Fujitsu PRIMERGY RX200 S3 Manual del propietario
PRIMERGY
PRIMERGY RX200 S3 Server
Service Supplement
Joachim Pichol
Fujitsu Siemens Computers GmbH Paderborn
33094 Paderborn
Tel.: (05251) 14888-18
Fax: (++49) 700 / 372 00001
RX200 S3
Sprachen: En
Edition August 2006
Comments… Suggestions… Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Fax forms for sending us your comments are included in
the back of the manual.
There you will also find the addresses of the relevant
User Documentation Department.
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2006 Fujitsu Siemens Computers GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
RX200 S3 Service Supplement
Contents
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Overview of the documentation . . . . . . . . . . . . . . . . . . 5
1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . . 7
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 11
4 Replacing components . . . . . . . . . . . . . . . . . . . . 17
4.1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.2 Pulling out / removing the server . . . . . . . . . . . . . . . . 17
4.3 Opening/closing the server . . . . . . . . . . . . . . . . . . . 19
4.4 Replacing the control panel kit . . . . . . . . . . . . . . . . . 20
4.5 Replacing the chassis ID / temperature sensor . . . . . . . . . 21
4.6 Replacing the fan backplane . . . . . . . . . . . . . . . . . . 22
4.7 Replacing the SAS backplane for 3.5-inch drives . . . . . . . . 23
4.8 Replacing the SAS backplane for 2.5-inch drives . . . . . . . . 24
4.9 Replacing the power-sharing board (power backplane) . . . . . 25
4.10 Replacing the system board . . . . . . . . . . . . . . . . . . . 27
5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
5.1 Control panel board (LED board) . . . . . . . . . . . . . . . . 29
5.2 Backplanes for SAS drives . . . . . . . . . . . . . . . . . . . 30
5.2.1 SAS backplane for 3.5-inch drives . . . . . . . . . . . . . . . 30
5.2.2 SAS backplane for 2.5-inch drives . . . . . . . . . . . . . . . 31
5.3 Fan backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.4 Power-sharing board . . . . . . . . . . . . . . . . . . . . . . 33
6 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6.1 Cable overview . . . . . . . . . . . . . . . . . . . . . . . . . 35
6.2 Cable layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
RX200 S3 Service Supplement 5
1 Preface
The PRIMERGY RX200 S3 is an Intel-based server for mid-tier applications in
server farms. The server is well suited for front end services as well as for use
as an e-mail server, Internet server, or general applications server.
1.1 Overview of the documentation
Concept and target groups
This Service Supplement adds to the information provided in the Operating
Manual, the Options Guide and the Technical Manual for the system board.
VCaution!
The activities described in this manual may only be performed by
specialist personnel with technical training.
IHow to install/remove the hot-plug components is described in the
Operating Manual for the server.
Service DVD
A service DVD PRIMERGY is available for Fujitsu Siemens service partners.
This DVD contains the following manuals as PDF files:
– The “Security” manual
– The Operating Manual for the PRIMERGY RX200 S3
– The Technical Manual for the system board D2300
– The Options Guide for the PRIMERGY RX200 S3
– The Service Supplement for the PRIMERGY RX200 S3
– The “BIOS Setup” manual
6 ServiceSupplement RX200 S3
Overview of the documentation Preface
Information/activity Manual
Performance features and technical data of
the server Operating Manual
Installation and activation, including:
– External connections to the server
– Operation
– Configuration of the server
– Installation of the rack mounting kit
Troubleshooting
Installation/removal of all hot-plug compo-
nents:
– Hot-plug power supply units
– Hot-plug HDD modules
– Hot-plug system fans
Information about the system board:
– Performance features of the system
board
– Connector assignment
– Jumper settings
– Replacing the battery
Technical Manual
Extensions and conversions:
– Extending/replacing main memory
– Installing a second processor/replacing
the processor/heat sink
– Installing accessible drives
– Installing controllers in non-hot-plug PCI
slots
– Installing RemoteView components
Options Guide
Replacing components:
– Replacing the control panel
– Replacing the fan backplane
– Replacing the SAS backplane
– Replacing the power-sharing board
– Replacing the system board
Service Supplement
Settings
Cabling
Table 1: Overview of the RX200 S2 documentation (part 1 of 2)
RX200 S3 Service Supplement 7
Notational conventions
1.2 Notational conventions
The following notational conventions are used in this manual:
BIOS settings BIOS Setup
Detailed security information Security Manual
Italics indicate commands, menu items or software programs.
“Quotation marks” indicate names of chapters and terms that should be
emphasized.
Êtext which follows this symbol describes activities that
must be performed in the order shown.
VCAUTION! pay particular attention to text marked with this symbol.
Failure to observe this warning may endanger your life,
damage the server, or lead to loss of data.
Isupplementaryinformation,remarksandtipsfollowthis
symbol.
Table 2: Notational conventions
Information/activity Manual
Table 1: Overview of the RX200 S2 documentation (part 2 of 2)
RX200 S3 Service Supplement 9
2Procedure
VCAUTION!
The actions described in this manual should only be performed by
engineers, service personnel or technical specialists.
ÊFirst of all please familiarize yourself with the safety instructions in the
chapter “Safety Instructions” on page 11f.
ÊMake sure that all required manuals (see Service-DVD) are available,
printing out the PDF files if necessary. You will definitely need:
– the Operating Manual for the server and
– the Options Guide for the server
– the Technical Manual for the system board.
ÊShut down the server correctly, switch it off, pull out the power plug, and
open the server as described in the chapter “Replacing components” on
page 17ff.
ÊReplace the defective component, as described in the relevant chapter.
ÊClose the server.
ÊConnect up the server cables.1
ÊConnect the server to the mains.1
ÊStart the operating system.1
ÊIf necessary, perform the relevant configuration.1
1These procedures are described in the Operating Manual.
Otros manuales para PRIMERGY RX200 S3
3
Tabla de contenidos
Otros manuales de Servidor de Fujitsu
Fujitsu
Fujitsu PRIMERGY RX800 S2 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX100 S3 Manual de usuario
Fujitsu
Fujitsu FW-S Series SERVIS Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX200 S2 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX150 S7 Manual de usuario
Fujitsu
Fujitsu PRIMERGY RX200 S3 Guía
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX200FT S2 Guía
Fujitsu
Fujitsu BS2000/OSD Manual de usuario
Fujitsu
Fujitsu SPARC Enterprise M4000 Manual de usuario
Fujitsu
Fujitsu PRIMERGY CX420 S1 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX1310 M5 Manual de usuario
Fujitsu
Fujitsu FUTRO S9010 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX150 S6 Guía
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Manual de servicio
Fujitsu
Fujitsu FUTRO S450 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX200 S5 Manual de usuario
Fujitsu
Fujitsu PRIMERGY RX600 S3 Guía
Fujitsu
Fujitsu PRIMERGY 870 Manual de usuario
Fujitsu
Fujitsu PRIMERGY CX122 S1 Manual del propietario
