the Master Log are incorrectly generated when the end-to-end monitors dialog is opened

and closed without modification, or when an end-to-end pair creation fails.

Element manager fails to launch on i10k

If the admin partition (partition 0) is removed and then reattached to a managed fabric, the element

manager no longer launches from DCFM until the DCFM services are restarted.

Tunnel ports shown instead of GigE ports

In the topology view, tunnel ports are shown instead of Gigabit Ethernet ports.

Deleting Logical Switches with GigE ports causes errors

When deleting a Logical Switch that has Gigabit Ethernet ports without first moving the GigE ports

to the default Logical Switch, an error message may be displayed and the delete fails.

Blank graph displayed for FCIP tunnels

When FCIP tunnels are selected from the Picker dialog in the Historical Graph, the tunnels will initially

appear as blank until the Apply button in the dialog is clicked.

Domain port index and port WWNs unavailable in Add Member dialog

The port index and port WWNs are grayed out when using the Add Member dialog. The port index

can still be selected by choosing the appropriate devices in the device tree and then moving them to

the right.

Event-based file actions fail

DCFM event actions fails to run scripts on Windows remote-mounted filesystems.

EX_Port disabled when configuring Routing Domain IDs

After selecting an edge fabric and launching the routing domain IDs dialog, if you select all of the

front domains and Xlate domains and then add appropriate domain IDs, clicking OK disables the

EX_Ports with the following message:

EX_PORT ISOLATE

E_Port information missing in EOS edge switch

When opening a graph of an E_Port to EX_Port connection, the E_Port labels are blank but the data

graphed is corrected.

Access Gateways connected to M-EOS switches not discovered

Access Gateways connected to M-EOS fabrics are not discovered by DCFM. Only Access Gateways

attached to FOS-based switches are currently able to be discovered.

Incorrect title of Top Talkers dialog

When the Top Talkers dialog is selected, the title incorrectly displays as “Realtime Port Selector.”

WWNs not shown in Fabric Binding dialog

After two FOS fabrics in interop mode 0 are merged, the member's WWN is missing and the Fabric

Binding Status is listed as Unknown in the Fabric Binding dialog.

SNMP trap registration

If the discovery status displays the message Not registered for SNMP Trap, manually add

the server IP entry in the SNMP trap registration table from the switch CLI using the following command:

snmpconfig --set snmpv3

HP StorageWorks B-series Data Center Fabric Manager Enterprise 9

FCIP/GigE Performance Graphs

If there are no FCIP/GigE performance graphs shown for a switch, verify that the server IP address

is properly registered in the SNMP trap registration table. To verify the IP address, enter the CLI

command snmpconfig --show snmpv3 and verify that the SNMPv3 credentials exactly match

the SNMPv3 user that the DCFM server is registered with for traps.

Management of M-series/McDATA switches requires a B-series switch

DCFM management accesses the switches through one B-series switch in each fabric. To use DCFM

to manage M-series or McDATA switches, at least one B-series switch must be connected to the fabric.

At this time, only the HP StorageWorks 4/256 SAN Director (Brocade 48000) and HP StorageWorks

DC SAN Backbone Director (Brocade DCX) are supported for interoperability with M-series switches.

For the latest support information, see the HP StorageWorks Fabric interoperability: Merging fabrics

based on M-series and B-series Fibre Channel switches application note at http://spock.corp.hp.com/

Pages.internal/spock2Html.aspx?htmlFile=an_fabric_interoperability.internal.html.

Removing switches

If you plan to segment and remove more than two switches from a fabric and you have historical

performance collection enabled, HP recommends that you accept changes after each switch

segmentation from the client.

DCFM clients

To free up server resources and as best practice, HP recommends that you shut down clients that are

not actively used. In some scenarios, if duplicate entries are displayed in the Product List, restart the

client.

Secure FOS fabrics cannot be discovered from DCFM

DCFM does not support Secure FOS (SFOS). If you attempt to discover an SFOS fabric, DCFM displays

the message Discovery Failed. To recover, you must remove the SFOS settings and set normal

fabric settings.

Performance Data Aging tab has been removed from Server Management

Console

You cannot configure the Performance Data Aging settings in DCFM 10.1.4. The tab has been removed

from Server Management Console (SMC). The default configuration settings are as follows:

•288 samples in a 5-minute period (1 day)

•144 samples in a 30-minute period (3 days)

•84 samples in a 2-hour period (1 week)

•90 samples in a 1-day period (3 months)

•606 total samples

When migrating from an earlier release to DCFM 10.1.4, all historical data will be truncated with

respect to the default samples, and the aging configuration will not be migrated.

SNMPv3 credentials for FOS switches when migrating from EFCM

When migrating from EFCM to DCFM, the SNMPv3 credentials for the FOS switches are incorrectly

assigned to the user ID (Discovery Dialog > IP Address tab > User ID). You must clear the user ID

manually before you can discover and manage the FOS switches.

Otros manuales para Deskjet 812c

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de HP

HP e3000 Manual de usuario

HP StorageWorks All-in-One SB600c - Storage... Manual de usuario

HP CN088A - Serif PosterDesigner Pro Manual de usuario

HP J4813A Manual de usuario

HP ML110 - ProLiant G5 2TB Storage Server NAS Manual de usuario

HP Brio BA200 Manual de usuario

HP Xw460c - ProLiant - Blade Workstation Manual de usuario

HP vc4825T - Thin Client Manual de servicio

HP Integrity Superdome 2 Manual de usuario

HP dc5700 - Microtower PC Manual de usuario

HP Compaq 2210b Manual de usuario

HP Brocade 8/24c Manual de instrucciones

HP T6553 D45 Manual de usuario

HP HP 2605dn Print Drivers Manual de servicio

HP 4X - DDR InfiniBand Mezzanine HCA Guía

HP ProCurve 1600M Manual de usuario

HP Deskjet 812c Manual de instrucciones

HP ProLiant BL420c Manual de usuario

HP AB500A - Integrated Lights-Out Advanced Guía rápida

HP Neoware c50 - Thin Client Manual de usuario

HP T5145 - Thin Client - Tower Manual de usuario

HP ProCurve J8766A Manual de instrucciones

HP mfp digital sending software v. 4 Manual de usuario

HP Rx2620-2 - Integrity - 0 MB RAM Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario

Novell

Novell SP2 - S Manual de instrucciones