Fujitsu HandyDrive-5 Manual de usuario

HandyDrive-5 - Operations Manual R.1

HandyDrive-5

Operations Manual

R.1

HandyDrive-5 - Operations Manual R.1

HandyDrive Key Product Features

Capacity : 250/320/400/500GB (Using M250)

Sleek & Slim Design

85mm x 135mm x 15mm

Less than 170g

Power Saving Firmware (M250+Handy)

Backup Software

Security Password Lock Tool

Format & Partition Utility

Bundled Software Supports 11 Languages:

oEnglish

oFrench

oSpanish

oPortuguese

oGerman

oItalian

oRussian

oTraditional-Chinese

oSimplified-Chinese

oKorean

oJapanese

Warranty Period in Americas: 3 years (Asia:3yrs, EMEA:2yrs)

Fujitsu Supported Diagnostics

HandyDrive-5 - Operations Manual R.1

Table of Contents

HandyDrive HDD Installation

HandyDrive Hard Disk Format Tool

Backup Utility Software

Password Lock Tool

HandyDrive Diagnostics

Diagnostic Error Codes

HandyDrive-5 - Operations Manual R.1

HandyDrive Installation Steps

1. Plug the USB Mini-B end of the cable into the HandyDrive, and place the USB Series “A” plug

into the host computer.

2. MS Windows will detect the connection of a “USB Mass Storage Device”, and report that

“USB2.0 HandyDrive500” is ready for use. Depending upon the capacity, you will see the new

drive in the storage device list, e.g. Handy160 (D:)

3. Installation is complete, when the MS Windows

Found New Hardware

wizard reports that the

drive is ready for use.

Should the need arise to reset the partitions from the factory defaults; a Format & Partition

Utility is included with the bundled software package. See the next section of the manual for

the utility software operating procedure.

HandyDrive-5 - Operations Manual R.1

HandyDrive Hard Disk Format Tool

Purpose

The Hard Disk Format Tool is the software utility for Windows which enables you to reset the

HandyDrive partitions and the format to:

oThe factory default setting

oTo split drive into multiple partitions

oTo delete the partitions

Caution: The data inside the hard disk will be lost if any alteration, deletion or formatting of the

partition is executed. Please take extra care when using this software.

What does [Partition] mean?

It is the part or the area created by dividing the hard disk logically into multiple parts. One

hard disk is used as multiple drives by dividing the hard disk into multiple partitions.

What does [Format] mean?

This is the operation to enable write/read of data to hard disks and floppy disks etc. All the

recorded data are deleted when formatting is executed.

Operating Environments

This software operates under the environments described below.

Supported OS:

oMicrosoft® Windows Vista™ Ultimate

oMicrosoft® Windows Vista™Enterprise

oMicrosoft® Windows Vista™Business

oMicrosoft® Windows Vista™Home Premium

oMicrosoft® Windows Vista™Home Basic

oMicrosoft® Windows® XP Home Edition

oMicrosoft® Windows® XP Professional

oMicrosoft® Windows® 2000 Professional

oMicrosoft® Windows® Millennium Edition

oMicrosoft® Windows® 98 Second Edition

Caution: This software is a 32 bit application. As for this software operating in a 64 bit OS, it is not

guaranteed.

Supported Device:

oFUJITSU HandyDrive only.

HandyDrive-5 - Operations Manual R.1

Precautions and Limitations for Usage

oThis software can be used when only

one

HandyDrive is connected to the PC.

oIt cannot be used when no HandyDrive is connected, or two or more units are connected.

oClose all the other applications before use.

oDo not start other applications during use.

oThe contents of the disk may be corrupted if shutdown is executed during formatting.

Never

execute it.

oThe contents of the disk may be corrupted if this software is closed forcefully during

formatting.

Never execute it.

oDo not connect or remove the HandyDrive when using this software.

oLog on with the administrator's account, if you use this software on Windows Vista, Windows

XP or Windows 2000 Professional.

oReconnect the HandyDrive after using this software.

oWhen you reconnect the HandyDrive, execute

Safely Remove Hardware

in the task tray to

make it removable before you remove the HandyDrive and then reconnect it.

oRefer to the Quick Start Guide for the method to remove it.

oWhen you remove the hardware after using this software, an error message may be displayed

and it will become unremovable.

oIn this case, make sure that other applications are not using it first.

oIf the problem is not solved yet, restart the OS to remove properly.

oMake sure the PC does not enter into a

standby

suspend

state before using this software.

oDo not execute standby or suspend during use of this software.

oIf it becomes standby or suspend state during use of this software, the contents of the disk

may be corrupted.

oThe process may take a long time depending on the function.

oConnect an AC adapter to the PC to prevent shortage of battery power during the process if

using on a notebook PC.

oThis software can only create a maximum of 8 partitions.

HandyDrive-5 - Operations Manual R.1

Installation

Caution: When the OS is upgraded with the Hard Disk Format Tool, the operation of the Hard Disk

Format Tool is not guaranteed. Please uninstall the Hard Disk Format Tool before upgrading the OS

and re-install latest version of the Hard Disk Format Tool after upgrading the OS.

Please uninstall old version of the Hard Disk Format Tool before installing latest version of the Hard

Disk Format Tool. Refer to section, "Uninstall".

Install this software package using the following procedure below.

1. Log on with the administrator's account, if you are use Windows Vista, Windows XP or

Windows 2000 Professional.

2. Double-click UtySetup.exe to start installation.

a. In Windows Vista, when the User Account Control is valid

b. Click [Allow] when the "User Account Control" dialog box is displayed, and selecting

the [Cancel] or [Allow] is required.

3. Click [Next >] when the computer is ready for installation, and the "Welcome to the

InstallShield Wizard for HandyDrive Format Tool V3.21" dialog box is displayed.

4. Click [Finish] when the installation is over and "InstallShield Wizard Completed" dialog box is

displayed.

Running the Software

Start this software using the following procedure below.

1. Connect only one HandyDrive to the PC.

2. Click the [Start] menu of [Task Bar].

3. Click the [All Programs] menu in case of Windows XP/Vista and, [Programs] in case of

Windows98SE/Me/2000.

4. Click the [Fujitsu HandyDrive] menu.

5. Click the [Hard Disk Format Tool V3.21] menu.

6. Click [Format Tool].

a. In Windows Vista, when the User Account Control is valid, Click [Allow] when the "User

Account Control" dialog box is displayed, and selecting the [Cancel] or [Allow] is

required.

7. Click [Yes],

after confirming the contents in the list

, when the dialog box "Handling

Precautions" is displayed.

HandyDrive-5 - Operations Manual R.1

After clicking [Yes], the Format Tool Application Dialog will open, as shown below.

Select the operation you wish to execute, by clicking on that button from the Operation Menu.

HandyDrive-5 - Operations Manual R.1

Display of the User's Guide

Display the user's guide for this software package, following the method below.

[Displaying from this software]

Click [Help]-[Users Guide] from the menu bar at the

top

of the main screen.

[Displaying from the start menu]

1. Click [Start] on the [Task Bar].

2. Click [All Programs] menu in case of Windows XP/Vista, click the [Programs] menu in case

of Windows98SE/Me/2000.

3. Click the [Fujitsu HandyDrive] menu.

4. Click the [Hard Disk Format Tool V3.21] menu.

5. Click [User's Guide].

Uninstall

Uninstall the Hard Disk Format Tool using the following procedure below.

1. Log on with the administrator's account if you use Windows Vista, Windows XP or Windows

2000 Professional.

2. Open [My Computer] and click [Control Panel]. Note: [Control Panel] can also be opened

through [Start]-[Settings]-[Control Panel].

a. In Windows Vista, click [Control Panel] from the Windows [Start] menu.

3. Open [Add or Remove Programs].

a. In Windows Vista, open [Uninstall a program].

4. Select [HandyDrive Format Tool V3.21] and click the [Remove].

a. In Windows Vista, select [HandyDrive Format Tool V3.21] and click the

[Uninstall].

5. Click [Yes] when the "Are you sure you want to remove HandyDrive Format Tool V3.21 from

your computer?" dialog box is displayed.

6. Uninstallation starts.

a. In Windows Vista, when the User Account Control is valid, Click [Allow] when the "User

Account Control" dialog box is displayed, and selecting the [Cancel] or [Allow] is

required.

HandyDrive-5 - Operations Manual R.1

Backup Utility Software

Installation

Install this software package using the following procedure below.

1. Log on with the administrator's account, if you are use Windows Vista, Windows XP or

Windows 2000 Professional.

2. Double-click tih_s_e.exe to start installation.

a. In Windows Vista, when the User Account Control is valid

b. Click [Allow] when the "User Account Control" dialog box is displayed, and selecting

the [Cancel] or [Allow] is required.

3. Click [Install] when the "Acronis® True Image Home" dialog box is displayed.

4. Click [Next >] when the computer is ready for installation, and the "Welcome to the Acronis

True Image Personal HDD Setup" dialog box is displayed.

5. If you accept the software license agreement, Click on “I accept this agreement”, and then

[Next].

6. At the “Serial Number Dialog”, enter your serial number provided, and click [Next].

7. At the “Custom Setup Dialog”, you can [Browse] for your own installation directory, or accept

the default directory, by clicking [Next].

8. At the Select Administration Option Dialog, Choose whether to allow all users to access this

utility, or only the administrator, and Click [Next].

9. After all options are selected, Click [Proceed].

10.At the “Installation Complete” Dialog, Click [Close] to exit the installation. You are done!

Tabla de contenidos

Otros manuales de Almacenamiento de Fujitsu

Fujitsu

Fujitsu ETERNUS DX Disk Manual de usuario

Fujitsu

Fujitsu ETERNUS DX200 S3 Manual de usuario

Fujitsu

Fujitsu FibreCAT S80 Manual de usuario

Fujitsu

Fujitsu ETERNUS LT140 Manual de usuario

Fujitsu

Fujitsu MAN3735 SERIES Manual de usuario

Fujitsu

Fujitsu ETERNUS CS800 Manual de usuario

Fujitsu

Fujitsu ETERNUS2000 model 100 Manual de usuario

Fujitsu

Fujitsu MAX3073NC SCSI,80, DC961,Hard Manual de usuario

Fujitsu

Fujitsu RDX USB 3.0 QuikStor Drive Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 S3 Guía de instalación

Fujitsu

Fujitsu ETERNUS DX400 series Manual de usuario

Fujitsu

Fujitsu MHN2100AT - Mobile 10 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu MPC3096AT - Desktop 9.7 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu ETERNUS DX Disk Manual de usuario

Fujitsu

Fujitsu M2266S Nota de versión

Fujitsu

Fujitsu MHK2120AT - Mobile 12 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu MAS3184NC/NP Manual de usuario

Fujitsu

Fujitsu ETERNUS LT20 S2 Manual de usuario

Fujitsu

Fujitsu MBA3300FD Manual de usuario

Fujitsu

Fujitsu PRIMERGY SX960 S1 Manual de usuario

Fujitsu

Fujitsu ETERNUS LT20 S2 Cómo utilizar

Fujitsu

Fujitsu ETERNUS DX60 Manual de usuario

Fujitsu

Fujitsu MAX3036RC SERIES Manual de usuario

Fujitsu

Fujitsu MHZ2040BH - Mobile 40 GB Hard Drive Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario