HBM C15 Manual de usuario

Operating Manual | Bedienungsanleitung |

Manuel d'emploi | Istruzioni per l'uso | 

English Deutsch Français Italiano 

C15

Hottinger Baldwin Messtechnik GmbH

Im Tiefen See 45

D-64293 Darmstadt

Tel. +49 6151 803-0

Fax +49 6151 803-9100

[email protected]

www.hbm.com

Mat.: 7-0111.0001

DVS: A05091_01_YCI_02 HBM: public

10.2019

EHottinger Baldwin Messtechnik GmbH.

Subject to modifications.

All product descriptions are for general information only.

They are not to be understood as a guarantee of quality or

durability.

Änderungen vorbehalten.

Alle Angaben beschreiben unsere Produkte in allgemeiner

Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits

garantie dar.

Sous réserve de modifications.

Les caractéristiques indiquées ne décrivent nos produits

que sous une forme générale. Elles n'impliquent aucune

garantie de qualité ou de durabilité.

Con riserva di modifica.

Tutti i dati descrivono i nostri prodotti in forma generica e non

implicano alcuna garanzia di qualità o di durata dei prodotti

stessi.

保留变更的权利。

所有信息是对我品的般性描。在性能或者耐性方

它并提保证。

Operating Manual | Bedienungsanleitung |

Manuel d'emploi | Istruzioni per l'uso | 

English Deutsch Français Italiano 

C15

2A05091_01_YCI_02 HBM: public C15

English

1 Safety instructions 4........................................

2 Markings used 8............................................

2.1 The markings used in this document 8..........................

3 Scope of supply and equipment variants 9...................

3.1 Scope of supply 9............................................

3.2 Accessories (not included in the scope of supply) 9...............

3.3 Equipment variants 10.........................................

4 General application instructions 12...........................

5 Structure and mode of operation 13...........................

5.1 Force transducer operation 13..................................

5.2 SG covering agent 13.........................................

6 Conditions on site 14........................................

6.1 Ambient temperature 14.......................................

6.2 Moisture and corrosion protection 14............................

6.3 Deposits 15..................................................

7 Mechanical installation 16....................................

7.1 Important precautions during installation 16......................

7.2 General installation guidelines 17...............................

7.3 Installing the C15 18..........................................

8 Electrical connection 21......................................

8.1 Connection in a 6-wire configuration 22..........................

8.2 Cable shortening or extension 23...............................

8.3 Connection in a 4-wire configuration 23..........................

8.4 EMC protection 23............................................

C15 A05091_01_YCI_02 HBM: public 3

9 TEDS transducer identification 24............................

10 Dimensions 25..............................................

11 Specifications 27............................................

Safety instructions

4A05091_01_YCI_02 HBM: public C15

1 Safety instructions

Intended use

Force transducers in the C15 type series are designed solely for measuring

static and dynamic compressive forces within the load limits stated in the spec

ifications. Any other use is not the intended use.

To ensure safe operation, always comply with the instructions in the installation

and user manual, the following safety rules, and the data in the technical data

sheets. It is also essential to observe the applicable legal and safety regula

tions for the application concerned.

The force transducers are not intended for use as safety components. Please

also refer to the “Additional safety precautions” section. Proper and safe opera

tion of force transducers requires proper transport,correct storage, setup and

installation, and careful operation.

Load-carrying capacity limits

Comply with the information in the technical data sheets when using force

transducers. The respective specified maximum loads in particular must never

be exceeded. The following limits set out in the technical data sheets must not

be exceeded:

SForce limits

SLateral force limits

SMaximum eccentricity of force application

SBreaking forces

SPermissible dynamic loads

STemperature limits

SLimits of electrical load-carrying capacity

Please note that when several force transducers are interconnected, the load/

force distribution is not always uniform, so an individual force transducer may

be overloaded even though the cumulative signal has yet to reach the sum of

the nominal (rated) forces of the sensors connected in parallel.

Safety instructions

C15 A05091_01_YCI_02 HBM: public 5

Use as machine elements

Force transducers can be used as machine elements. When used in this man

ner, it must be noted that, to favor greater sensitivity, the force transducers

were not designed with the safety factors usual in mechanical engineering.

Please refer to the “Load-carrying capacity limits” section and the specifica

tions.

Accident prevention

The prevailing accident prevention regulations must be taken into account,

even though the breaking force is well in excess of the full scale value. This

applies in particular to transportation and mounting.

Additional safety precautions

Force transducers cannot (as passive transducers) implement any (safety-rele

vant) cutoffs. This requires additional components and constructive measures,

for which the installer and operator of the plant is responsible.

In cases where a breakage or malfunction of the force transducer would cause

injury to persons or damage to property,the user must take appropriate addi

tional safety precautions that at least meet the requirements of applicable acci

dent prevention regulations (e.g. automatic emergency shutdown, overload

protection, catch straps or chains, and other fall protection).

The electronic processor that processes the measurement signal should be

designed so that failure of the measurement signal cannot lead to secondary

failures.

General dangers of failing to follow the safety instructions

Force transducers are state-of-the-art and failsafe. Transducers can be dan

gerous if installed, set up, started up or operated incorrectly or by untrained

personnel. Every person involved in setting up, starting up, operating or re

pairing a force transducer must have read and understood the installation man

ual and the technical safety instructions in particular.

Force transducers can be damaged or destroyed if used for other purposes

than their intended use or by non-compliance with the installation and user’s

manual, these safety instructions or other applicable safety regulations (acci

dent prevention regulations from the Employers' Liability Insurance Associa

Safety instructions

6A05091_01_YCI_02 HBM: public C15

tion). Force transducers can break, particularly if overloaded. The breakage of

a force transducer can also cause damage to property or injury to persons in

the vicinity of the force transducer.

If force transducers are not used according to their designated use, or if the

safety instructions or specifications in the mounting and operating instructions

are ignored, it is also possible that the force transducer may fail or malfunction,

with the result that persons or property may be affected (due to the loads act

ing on or being monitored by the force transducer).

The scope of supply and performance of the transducer covers only a small

area of force measurement technology, as measurements with (resistive) strain

gage sensors presuppose the use of electronic signal processing. In addition,

plant planners, equippers and operators are responsible for planning and im

plementing force measurement systems such as to minimize residual risks.

Comply with pertinent national and local regulations.

Conversions and modifications

The design or safety engineering of the transducer must not be modified with

out our express permission. Any modification shall exclude all liability on our

part for any damage resulting therefrom.

Maintenance

C15 force transducers are maintenance-free. However, we recommend having

force transducers calibrated at regular intervals.

Disposal

In accordance with national and local environmental protection, material recov

ery and recycling regulations, old transducers that are no longer serviceable

must be disposed of separately from normal household waste. If you need

more information about disposal, please contact your local authorities or the

dealer from whom you purchased the product.

Safety instructions

C15 A05091_01_YCI_02 HBM: public 7

Qualified personnel

Qualified personnel are persons familiar with the setup, installation, startup,

operation and dismantling of the product and have the necessary qualifications

for this work. This includes people who meet at least one of the three following

requirements:

1. Knowledge of the safety concepts of automation technology is a require

ment and as project personnel, you must be familiar with these concepts.

2. As automation plant operating personnel, you have been instructed how to

handle the machinery. You are familiar with the operation of the equipment

and technologies described in this documentation.

3. As commissioning engineers or service engineers, you have successfully

completed the training to repair the automation systems. You are also au

thorized to operate, ground and label circuits and equipment in accordance

with safety engineering standards.

It is also essential to comply with the legal and safety requirements for the ap

plication concerned during use. The same applies to the use of accessories.

The force transducer may only be installed by qualified personnel, strictly in

accordance with the specifications and with the safety requirements and regu

lations.

Markings used

8A05091_01_YCI_02 HBM: public C15

2 Markings used

2.1 The markings used in this document

Important instructions for your safety are specifically identified. It is essential to

follow these instructions in order to prevent accidents and damage to property.

Symbol Meaning

WARNING This marking warns of a potentially dangerous situa

tion in which failure to comply with safety require

ments may result in death or serious physical injury.

CAUTION This marking warns of a potentially dangerous situa

tion in which failure to comply with safety require

ments may result in slight or moderate physical injury.

Notice This marking draws your attention to a situation in

which failure to comply with safety requirements may

result in damage to property.

Important

This marking draws your attention to important infor

mation about the product or about handling the prod

uct.

Tip

This marking indicates tips for use or other informa

tion that is useful to you.

Information

This marking draws your attention to information

about the product or about handling the product.

Emphasis

See …

Italics are used to emphasize and highlight text and

identify references to sections, diagrams, or external

documents and files.

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario