HP E2416B Manual de usuario

User’s Guide

Publication Number E2416-97002

June 1998

For Safety Information, Warranties, and Regulatory Information, see the

pages at the end of this manual.

Copyright Hewlett-Packard Company 1993 - 1998

HP E2416B Analysis Probe for

Intel 80196

The HP E2416B Analysis Probe — At a Glance

The HP E2416B Analysis Probe provides a complete interface for

state or timing analysis between any compatible 80196 PLCC target

system and HP logic analyzers. The supported logic analyzers are

listed in chapters 1. A microprocessor is defined as compatible if it

conforms to the 80196 architecture, uses the 80196 instruction set,

and uses the 68-pin PLCC pinout. This includes 8096, 8097, AH

versions, -90 versions, BH versions, and 80C196KA/KB/KC/KD.

The analysis probe provides the physical connection between the

target microprocessor and the logic analyzer. The configuration

software on the enclosed disks set up the logic analyzer for

compatibility with the analysis probe. The inverse assemblers on the

disks let you obtain displays of the 80196 data in 80196 assembly

language mnemonics.

If you are using the analysis probe with the HP 16600 or HP 16700

series logic analysis systems, you only need this manual as a

reference. The HP 16600 and 16700 series contain a Setup Assistant,

which guides you through the connection and configuration process

using on screen dialog windows. For an overview of Setup Assistant,

refer to Chapter 1, "Setup Assistant."

For more information on the logic analyzers or microprocessor, refer

to the appropriate reference manuals for those products.

ii HP E2416B 80196 Analysis Probe

Analyzing a Target System with the HP E2416B Analysis Probe

The HP E2416B AnalysisProbe — Ata Glance

HP E2416B 80196 Analysis Probe iii

In This Book

This book is the User’s Guide for the HP E2416B Analysis Probes. It assumes

that you have a working knowledge of the logic analyzer used and the

microprocessor being analyzed.

This user’s guide is organized into the following chapters:

Chapter 1 contains overview information, including a list of required

equipment.

Chapter 2 explains how to connect the logic analyzer to your target

system through the analysis probe, and how to configure the analysis

probe and logic analyzer to interpret target system activity. The last

section in this chapter shows you how to hook up optional equipment

to obtain additional functionality.

HP 16600 and HP 16700 Series Logic Analysis Systems

If you are using the analysisprobe with HP16600or HP 16700 serieslogic

analysissystems, youonly need this manual as areference for obtaining and

interpretingdata. The HP 16600 and HP 16700 contain a Setup Assistant, which

guides youthroughthe connection and configuration processusing on screen

dialog windows. For an overview of Setup Assistant, refer to chapter 1, "Setup

Assistant."

Chapter 3 provides information on analyzing the supported

microprocessors.

Chapter 4 contains reference information on the analysis probe.

Chapter 5 contains troubleshooting information.

Configuring

Connecting &

Configuring

Your System

Chapter 2

Connecting

the Analysis

Probe to the

Target System

Analyzing the

Target System

Chapter 3

Connecting

Optional

Equipment

Overview

Chapter 1

Reference

Chapter 4

If You Have

a Problem

Chapter 5

Connecting

the Analysis

Probe to the

Logic Analyzer

iv HP E2416B 80196 Analysis Probe

Contents

The HP E2416B Analysis Probe — At a Glance ii

1 Overview

Setup Assistant 1–3

Logic Analyzers Supported 1–4

Logic analyzer software version requirements 1–5

Equipment Used with the Analysis Probe 1–6

Equipment supplied 1–6

Minimum equipment required 1–8

Additional equipment supported 1–8

2 Connecting and Configuring Your System

Power-on/Power-off Sequence 2–4

To power on HP 16600 and HP 16700 series logic analysis systems 2–4

To power on all other logic analyzers 2–4

To power off 2–4

Connecting the Analysis Probe to the Target System 2–5

To connect to a PLCC target system 2–6

Connecting the Analysis Probe to the Logic Analyzer 2–8

Analysis probe pod locations 2–9

To connect to the HP 16600A logic analysis system 2–10

To connect to the HP 16601A logic analysis system 2–11

To connect to the HP 16602A logic analysis system 2–12

To connect to the HP 16603A logic analysis system 2–13

To connect to the HP 16550A logic analyzer 2–14

To connect to the HP 16554/55/56 logic analyzers 2–15

To connect to the HP 1660A/AS/C/CS/CP logic analyzers 2–16

To connect to the HP 1661A/AS/C/CS/CP logic analyzers 2–17

Contents-1

To connect to the HP 1662A/AS/C/CS/CP logic analyzers 2–18

To connect to the HP 1670A/D logic analyzer 2–19

To connect to the HP 1671A/D logic analyzer 2–20

To connect to the HP 1672A/D logic analyzer 2–21

Configuring 2–22

Configuring the Analysis Probe 2–23

Configuring the Logic Analysis System 2–24

To load configuration and inverse assembler files — HP 16600/700 logic analy-

sis systems 2–25

To load configuration and inverse assembler files — other logic analyzers 2–

Connecting Optional Equipment 2–28

3 Analyzing the Target System

Analyzing the Target System 3–2

Modes of Operation 3–3

State-per-transfer mode 3–3

State-per-clock mode 3–3

Timing mode 3–3

Logic Analyzer Configuration 3–4

Trigger specification 3–4

Format specification display 3–4

Logic Analyzer Symbols 3–6

Modifying the trigger menu 3–8

Contents

Contents-2

Using the Inverse Assemblers 3–9

To display captured state data 3–10

To align the inverse assembler 3–11

Inverse assembler output format 3–12

Inverse assembler error messages 3–12

4 Reference

Operating characteristics of the analysis probe 4–3

Theory of operation and clocking 4–5

State-per-transfer mode 4–5

State-per-clock mode 4–5

Timing mode 4–6

Signal-to-connector mapping 4–8

Circuit board dimensions 4–13

Replaceable parts 4–14

5 If You Have a Problem

Analyzer Problems 5–3

Intermittent data errors 5–3

Unwanted triggers 5–3

No activity on activity indicators 5–4

No trace list display 5–4

Analyzer won’t power up 5–4

Analysis Probe Problems 5–5

Target system will not boot up 5–5

Erratic trace measurements 5–6

Capacitive loading 5–6

Inverse Assembler Problems 5–7

No inverse assembly or incorrect inverse assembly 5–7

Inverse assembler will not load or run 5–8

Intermodule Measurement Problems 5–9

Contents

Contents-3

An event wasn’t captured by one of the modules 5–9

Analyzer Messages 5–10

“. . . Enhanced Inverse Assembler Not Found” 5–10

“. . . Inverse Assembler Not Found” 5–10

“. . . Does Not Appear to be an Inverse Assembler File” 5–10

“Measurement Initialization Error” 5–11

“No Configuration File Loaded” 5–14

“Selected File is Incompatible” 5–14

“Slow or Missing Clock” 5–14

“Time from Arm Greater Than 41.93 ms” 5–15

“Waiting for Trigger” 5–15

Cleaning the Instrument 5–16

Glossary

Index

Contents

Contents-4

Overview

This chapter describes:

•Setup Assistant

•Logic analyzers supported

•Logic analyzer software version requirements

•Equipment used with the analysis probe

•Equipment supplied

•Minimum equipment required

•Additional equipment supported

Configuring

Connecting &

Configuring

Your System

Chapter 2

Connecting

the Analysis

Probe to the

Target System

Analyzing the

Target System

Chapter 3

Connecting

Optional

Equipment

Overview

Chapter 1

Reference

Chapter 4

If You Have

a Problem

Chapter 5

Connecting

the Analysis

Probe to the

Logic Analyzer

1-2 HP E2416B 80196 Analysis Probe

Tabla de contenidos

Otros manuales de Hardware de computadora de HP

HP 64767 Manual de usuario

HP ML570 - ProLiant - G2 Manual de usuario

HP Smart Array P400 Instrucciones de uso

HP HP27110B Manual de instalación y funcionamiento

HP M8201R Manual de usuario

HP MPIO Manual de instalación y funcionamiento

HP E5000 Manual de usuario

HP D7171A - NetServer - LPr Manual de usuario

HP AB479A Manual de usuario

HP rp7420 Manual de usuario

HP OmniBook 3100 Manual de usuario

HP 64746 Manual de usuario

HP 64782 Manual de usuario

HP 624189-B21 Manual de usuario

HP t730 Thin Client Manual de usuario

HP 8168E Manual de usuario

HP 381513-B21 - Smart Array P800 Controller... Manual de usuario

HP AF079A Guía de instalación

HP Rp5700 - Point of Sale System Instrucciones de instalación

HP 405132-B21 Manual de usuario

HP Xw4600 - Workstation - 2 GB RAM Manual de usuario

HP CB001A Manual de usuario

HP StoreOnce 2700 Manual del operador

HP StorageWorks FC1142SR Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario