Fujitsu ETERNUS Manual de usuario
Server Connection Guide (iSCSI) for Oracle Solaris
3Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Preface
This document briefly explains the operations that need to be performed by the user in order to
connect an ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or
ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system to a
server running Solaris OS via an iSCSI interface.
This document should be used in conjunction with any other applicable user manuals, such as
those for the ETERNUS2000 model 100 or 200, ETERNUS4000 model 300, 400, 500, or 600, or
ETERNUS8000 model 700, 800, 900, 1100, 1200, 2100, or 2200 Disk storage system, server,
OS used, LAN cards, drivers, etc.
Note that this manual refers the following documents:
•Server Support Matrix
•ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage
System Settings for ETERNUS2000
•ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage
System Settings for ETERNUS4000, ETERNUS8000
•ETERNUSmgr Install Guide
•ETERNUSmgr User Guide
Also, note that in this document the ETERNUS2000 models 100 and 200, ETERNUS4000 mod-
els 300, 400, 500, and 600, and ETERNUS8000 models 700, 800, 900, 1100, 1200, 2100, and
2200 Disk storage systems are collectively referred to as ETERNUS Disk storage systems.
Third Edition
December 2010
The Contents and Structure of this Manual
This document is composed of the following ten chapters.
•Chapter 1 Workflow
This describes how to connect the ETERNUS Disk storage system to a server.
•Chapter 2 Checking the Server Environment
This describes which servers can be connected to ETERNUS Disk storage systems.
•Chapter 3 Notes
This describes issues that should be noted when connecting the ETERNUS Disk storage
systems and server.
Preface
Server Connection Guide (iSCSI) for Oracle Solaris
4Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
•Chapter 4 Checking the Server Information
This describes how to check the server information registered in the ETERNUS Disk storage
system.
•Chapter 5 Installing and Setting Up ETERNUSmgr
This describes how to install ETERNUSmgr.
•Chapter 6 Setting Up the ETERNUS Disk Storage Systems
This describes how to use ETERNUSmgr to set up the ETERNUS Disk storage systems.
•Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server
This describes how to install the iSCSI Software Initiator and set up the server.
•Chapter 8 Checking Connections
This describes how to check the connection status between server and ETERNUS Disk
storage systems.
•Chapter 9 Setting Up the Multipath Configuration
This describes what to be set in order to create multipath environment.
•Chapter 10 Creating a File System
This describes how to create a file system.
Safe Use of this Product
■Using this manual
This manual contains important information to ensure the safe use of this product. Be sure to
thoroughly read and understand its contents before using the product. After reading, store this
manual in a safe place for future reference.
FUJITSU has made every effort to ensure the safety of the users and other personnel, and to
prevent property damage. When using this product, carefully follow the instructions described in
this manual.
Acknowledgments
•Oracle and Java are registered trademarks of Oracle and/or its affiliates.
•All SPARC trademarks are used under license and are trademarks or registered trademarks
of SPARC International, Inc. in the United States and other countries.
•The company names, product names and service names mentioned in this document are
registered trademarks or trademarks of their respective companies.
Preface
Server Connection Guide (iSCSI) for Oracle Solaris
5Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Naming Conventions
■Product names
Oracle Solaris might be described as Solaris, Solaris Operating System, or Solaris OS.
■Other names
•"iSCSI port" or "Channel Adapter" (CA) refers to the iSCSI interface module used in the
ETERNUS Disk storage systems to connect to the server.
•"LAN card" refers to the iSCSI interface module normally used in the server. A "Network
Interface Card" (NIC), "LAN adapter", or "LAN board" may be used instead, depending on the
server.
Copyright 2010 FUJITSU LIMITED
Server Connection Guide (iSCSI) for Oracle Solaris
6Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Contents
Chapter 1 Workflow ...................................................................................7
Chapter 2 Checking the Server Environment..........................................9
2.1 Hardware ............................................................................................................ 9
2.2 Basic Software ................................................................................................... 9
2.3 Network Interface Card ...................................................................................... 9
2.4 Multipath Configuration ...................................................................................... 9
Chapter 3 Notes .......................................................................................10
3.1 LAN Environment Notes ................................................................................... 10
3.2 Server Startup and Power Supply Control Notes ............................................. 11
Chapter 4 Checking the Server Information..........................................12
Chapter 5 Installing and Setting Up ETERNUSmgr ..............................13
Chapter 6 Setting Up the ETERNUS Disk Storage Systems................14
Chapter 7 Installing the iSCSI Software Initiator
and Setting Up the Server .....................................................15
7.1 Installing the iSCSI Software Initiator ............................................................... 15
7.2 Setting Up the Server ....................................................................................... 15
7.2.1 Setting Up the Command Queue Depth .................................................................................... 16
7.2.2 iSCSI Basic Settings .................................................................................................................. 17
7.2.3 Server Settings when CHAP Authentication is Used ................................................................. 19
7.2.4 Server Settings when Bidirectional CHAP Authentication is Used ............................................ 21
Chapter 8 Checking Connections ..........................................................23
8.1 Turning on the Devices .................................................................................... 23
8.2 Logical Unit Recognition .................................................................................. 23
Chapter 9 Setting Up the Multipath Configuration ...............................24
9.1 Enabling MPxIO ............................................................................................... 24
9.2 Reconfiguring and Restarting the Server ......................................................... 24
Chapter 10 Creating a File System...........................................................26
Server Connection Guide (iSCSI) for Oracle Solaris
7Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Chapter 1 Workflow
Exactly which documents are required depends on the connection environment, see the "Work-
flow" section that follows for details.
Required Documents
•Server Support Matrix
•ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage
System Settings for ETERNUS2000
•ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS Disk Storage
System Settings for ETERNUS4000, ETERNUS8000
•ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Oracle Solaris (this
manual)
•ETERNUSmgr Install Guide
•ETERNUSmgr User Guide
Workflow
Install ETERNUSmgr and Set Up the ETERNUS Disk Storage System
If ETERNUSmgr is to be used, install it and set up the ETERNUS Disk storage system.
Refer
-"Chapter 4 Checking the Server Information" (page 12)
-"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 13)
-"Chapter 6 Setting Up the ETERNUS Disk Storage Systems" (page 14)
-Install ETERNUSmgr.
•"ETERNUSmgr Install Guide"
-Check the setup and maintenance operations.
•"ETERNUSmgr User Guide"
-Set up the ETERNUS Disk storage system.
•"ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS
Disk Storage System Settings for ETERNUS2000"
•"ETERNUS Disk storage systems Server Connection Guide (iSCSI) ETERNUS
Disk Storage System Settings for ETERNUS4000, ETERNUS8000"
Chapter 1 Workflow
>
Server Connection Guide (iSCSI) for Oracle Solaris
8Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Install the iSCSI Software Initiator and Set Up the Server
Set up the OS to connect to the ETERNUS Disk storage system.
Refer
-"Chapter 7 Installing the iSCSI Software Initiator and Setting Up the Server" (page 15)
Set the Server to Recognize the Logical Units
Set up the server so that it can recognize the ETERNUS Disk storage system logical units
(LUN).
Refer
-"8.2 Logical Unit Recognition" (page 23)
Configure the System
Set up the server as required by the system configuration.
Refer
-Set the multipaths.
•"9.1 Enabling MPxIO" (page 24)
-Set a file system.
•"Chapter 10 Creating a File System" (page 26)
Server Connection Guide (iSCSI) for Oracle Solaris
9Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Chapter 2 Checking the Server Environment
Server environment details are provided in the "Server Support Matrix".
2.1 Hardware
Refer to the "Server Support Matrix" for details.
2.2 Basic Software
Refer to the "Server Support Matrix" for details.
2.3 Network Interface Card
Refer to the "Server Support Matrix" for details.
2.4 Multipath Configuration
Refer to the "Server Support Matrix" for details.
Server Connection Guide (iSCSI) for Oracle Solaris
10 Copyright 2010 FUJITSU LIMITED
P3AM-4182-03ENZ0
Chapter 3 Notes
3.1 LAN Environment Notes
•The ETERNUS Disk storage system can be connected to a server via an existing LAN.
However, a decrease in LAN performance may be observed by prior users of said LAN.
•For the iSCSI LAN (used to transfer data), do not set multipath configuration with IP Network
Multipathing (IPMP).
•As with an FC-SAN, because of the large data flows (traffic volumes) the iSCSI LAN is
assumed to be a dedicated LAN separate from the business and management LANs, and
constructed with its own LAN switch.
•For IP network security reasons too, it is useful to separate the iSCSI LAN (for data transfers)
and management LAN (for administration) to prevent cross-access between them (use of
VLAN to separate the LAN segments is recommended).
•A configuration where multiple LAN ports of a single server are connected to the same
network may be restricted depending on the OS and/or driver specifications. For a multipath
connection, connect each path using different LAN segments by separating the VLAN and so
on.
Otros manuales para ETERNUS
4
Este manual sirve para los siguientes modelos
13
Tabla de contenidos
Otros manuales de Almacenamiento de Fujitsu
Fujitsu
Fujitsu ETERNUS AX Series Manual de instrucciones
Fujitsu
Fujitsu C141-E282 Manual de usuario
Fujitsu
Fujitsu ETERNUS LT140 Manual de usuario
Fujitsu
Fujitsu GP5-HDH461 Manual de usuario
Fujitsu
Fujitsu MAX3147NP Manual de usuario
Fujitsu
Fujitsu MHW2120BK Manual de usuario
Fujitsu
Fujitsu ETERNUS LT260 Manual de usuario
Fujitsu
Fujitsu ETERNUS DX100 S3 Manual de usuario
Fujitsu
Fujitsu GRANPOWER500 TEAMSERVER Series Manual de usuario
Fujitsu
Fujitsu Citrix XenServer Manual de usuario
Fujitsu
Fujitsu MAX3036FC Manual de usuario
Fujitsu
Fujitsu ETERNUS DX S5 Series Manual de usuario
Fujitsu
Fujitsu GP5-HD9G4 Manual de usuario
Fujitsu
Fujitsu MHT2080BH Manual de usuario
Fujitsu
Fujitsu AIRSTAGE UTY-ASGXZ1 Manual de usuario
Fujitsu
Fujitsu MBB2147RC SERIES Manual de usuario
Fujitsu
Fujitsu MHA2021AT Manual de usuario
Fujitsu
Fujitsu MPD3XXXAT Manual de usuario
Fujitsu
Fujitsu ETERNUS DX60 Manual de usuario
Fujitsu
Fujitsu MHW2040BH - Mobile 40 GB Hard Drive Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario