Flying Industry Development S1PUB-DC09 Manual de usuario

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

RF Wireless Remote Control Radio Controller / Transmitter & Receiver

Package Include:

12 x Receiver: S1PUB-DC09 / S1PUB-DC12 / S1PUB-DC24 (1 Channel / Three Control Modes)

1 x Transmitter: CV-12

1 x User manual

Feature:

Wireless control, easy to install

Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC110~240V or DC0~28V.

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass

through walls, floors and doors.

With characteristics of reverse power protection and over current protection

Audible / visual indication

Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.

Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.

One/ several transmitters can control one/ several receivers simultaneously.

If you use two or more receivers in the same place, you can set them with different codes.

Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No.: S1PUB-DC09 / S1PUB-DC12 / S1PUB-DC24

Channel: 1 CH

Control Mode: Toggle, Momentary, Latched

Coding Type: Learning code

Coding Setting: By learning

Power Supply (Operating Voltage): DC12V±1V (S1PUB-DC12), DC9V±1V (S1PUB-DC09), DC24V±1V (S1PUB-DC24)

Working Voltage Range of Relay: AC110~240V or DC0~28V

PCB size: 74mm x 52mm x 24mm

Case size: 79mm x 58mm x 35mm

Maximum Working Current: 30A

Transmitter:

Model No.: CV-12

Channel: 12 CH

Remote Control Distance: 500m / 1500ft (theoretically)

Encode: Fixed code by soldering

Unit size: 110mm x 50mm x 18mm

Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as

following operation):

Setting control mode Toggle: Only connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on Receiver 1 (connect A and B, disconnect A and C)

Press button 1 again: Turn off Receiver 1 (disconnect A and B, connect A and C)

…

Press button 12: Turn on Receiver 12 (connect A and B, disconnect A and C)

Press button 12 again: Turn off Receiver 12 (disconnect A and B, connect A and C)

Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on Receiver 1 (connect A and B, disconnect A and C)

Release button 1: Turn off Receiver 1 (disconnect A and B, connect A and C)

…

Press and hold button 12: Turn on Receiver 12 (connect A and B, disconnect A and C)

Release button 12: Turn off Receiver 12 (disconnect A and B, connect A and C)

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: Turn on Receiver 1 (connect A and B, disconnect A and C)

Press any other button: Turn off Receiver 1 (disconnect A and B, connect A and C)

…

Press button 12: Turn on Receiver 12 (connect A and B, disconnect A and C)

Press any other button: Turn off Receiver 12 (disconnect A and B, connect A and C)

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of

remote controls, which are stored in the receiver.

Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all

stored codes have been deleted successfully.

LEARNING the remote control:

1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.

2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.

3) Press any button on the transmitter; the receiver will learn the corresponding button on the transmitter.

4) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, it means learning process is

discontinued.

5) The receiver can learn several remote controls with different codes.

Application: For DC motor or lamp

Relay

Application Circuit

A, B=Normally Open; A, C=Normally Closed.

Power supply

DC0~28V / AC110~240V

Lamp

Relay

Power supply

Motor

Antenna

RF module

Jumper-1

Jumper-2

Button

Signal LED

Power LED

Antenna

RF module

Jumper-1

Jumper-2

Button

Signal LED

Power LED

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mando a distancia de Flying Industry Development

Flying Industry Development

Flying Industry Development S1XB-AC220-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development S1PF-DC12 Manual de usuario

Flying Industry Development

Flying Industry Development 0020130 Manual de usuario

Flying Industry Development

Flying Industry Development 00200261 Manual de usuario

Flying Industry Development

Flying Industry Development S1XB-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development 0020057 Manual de usuario

Flying Industry Development

Flying Industry Development Z-06 Manual de usuario

Flying Industry Development

Flying Industry Development 0021112 Manual de usuario

Flying Industry Development

Flying Industry Development S1F2-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development 6S2UB-DC12+1CV-12 Manual de usuario

Flying Industry Development

Flying Industry Development S1PS1-DC06-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development 4S1PFC-AC220+CV-8-3 Manual de usuario

Flying Industry Development

Flying Industry Development 0020167 Manual de usuario

Flying Industry Development

Flying Industry Development 0020080 Manual de usuario

Flying Industry Development

Flying Industry Development 0020210 Manual de usuario

Flying Industry Development

Flying Industry Development 0020386 Manual de usuario

Flying Industry Development

Flying Industry Development 0020481 Manual de usuario

Flying Industry Development

Flying Industry Development S1PF3-DC12 Manual de usuario

Flying Industry Development

Flying Industry Development 0020027 Manual de usuario

Flying Industry Development

Flying Industry Development S1PX-DC-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development 0020794 Manual de usuario

Flying Industry Development

Flying Industry Development S1XB-DC06-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development 3S2UB-DC12+CV-6 Manual de usuario

Flying Industry Development

Flying Industry Development S1UD-DC06 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación