Fujitsu BS2000/OSD Manual de usuario

U25339-J-Z126-1-7600 1

1 Introduction

The range of BS2000/OSD servers has been extended by the addition of the S130 series.

The spectrum of user facilities of the new models lies between the S110 and H130 server

series. They are powerful systems for scientiﬁc and commercial applications.

The S130 Business Server (or cluster) has a modular structure and can easily be upgraded

on site.

The main memory can be expanded by up to 8 Gbytes. Global storage (GSP or SSU) can

be upgraded to a maximum of 32 Gbytes and if desired can have a battery buffer.

The input/output system consists of 1 or 2 input/output processors. Up to 248 channels can

be conﬁgured for connecting peripheral devices with channel interfaces. LAN networking is

possible via the 3970-SKP service/console processor, a connection to the TRANSDATA

network world via front-end processors.

The service processor (SVP) and the external 3970-SKP service/console processor

supportcommonoperation,monitoring,diagnosisandmaintenanceofthecomputeraswell

as TELESERVICE.

The models can easily be integrated into a HIPLEX network.

Like all computers in the 7.500 system family, the business server uses the BS2000

operating system. This offers the portability and compatibility of BS2000 programs.

1.1 Objectives and target group

This manual provides you with all the information you require to operate the S130 Business

Server via the service/console processor, and is thus intended for operators and system

managers.

Knowledge of BS2000 system operation and management as well as basic knowledge of

SINIX are required.

Further manuals with information on the operation of BS2000, SINIX and TELESERVICE

are listed under “Related publications” at the end of this manual.

2U25339-J-Z126-1-7600

Summary of contents Introduction

1.2 Summary of contents

This operating manual covers the hardware operating functions of the S130 Business

Server with the 3970-SKP service/console processor.

The chapters “Overview”, “Controls and indicators” and “Standard processing in SVP

mode” provide information on hardware and the operating concept. You should read these

chapters ﬁrst.

The chapter entitled “Troubleshooting” provides valuable assistance in recognizing and

solving problems.

A keyword index at the end of the manual helps you to ﬁnd the relevant information quickly.

1.3 Notational conventions

Some text passages are marked using the following symbols:

Information that is particularly important for the function of the product.

Important instructions, e.g. warnings.

Reference to the “SINIX-2000 V7.0” [1] manual.

ÊThe input symbol indicates actions which must be carried out (e.g. keyboard input).

ËThis character represents a blank in keyboard input.

[ ... ] References to relevant literature or optional parameters in commands are given in

square brackets.

This typewriter font is used for names, commands and messages (e.g. the

/DETË*CHA(xx) command).

U25339-J-Z126-1-7600 3

2 Important instructions

This chapter covers the most important safety instructions. It also includes some manufac-

turer instructions and notes on radio interference.

2.1 Safety instructions

This device fulﬁlls the prevailing safety requirements for information technology equipment,

including electrical ofﬁce machines.

●In emergencies (e.g. damaged housing, operating elements or network cables, entry of

liquid or foreign objects), switch off the device immediately (EMERGENCY STOP) and

contact our service department.

Figure 1: EMERGENCY STOP switch on the S130 Business Server, global storage and battery unit

●The system must have a direct power supply for safety reasons. The systems may only

be installed by authorized trained personnel.

S130 Business Server Global storage Battery unit

EMERGENCY STOP

4U25339-J-Z126-1-7600

Manufacturer instructions Important instructions

●The cables must be laid in such a way that there is no danger of anyone tripping over

them and they cannot be damaged.

●Data transmission lines must not be connected or disconnected during electrical

storms.

●Ensure that no foreign bodies (e.g. necklaces, paperclips etc.) or liquids ﬁnd their way

into the device (danger of electric shock, short circuit).

●Repairs to the device may only be carried out by authorized and trained personnel. All

areas which are secured by locks or can only be opened using tools are maintenance

areas and may only be accessed by trained personnel.

Unauthorizedopening of the maintenance area and improper repairs can bedangerous

for the user (electric shock, danger of ﬁre).

2.2 Manufacturer instructions

This product complies with the EC guideline 89/336/EEC "Electronic Compati-

bility". The product bears the EC certiﬁcate.

2.3 RFI suppression

WARNING: This is a class A equipment. This equipment may cause interference to

radio and television reception in a residential installation. If it does cause inter-

ference, the user may be requested to take appropriate corrective measures at his

or her own cost.

The devices generate and emit high-frequency energy.

If the devices are installed and used other than as instructed in the manual, failures in the

devices or other electric systems may occur. If failures of this type occur it is the task of the

user to carry out measurements and implement measures to solve the problem. Only the

cables supplied with the system or recommended by SNI may be used.

All other devices which are connected to the present product must be radio interference

suppressed in accordance with BMPT Order No. 1046/84 and Order No. 243/91 or EU

Directive 89/336/EEC. Products which satisfy this requirements are provided with an appro-

priate certiﬁcate by the manufacturer and bear the CE mark or the interference suppression

symbol.

U25339-J-Z126-1-7600 5

3 Overview

This chapter provides information on the conﬁguration levels and the conﬁguration of the

S130 Business Server series and the concept of system operation.

Figure 2: S130 Business Server, global storage and battery unit

The S130 Business Server comprises two cabinets together with an additional cabinet for

channel extensions.

Two global storage units can be connected, each of which is located in a separate cabinet.

The battery unit for global storage consists of three cabinets.

3.1 Conﬁguration levels of the S130 Business Server

The S130 Business Server series consists of ﬁve models. Upgrading of the individual

models can easily be carried out on site, so that system downtime is not extended due to

hardware installation.

All the S130 models have multiple processing units, I/O processors and channel groups.

Thus a reconﬁguration is possible for these models if there is a partial failure.

If a processing unit fails, the other processors take over its tasks during operation (dynamic

reconﬁguration).

S130 Business Server Global storage Battery unit

6U25339-J-Z126-1-7600

Conﬁguration levels of the S130 Business Server Overview

IftheHVZ(high-availabilityfeature)optionS130K-1Hisavailable,adefectiveprocessorcan

bereplacedwiththehigh-availabilityprocessor(the high-availabilityfeatureisonlyavailable

for the models S130-C, S130-E and S130-P).

Figure 3: Hardware overview of the S130 Business Server system with 3970-SKP

Model Number of processors Performance factor

S130-C 2 processing units 1.0

S130-E 3 processing units 1.4

S130-K 4 processing units 1.9

S130-P 6 processing units 2.6

S130-T 8 processing units 3.1

ATOP

TELESERVICE

Radio-controlled clock/

V.24

S130

I/O channel

On/off facility

SKP

LAN

Printer

(optional)

LAN

GTS

U25339-J-Z126-1-7600 7

Overview Concept of system operation

3.2 Concept of system operation

System operation is described in the chapter “Basics of system operation“ of the

“SINIX-2000 V7.0“ [1] manual.

The following section lists the most important hardware and software components for S130

operation.

3.2.1 Hardware

The following hardware and software components are important for the operation of S130:

●Service processor (SVP) in the S130 CPU.

This is responsible for the following tasks in the S130 CPU:

– initialization

– monitoring

– controlling

– hardware diagnosis

Radio-controlled clock/ serial

V.24 SVP

S130

I/O channel

SKP

LAN

Console

ATOP serial

CPU

On/off facility

LAN

serial

Secondary

console

GTS

8U25339-J-Z126-1-7600

Concept of system operation Overview

●The service/console processor (3970-SKP) with the SINIX operating system.

OperationoftheS130systemtakesplaceviaalocalPC:the3970-SKPservice/console

processor.

S130 and 3970-SKP communicate with one another in three ways:

– serial line (V.24)

– type-2 I/O channel (KT2) or type-S I/O channel

– LAN connection

The following components can be operated via the local 3970-SKP screen and remote

secondary consoles:

– the 3970-SKP itself

– the SVP of the S130

– the BS2000 running on the S130

●Consoles can be set up and operated directly for up to 15 VM2000 guest systems.

●Automatic Operator (ATOP).

The ATOP is a device which is connected to the 3970-SKP via a serial line.

It makes the following functions possible:

– automatic switching on and off of the S130

– automatic operation of the BS2000 system

The customer can program the ATOP to specify which operating functions should

be executed for which conditions.

Examples:

– automatic shutdown of the system in the case of fan failure.

– automatic command entry in reaction to certain BS2000 console messages.

●It is possible to connect a radio-controlled clock or Global Time Server (GTS).

●On/off facility (optional) makes it possible to switch the S130 on and off from the

3970-SKP.

U25339-J-Z126-1-7600 9

Overview Concept of system operation

3.2.2 Software

The following software components play an important role in S130 operation:

●Window interface

The SINIX operating system is run on the 3970-SKP. One component of SINIX is the

window interface based on the X Window system (see the ”SINIX-2000 V7.0” [1]

manual).

A brief introduction to the window system can be found in the chapter entitled

"Brief introduction to the window system" in the "SINIX-2000 V7.0" [1] manual.

Further information can be found in the "SINIX/windows User Environment

V3.0" [3] manual.

The following system components use the window system:

– BS2000 (e.g. CONS0 or EM9750 window, see page 34)

– SVP (e.g. SVPST0 window, see page 34)

– SINIX (e.g. SINIX or EVENT window, see page 34)

The system provides preconﬁgured windows for operation which are opened automat-

ically when the 3970-SKP is started up.

The number of windows for operating BS2000 and SINIX, the order of the

windows on the screen, their size and some other properties can be changed

using the relevant conﬁguration functions.

Information on this can be found in the chapter entitled "Conﬁguring the

system", in the sections "X screens" and "Virtual screens", in the "SINIX-2000

V7.0" manual.

●Console distribution program KVP (German acronym)

The operation of the BS2000 from the 3970-SKP is controlled by the Console Distri-

bution Program. KVP carries out the following tasks:

– authorization controls

– distribution of the BS2000 tasks to several consoles

– short and long term logging of the console trafﬁc

KVP requires parameters that are stored in the KVP parameter ﬁle of the built-in disk of

the3970-SKP.TheKVPparametersare created in SINIX when the system isgenerated

and can be changed with the help of the SINIX conﬁguration.

InformationonconﬁguringtheKVPcanbefoundinthechapterentitled“Conﬁguring

the system”, in the section “KVP”, in the “SINIX-2000 V7.0” manual.

10 U25339-J-Z126-1-7600

Concept of system operation Overview

3.2.3 Authorization control

The access to operation of the BS2000, SVP and SINIX system components is protected:

●Access to the BS2000 console

If you try to make an entry in a BS2000 control window after the system has been

started up for the ﬁrst time, you will be requested to enter a password.

The password is speciﬁed when the system is installed and is identical to the password

for the corresponding SINIX user ID (e.g. cons0 for the CONS0 console window). For

further information, see chapter “Operating the BS2000 console” on page 89.

●Access to the BS2000 system administration

If you want to work as a system administrator in BS2000, you must use a type EM9750

window, ﬁll in the welcome screen, and log in by entering a BS2000 user ID (i.a. tsos)

and - if agreed - a BS2000 password for BS2000.

●Access to the SINIX system administration

If you want to carry out system administration tasks under SINIX you must log into a

SINIX window by entering a SINIX user ID (i.a. admin, root or sysadm) and password.

●Access to the EVENT window

Certain functions can be executed using the EVENT window.

If you try to make an entry in this window after the system has been started up for the

ﬁrst time, you will be requested to enter the password for the SINIX user ID.

●Access to the SVP operation

After you have ﬁlled out and sent off the welcome screen in the window for SVP

operation, the system requests you to enter the password. The password is speciﬁed at

the installation of the system and is identical to the password for the corresponding

SINIX user ID (e.g. the ID svpst0 for the SVPST0 window).

Otros manuales para BS2000/OSD

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu SPARC Enterprise T2000 Manual de servicio

Fujitsu

Fujitsu Primergy RX100 S3 Manual del propietario

Fujitsu

Fujitsu PRIMERGY RX330 S1 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M3000 Manual de servicio

Fujitsu

Fujitsu Primergy Econel 100 S2 Guía

Fujitsu

Fujitsu PRIMERGY TX1330 M2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX1320 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2450 M1 Manual de usuario

Fujitsu

Fujitsu SPARC M10-4 Manual de usuario

Fujitsu

Fujitsu M10 Series Manual de servicio

Fujitsu

Fujitsu PRIMERGY BX900 Guía rápida de usuario

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX600 S6 Manual del propietario

Fujitsu

Fujitsu PRIMERGY TX140 S1p Manual de usuario

Fujitsu

Fujitsu SPARC M10-1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2530 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX920 S2 Manual de usuario

Fujitsu

Fujitsu Primergy RX300 S3 Manual de usuario

Fujitsu

Fujitsu SPARC ENTERPRISE T5220 Manual de usuario

Fujitsu

Fujitsu Primergy RX300 S4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX300 S5 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manual de usuario

Fujitsu

Fujitsu SPARC M10-4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX140 S1 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario