Honeywell 4820HDHM Manual de usuario
™
2020/4820/4820i
2D Cordless Imaging System
User’s Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in speci-
fications and other information contained in this document without prior notice,
and the reader should in all cases consult HII to determine whether any such
changes have been made. The information in this publication does not repre-
sent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the furnish-
ing, performance, or use of this material.
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this document may be photocopied, repro-
duced, or translated into another language without the prior written consent of
HII.
©2005-2009 Honeywell International Inc. All rights reserved.
Other product names or marks mentioned in this document may be trademarks
or registered trademarks of other companies and are the property of their
respective owners.
Web Address: www.honeywell.com/aidc
Hand Held Products/Dolphin/Metrologic products have no affiliation with Honey-
well branded batteries/chargers, which are exclusively distributed by Global
Technology Systems pursuant to a license agreement.
Microsoft® Pocket PC 2002, Windows®, Windows NT®, Windows 2000, Win-
dows ME, Windows XP, ActiveSync®, Outlook®, and the Windows logo are
trademarks or registered trademarks of Microsoft Corporation.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc.
Other product names or marks mentioned in this document may be trademarks
or registered trademarks of other companies and are the property of their
respective owners.
Product Agency Compliance
USA
FCC Part 15 Subpart C
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
Caution: Any changes or modifications made to this equipment not
expressly approved by Honeywell may void the FCC
authorization to operate this equipment.
UL Statement
UL listed: UL60950-1.
Canada
Industry Canada
This device complies with Canadian RSS-210. Operation is subject to the
following conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation.
Conformité à la règlementation canadienne
Cet appareil ISM est conforme à la norme CNR-210 du Canada. Son
fonctionnement est assujetti aux conditions suivantes :
1. Cet appareil ne doit pas causer de brouillage préjudiciable.
2. Cet appareil doit pouvoir accepter tout brouillage reçu, y compris le
brouillage pouvant causer un fonctionnement indésirable.
cUL Statement
cUL listed: CSA C22.2 No.60950-1-03 for I.T.E product safety.
Europe
The CE mark on the product indicates that this device is in
conformity with all essential requirements of the 1999/5/EC R&TTE
Directive. In addition, complies to 2006/95/EC Low Voltage
Directive, when shipped with recommended power supply. For
further information please contact:
Honeywell Imaging & Mobility Europe BV
International Inc.
Nijverheidsweg 9-13
5627 BT Eindhoven
The Netherlands
Honeywell shall not be liable for use of our product with equipment (i.e.,
power supplies, personal computers, etc.) that is not CE marked and does
not comply with the Low Voltage Directive. This equipment is intended for
use throughout the European Community and has been assessed to the
following standards:
EN 300 328
EN 301 489-1
EN 301 489-17
EN60950-1
EN60825-1
Waste Electrical and Electronic Equipment
Information
Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic
equipment (WEEE).
This product has required the extraction and use of natural resources for its
production. It may contain hazardous substances that could impact health
and the environment, if not properly disposed.
In order to avoid the dissemination of those substances in our environment
and to diminish the pressure on the natural resources, we encourage you to
use the appropriate take-back systems for product disposal. Those systems
will reuse or recycle most of the materials of the product you are disposing in
a sound way.
The crossed out wheeled bin symbol informs you that the product
should not be disposed of along with municipal waste and invites you to use
the appropriate separate take-back systems for product disposal.
If you need more information on the collection, reuse, and recycling systems,
please contact your local or regional waste administration.
You may also contact your supplier for more information on the
environmental performances of this product.
Germany
If your product is marked with the GS symbol, then the product has
been issued a GS certificate showing compliance to IEC 60950-1
and IEC 60825-1.
Australia/NZ
C-Tick Statement
Conforms to AS/NZS 3548 EMC requirements.
Japan (4820i, 2020-5B)
Complies with Technical Regulations Conformity Certification of Specified
Radio equipment.
Mexico
Safety approval conforms to NOM-019.
Comision Federal de Telecomunicaciones (radio aprobación)
International
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. The battery should be disposed of by a
qualified recycler or hazardous materials handler. Do not incinerate
the battery or dispose of the battery with general waste materials.
Eye Safety Statement
LED
This device has been tested in accordance with IEC60825-1 LED safety, and
has been certified to be a Class 1 LED device.
Laser Eye Safety Statement
If the following label is attached to your product, it indicates the product
contains a laser engine or laser aimer:
This device has been tested in accordance with and complies with
IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11, except for
deviations pursuant to Laser Notice No. 50, dated July 26, 2001.
LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT,
1.0 mW MAX OUTPUT: 650nM.
Caution: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Radio Technology
Class II
CB Scheme
Certified to CB Scheme IEC 60950-1.
!
LASER LIGHT. DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
1.0 mW MAX OUTPUT:650nM
IEC60825-1: 1993+A1+A2
Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No.50, dated July 26, 2001.
Solids and Water Protection
The 4820 has a rating of IP41, immunity of foreign particles and dripping
water.
The 4820i has a rating of IP54, immunity of foreign particles and sprayed
water.
Patents
Please refer to product packaging for patent information.
Required Safety Labels
Scanner
Compliance
Label locations
Item Number,
Serial Number
and Revision
Information
location
Base
Compliance
Label
locations
Item Number,
Serial
Number and
Revision
Information
location
Otros manuales para 4820HDHM
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Lector de código de barras de Honeywell
Honeywell
Honeywell MS9500 Voyager Series Manual de usuario
Honeywell
Honeywell Solaris MS7820 Manual de usuario
Honeywell
Honeywell 3800 Linear Series Manual de usuario
Honeywell
Honeywell BTRS-QS Manual de usuario
Honeywell
Honeywell Granit XP 199 i Series Manual de usuario
Honeywell
Honeywell VOYAGER 1202G BF Manual de usuario
Honeywell
Honeywell 3800i Manual de usuario
Honeywell
Honeywell PX4-6IE-CUTR-IG-1 Manual de usuario
Honeywell
Honeywell Hyperion 1300G Manual de usuario
Honeywell
Honeywell Voyager 9520 Manual de usuario
Honeywell
Honeywell Voyager 1202G Manual de usuario
Honeywell
Honeywell OrbitCG MS7180 Manual de usuario
Honeywell
Honeywell MX7 Tecton Manual de usuario
Honeywell
Honeywell SF61 Manual de usuario
Honeywell
Honeywell XENON 1902G-BF Dimensiones
Honeywell
Honeywell Captuvo SL22 Manual de usuario
Honeywell
Honeywell 8650 Manual de usuario
Honeywell
Honeywell MK3780-71A38 Manual de usuario
Honeywell
Honeywell XENON 1902G-BF Manual de usuario
Honeywell
Honeywell VOYAGER 1250G Manual de usuario
