Fujitsu PRIMERGY CX420 S1 Manual de usuario

Operating Manual - English

PRIMERGY CX420 S1

Dual Node Cluster Server

Operating Manual

Edition October 2013

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

CX420 S1

Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Operating Manual

CX420 S1

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

CX420 S1

Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Concept and target groups for this manual . . . . . . . . . . 7

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 8

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 10

2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 11

2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2 Dual Node Cluster Server specification . . . . . . . . . . . 13

3 Installation steps, overview . . . . . . . . . . . . . . . . . . 19

4 Important information . . . . . . . . . . . . . . . . . . . . . 21

4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 21

4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 29

4.3 FCC Class A Compliance Statement . . . . . . . . . . . . . 30

4.4 Transporting the Dual Node Cluster Server . . . . . . . . . 31

4.5 Notes on installing the Dual Node Cluster Server

in the rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

4.6 Environmental protection . . . . . . . . . . . . . . . . . . . 33

5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 35

5.1 Unpacking the Dual Node Cluster Server . . . . . . . . . . 36

5.2 Installing/removing the Dual Node Cluster Server

in/from the rack . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.3 Installing a server node to the Dual Node Cluster Server . . 39

Operating Manual

CX420 S1

Contents

5.4 Connecting the Dual Node Cluster Server to the mains . . . 40

5.4.1 Securing the power cord . . . . . . . . . . . . . . . . . . . . . 41

5.5 Notes on connecting/disconnecting cables . . . . . . . . . . 42

6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 43

6.1 Overview of the Dual Node Cluster Server . . . . . . . . . . 43

6.1.1 Front overview . . . . . . . . . . . . . . . . . . . . . . . . . . 43

6.1.2 Rear overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

6.1.2.1 CX420 S1 Dual Node Cluster Server with CX272 S1 server

nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

6.1.3 Controls and indicators . . . . . . . . . . . . . . . . . . . . . . 45

6.1.3.1 Controls and Indicators on the front panel . . . . . . . . . . 45

6.1.3.2 Indicators on the hard disk drives . . . . . . . . . . . . . . . 47

6.1.3.3 Indicator on hot-plug power supply unit . . . . . . . . . . . . 48

6.1.3.4 Indicators of the server nodes . . . . . . . . . . . . . . . . . 48

6.2 Switching the multi-node server system on and off . . . . . 49

6.3 Cleaning the Dual Node Cluster Server . . . . . . . . . . . . 52

7 Property and data protection . . . . . . . . . . . . . . . . . . 53

7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 53

8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 55

8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 55

8.2 Drives reported as “dead” when starting system . . . . . . . 56

8.3 Added drive reported as defective . . . . . . . . . . . . . . . 56

CX420 S1

Operating Manual 7

1 Introduction

The PRIMERGY CX420 S1 Dual Node Cluster Server represents the first

generation of multi-node systems for large data centers as well as for small and

medium size environments. It is the 2U rack optimized enclosure to be filled with

standard infrastructure, components and applications. Due to its conventional

front-to-back cooling and rear side external connectivity it enables for cost-

effectiveness through installation and operation in existing rack infrastructures

and air conditioning. A low level of complexity is granted by avoiding sharing of

fabrics, I/O or management components. The main ingredients like server

nodes, power supply units (PSUs) and disk drives are hot-plug enabled for

enhanced availability and lowered servicing effort. The approach to minimized

energy consumption is underlined by up to two redundant, highly efficient (94%)

80Plus Platinum PSUs, providing power for all built-in parts.

Efficient cooling is guaranteed by the four centrally installed fan units.

depending on the specific applications’ characteristics. All server nodes are

half-wide, thus two of them may be positioned besides each other, and up to two

2U nodes are the maximum number per PRIMERGY CX420 S1 Dual Node

Cluster Server, thus density may be doubled compared to standard rack

servers. Great flexibility is given through the different types of local disk drives,

being installed at the enclosure front side. Up to twelve 2.5 or 3.5 storage drives

are usable, be it HDDs or SSDs, both with either SATA or SAS interfaces. The

drives are assigned to the installed server nodes group wise, adaptable to any

demand and wallet.

The highly compact Dual Node Cluster Server occupies two height units (HU)

in the rack.

1.1 Concept and target groups for this manual

This operating manual describes how to install, set up and operate your Dual

Node Cluster Server.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your PRIMERGY CX420 S1 Dual Node Cluster

Server into operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

8 Operating Manual

CX420 S1

Introduction

1.2 Documentation overview

More information on your PRIMERGY CX420 S1 Dual Node Cluster Server can

be found in the following documents:

– "Quick Start Hardware - PRIMERGY CX420 S1 Dual Node Cluster Server"

leaflet

(only included as a printed copy)

– "Quick Start Software - Quick Installation Guide" DVD booklet

(only included with the ServerView Suite as a printed copy)

– "Safety Notes and Regulations" manual

"安全上のご注意 " for the Japanese market

– "Warranty" manual

"保証書 " for the Japanese market

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for the Japanese market

– "PRIMERGY CX420 S1 Dual Node Cluster Server Upgrade and

Maintenance Manual"

Further information

The PRIMERGY CX420 S1 Dual Node Cluster Server is a multi-node system.

For information on the individual server nodes please refer to the following

manuals:

– PRIMERGY CX272 S1 Server Node Operating Manual

– "D3306 BIOS Setup Utility for PRIMERGY CX272 S1 Server Node "

Reference Manual

– "PRIMERGY CX272 S1 Server Node Upgrade and Maintenance manual"

CX420 S1

Operating Manual 9

Introduction

IPRIMERGY manuals are available in PDF format on the

ServerView Suite DVD 2. The ServerView Suite DVD 2 is part of the

ServerView Suite supplied with every Dual Node Cluster Server.

If you no longer have the ServerView Suite DVDs, you can obtain the

relevant current versions using the order number U15000-C289 (the

order number for the Japanese market: please refer to the configurator

of the Dual Node Cluster Server

http://jp.fujitsu.com/platform/server/primergy/system/).

The PDF files of the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found using the URL (for EMEA market):

http://manuals.ts.fujitsu.com. The PRIMERGY server documentation can

be accessed using the Industry standard servers navigation option.

For the Japanese market:

Please refer to the following URL for the latest product manuals:

http://jp.fujitsu.com/platform/server/primergy/manual/

Before using the product, please check for additional information that

may be available under the following URL:

http://jp.fujitsu.com/platform/server/primergy/products/note/

Further sources of information:

– ServerView Suite Glossary

– Manual for the monitor

– Documentation for the boards and drives

– Operating system documentation

– Information files in your operating system

10 Operating Manual

CX420 S1

Introduction

1.3 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands or menu items.

"Quotation marks" indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

Otros manuales para PRIMERGY CX420 S1

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu SPARC Enterprise T5120 Manual de usuario

Fujitsu

Fujitsu SPARC M10-4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX200 S2 Manual de usuario

Fujitsu

Fujitsu T2555SC020IN Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX100 S1 Manual de usuario

Fujitsu

Fujitsu SPARC M10-4 Manual de usuario

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Instrucciones de funcionamiento y mantenimiento

Fujitsu

Fujitsu PRIMERGY CX400 M1 Guía del usuario

Fujitsu

Fujitsu PRIMERGY SX650 Instrucciones de instalación

Fujitsu

Fujitsu Primergy RX4770 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX120 S2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY MX130 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX600 S6 Manual del propietario

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Manual de usuario

Fujitsu

Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Manual de lista de piezas

Fujitsu

Fujitsu PRIMERGY TX2540 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY ECONEL 30 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX120 S2 Manual del propietario

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Instrucciones de montaje

Fujitsu

Fujitsu SPARC Enterprise T5140 Guía de instalación

Fujitsu

Fujitsu PRIMERGY TX600 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX2550 M4 Manual de usuario

Fujitsu

Fujitsu BS2000 SE Series Manual de usuario

Fujitsu

Fujitsu SPARC M10-1 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario