GABOR MD-ASL15W Manual de usuario

MD-ASL15W /SPRING LOADED

MONITORMOuNT

For 15″ - 27″(38.1-68.6 cm) LCD desktop computer monitors

User Manual

2 Welcome

The Gabor MD-ASL15W mounts your 15″–27″(38.1–68.6 cm) LCD computer monitor. It

attaches to your desk via a built-in clamp, freeing up valuable desk space and enabling

personalized monitor placement for improved safety and comfort over conventional monitor

stands. The MD-ASL15W’s arm incorporates an internal mechanical spring system, which

is safer than the gas springs found in similar products. This spring-loaded arm functions

as a counterbalance to support your monitor in any position. Multiple points of articulation

provide a full range of motion, making it easy to adjust your monitor’s height, tilt, swivel,

and roll.

Thank you for

choosing Gabor.

3Welcome

4 Overview

Overview Mounting Arm (x1)

M4x12 (x8) M4x30 (x8)

M6x25 (x2)

13X5.5X16.5 (x8)

(x1)

S=3mm (x1)

S=5mm

(x2)

(x1)

M4x12 (x8) M4x30 (x8)

M6x25 (x2)

13X5.5X16.5 (x8)

(x1)

S=3mm (x1)

S=5mm

(x2)

(x1)

Tools Required For

Installation

• Phillips Screwdriver

VESA Mount

Locking

collar

Shaft

Mounting

socket

Cable guides

Clamp

Clamp screws

Clamp locking

knob

Set screw

5Overview

M4 Hex Key Spacer Cable Clip/

Protective Caps

Ax4

Bx4

Cx1

Dx1

Fx1

Gx1

Ex4

M4x12 (x8) M4x30 (x8)

M6x25 (x2)

13X5.5X16.5 (x8)

(x1)

S=3mm (x1)

S=5mm

(x2)

(x1)

M4x12 (x8) M4x30 (x8)

M6x25 (x2)

13X5.5X16.5 (x8)

(x1)

S=3mm (x1)

S=5mm

(x2)

(x1)

M4x12 (x8) M4x30 (x8)

M6x25 (x2)

13X5.5X16.5 (x8)

(x1)

S=3mm (x1)

S=5mm

(x2)

(x1)

A(4) M4 × 12 screw

B(4) M4 × 30 screw

C3 mm hex key

D5 mm hex key

E(4) Spacer

FCable clip

G(1) Shaft Cap

HUser Manual

Supplied Parts & Hardware

Also Included

F G

M4x12 (x8)

M4x30 (x8)

(x1)

M5x12 (x8)

M5x30 (x8)

13X5.5X16.5 (x8)

S=4mm (x1)

B CA

13" - 27"(33-69cm)

Max. 8 kg every screen

±15°

(Installed in shaft)

M6x25

S=5mm

12.2″ (31 cm)

90°

85°

180°

360°

0-13.8

″

(0-35 cm)

+/-45°

360°

Max. 16.1″ (41 cm)

Product Speciﬁcations

Monitor display size:

15″–27″(38.1–68.6 cm)

Maximum load capacity (per arm):

17 lb. (7.8 kg)

VESA standard: 75 × 75, 100 × 100

Tilt: -90°/+85°

Swivel: 180°

Roll: 360°

• Installation: Clamp ﬁts desk edges up to

2.6″(6.5 cm) thick

•Arm width (extended): 28.7″(73 cm)

•Arm pivot: 180°

•Arm height adjustment

Angle: ±45°

Range: 0″–13.8″(0–35 cm)

•Shaft height: 12.2″(31 cm)

•Weight: 8.25 lb. (3.7 kg)

Speciﬁcations

Safety Warnings

Please read and follow the instructions and

keep this manual in a safe place.

Clean this product with only a soft, dry cloth.

Keep this product away from children.

Make sure everything is secure before

proceeding.

Make sure that this product is intact and

that there are no missing parts.

To avoid damage to this product, be careful

not to overtighten or improperly thread any

of the threaded ﬁttings.

Do not exceed the maximum load capacity.

Do not install this product on an unsteady

structure or one that is prone to vibration,

has a chance of being impacted, or is

susceptible to other movements. Reinforce

the structure as necessary before installing

this product.

Mounting surfaces should be sturdy and ﬂat.

Do not install this product on a weak, uneven

surface.

All photos are for illustrative purposes only.

Safety Warnings

GETTING STARTED:

Decide where you want to place your monitor. You'll be positioning your monitor directly in

front of you, at eye level, and approximately at an arm’s length away. You shouldn’t need to

turn your head to look at your monitor. If you have to strain to look at it, you should readjust

its position.

Getting Started

9Installation Instructions

ATTACHING THE SHAFT

• The MD-ASL15W easily

attaches to most desk

edges up to 2.6″(6.5 cm)

thick, even if your desk

is nearly ﬂush against a

wall. Before attaching

the shaft to your desk,

determine whether

you have enough room

to ﬁt the entire clamp

behind your desk. If you

have enough clearance

to attach the clamp

without removing the

bottom part of it, skip to

Clearance on this page.

• If your desk is close to

a wall or you don’t have

enough clearance to ﬁt

the entire clamp behind

your desk, you can

remove the bottom part

of the clamp. If this is

the case, skip to Limited

Clearance on page 10 .

Clearance

1. Loosen the clamp locking

knob until you can ﬁt the

clamp over the edge of

your desk.

2. Fit the clamp over the

edge of your desk, and

tighten the clamp locking

knob until the shaft is

securely mounted to

your desk.

• Continue with Attaching

Your Monitor to the VESA

Mounts on page 11 .

Limited Clearance

1. Use the included 5 mm

hex key to remove the

clamp screws.

2. Fit the top part of the

clamp behind your desk.

3. Underneath your desk,

align the screw holes in

the top and bottom parts

of the clamp.

• Note: It may help to

unscrew the clamp

locking knob ﬁrst.

4. Reinsert the clamp

screws and use the

included 5 mm hex key

to fasten them until fully

tightened.

5. Tighten the clamp locking

knob until the shaft is

securely mounted to your

desk.

• Continue with Attaching

Your Monitor to the VESA

Mounts on page 11 .

Installation Instructions

M4x12

Tabla de contenidos

Otros manuales de Rack y soporte de GABOR

GABOR

GABOR TM-1732 Manual de usuario

GABOR

GABOR CP-6 Manual de usuario

GABOR

GABOR Mainmast DMS-200 Manual de usuario

GABOR

GABOR Levitouch DM-552 Manual de usuario

GABOR

GABOR DMS-202 Manual de usuario

GABOR

GABOR FM-2742 Manual de usuario

GABOR

GABOR FSM-M Manual de usuario

GABOR

GABOR LTS-30 Manual de usuario

GABOR

GABOR FSM-S Manual de usuario

GABOR

GABOR LeviTouch DM-500 Manual de usuario

GABOR

GABOR FM-4265 Manual de usuario

GABOR

GABOR TM-SS Manual de usuario

GABOR

GABOR MD-BSL15W Manual de usuario

GABOR

GABOR Levitouch DM-550 Manual de usuario

GABOR

GABOR LTS-20 Manual de usuario

GABOR

GABOR FSM-L Manual de usuario

GABOR

GABOR ACCUGEAR UPMP-1000 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario