Flying Industry Development S4PUA-AC220 Manual de usuario

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

RF Wireless Remote Control Radio Controller / Transmitter & Receiver

Package Include:

1 x Receiver: S4PUA-AC220 (4 Channel / Four Control Modes / AC100~240V)

2 x Transmitter: CWB-4

1 x User manual

Features:

Wireless control, easy to install

Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or OtherAppliances with AC110~240V or DC0~28V.

Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada... and voltage of AC220V (200V~240V), used in UK,

France...

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass

through walls, floors and doors.

With characteristics of reverse power protection and over current protection

Audible / visual indication

Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.

Use ULN2003 to drive relay, with strong anti-interference.

Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.

One/several transmitters can control one/several receivers simultaneously.

If you use two or more receivers in the same place, you can set them with different codes.

Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No.: S4PUA-AC220

Control Mode: Latched, Momentary, Toggle, Momentary + Toggle

Coding Type: Fixed code

Coding Setting: By learning

Power Supply (Operating Voltage):AC100~240V

Working Voltage Range of Relay: AC110~240V or DC0~28V

PCB Size: 137mm x 80mm x 25mm

Case Size: 150mm x 90mm x 45mm

Maximum Working Current: 30A / each channel

Transmitter:

Model No.: 0021095 (CWB-4)

Waterproof

Shell Color: Black

Channel/Button: 4

Button Symbol:A, B, C, D

Operating Voltage: 6V (2 x CR2016 -3V button cell batteries,, can be used for 12 months)

Operating Current: 5mA

Operating Frequency: 315Mhz / 433Mhz

Encoding Chip: PT2260/ PT2262 / PT2264

Encoding Type: Fixed code by soldering, up to 6561 codes

Transmitting Distance: 50m / 150ft (theoretically)

The distance of 50m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be

hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or

may not reach 50m.

Modulation Mode: ASK

Operating Temperature: -20 °C to +70 °C

Unit Size: 56mm x 32mm x 12mm

Weight: 20g

Uses: garage doors, motorcycles, car alarm products, home security products, wireless remote control products, industrial control products.

How to set up the 8-bits code of the transmitter:

1. Open the transmitter shell, then you will see the circuit board. There are two rows pads and one row of chip feet on the back side.

2. The upper row of pads is “H”side, and the lower row of pads is “L”side.

3. If solder the middle row of chip feet to the “L”side, it is code 1. If solder the middle row of chip feet to the “H”side, it is code 2. Don’t solder to

any side, it is code 0.

4. The 8-bits code order is from right to left (from D1 to D8).

5. Here is an example, the 8-bits code in the picture is 00001020, solder as the following way:

6. Code 0: don’t solder any side, like D1, D2, D3, D4, D6, D8.

7. Code 1: solder to the “L”side, like D5.

8. Code 2: solder to the “H”side, like D7.

Usage:

Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as

following operation):

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched (Channel 1~4): Press -> On, other relays Off; Press other button -> Off.

Such as:

Press button 1: Turn on relay 1 (connect A and B, disconnect A and C)

Turn off other relays (disconnect A and B, connect A and C)

Press button 2: Turn on relay 2 (connect A and B, disconnect A and C)

Turn off other relays (disconnect A and B, connect A and C)

Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary (Channel 1~4): Press and hold -> On; Release -> Off.

Such as:

Press and hold button 1: Turn on relay 1 (connect A and B, disconnect A and C)

Release button 1: Turn off relay 1 (disconnect Aand B, connect A and C)

Press and hold button 2: Turn on relay 2 (connect A and B, disconnect A and C)

Release button 2: Turn off relay 2 (disconnect A and B, connect A and C)

Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle (Channel 1~4): Press -> On; Press again -> Off.

Such as:

Press button 1: Turn on relay 1 (connect A and B, disconnect A and C)

Press button 1 again: Turn off relay 1 (disconnect A and B, connect A and C)

Press button 2: Turn on relay 2 (connect A and B, disconnect A and C)

Press button 2 again: Turn off relay 2 (disconnect Aand B, connect A and C)

Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.

Control mode Momentary (Channel 1, 2): Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on relay 1 (connect Aand B, disconnect A and C)

Release button 1: Turn off relay 1 (disconnect A and B, connect A and C)

Press and hold button 2: Turn on relay 2 (connect Aand B, disconnect A and C)

Release button 2: Turn off relay 2 (disconnect A and B, connect A and C)

Control mode Toggle (Channel 3, 4): Press -> On; Press again -> Off.

Press button 3: Turn on relay 3 (connect A and B, disconnect A and C)

Press button 3 again: Turn off relay 3 (disconnect A and B, connect A and C)

Press button 4: Turn on relay 4 (connect A and B, disconnect A and C)

Press button 4 again: Turn off relay 4 (disconnect A and B, connect A and C)

We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote

controls, which are stored in the receiver.

Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored

codes have been deleted successfully.

Learning the button of remote control:

1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.

2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.

3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.

4) The receiver can learn several remote controls with different codes.

Relay 1

Relay 2

Relay 3

Relay 4

Antenna

RF module

Button

Jumper-1

Jumper-2

Signal LED

Power LED

Application Circuit

DC0~28V / AC110~240V

Lamp 1

Lamp 2

Lamp 3

Lamp 4

Power Supply

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mando a distancia de Flying Industry Development

Flying Industry Development

Flying Industry Development S1UD-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development 4S1PFC-AC220+CV-8-3 Manual de usuario

Flying Industry Development

Flying Industry Development 0020703 Manual de usuario

Flying Industry Development

Flying Industry Development 0021112 Manual de usuario

Flying Industry Development

Flying Industry Development 15S1PXB-DC12+1CP-15 Manual de usuario

Flying Industry Development

Flying Industry Development 0020109 Manual de usuario

Flying Industry Development

Flying Industry Development 0020057 Manual de usuario

Flying Industry Development

Flying Industry Development S1DA-DC09 Manual de usuario

Flying Industry Development

Flying Industry Development S1XB-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development 0020386 Manual de usuario

Flying Industry Development

Flying Industry Development S1T-AC110 Manual de usuario

Flying Industry Development

Flying Industry Development S1PF3-DC12 Manual de usuario

Flying Industry Development

Flying Industry Development Z-06 Manual de usuario

Flying Industry Development

Flying Industry Development S1UD-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development S1PX-DC-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development S1X2-DC Manual de usuario

Flying Industry Development

Flying Industry Development S2U-DC06-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development S1PUB-DC09 Manual de usuario

Flying Industry Development

Flying Industry Development S4C-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development 0020080 Manual de usuario

Flying Industry Development

Flying Industry Development S1XB-AC220-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development 0020481 Manual de usuario

Flying Industry Development

Flying Industry Development S1XB-DC06-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development 002028 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación