Fluke 17B Manual de usuario

PN 1991246

October 2002 Rev. 4, 1/10

All product names are trademarks of their respective companies.

15B & 17B

Multimeters

Users Manual

LIMITED WARRANTY AND LIMITATION OF LIABILITY

This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This war-

ranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke's behalf. To

obtain service during the warranty period, return the unit to point of purchase with a description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR

PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or countries

do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of

liability may not apply to you.

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Service Center Address:

Fluke Beijing Service Center

Room 401 SCITEC Tower

Jianguomenwai Dajie

Beijing 100004, PRC

Tel: 400.810.3435

Shanghai Shilu Instrument Co., Ltd.

#139, 2638 Nong, Hongmei Nanlu

Shanghai 201108

Biao Zhun Hao: Q/SXAV 1-2002

Table of Contents

Title Page

Introduction .................................................................................................................... 1

Safety Information .......................................................................................................... 1

Safe Working Practices .................................................................................................. 1

Instrument Overview ...................................................................................................... 5

Terminals................................................................................................................... 5

Display....................................................................................................................... 5

Battery Saver ................................................................................................................. 6

Making Measurements ................................................................................................... 6

Manual Ranging and Auto Ranging........................................................................... 6

Data Hold .................................................................................................................. 6

Relative Measurements (17B only)............................................................................ 6

Measuring AC and DC Voltage.................................................................................. 6

Measuring AC or DC Current..................................................................................... 7

Measuring Resistance ............................................................................................... 8

Testing for Continuity................................................................................................. 8

Testing Diodes........................................................................................................... 9

Measuring Capacitance............................................................................................. 9

Measuring Temperature (17B only) ........................................................................... 9

15B & 17B

Users Manual

Measuring Frequency and Duty Cycle (17B only)..................................................... 10

Maintenance .................................................................................................................. 10

General Maintenance................................................................................................ 10

Testing the Fuses...................................................................................................... 10

Replacing the Batteries and Fuses ........................................................................... 11

Service and Parts .......................................................................................................... 11

General Specifications................................................................................................... 12

Accuracy Specifications................................................................................................. 13

15B & 17B

Multimeters

Introduction

XWWarning

To avoid electric shock or personal injury,

read "Safety Information” and “Warning and

Precautions” before using the Meter.

The Fluke Model 15B and Model 17B Multimeters

(hereafter referred to as “the Meter”) are 4,000 count

instruments.

The Meter is battery powered with a digital display.

Except where noted, the descriptions and instructions in

this Users Manual apply to both the Model 15B and

Model 17B Multimeters.

Unless otherwise identified, all illustrations show the

Model 17B.

Safety Information

The Fluke Model 15B and 17B comply with IEC 1010-1

CAT I 1000 V, CAT II 600 V, and CAT III 300 V

overvoltage standards. See Specifications.

Use the Meter only as specified in this manual, otherwise

the protection provided by the Meter may be impaired.

In this manual, a Warning identifies conditions and

actions that pose hazards to the user.

A Caution identifies conditions and actions that may

damage the Meter or the equipment under test.

International symbols used on the Meter and in this

manual are explained in Table 1.

Safe Working Practices

Review the safety information and comply with the safe

working practices on pages 2 and 3.

15B & 17B

Users Manual

XWWarnings and Precautions

To avoid possible electric shock or personal injury, and to avoid possible damage to the Meter or to the

equipment under test, comply with the following practices:

⇒Before using the Meter, inspect the case. Do not use the Meter if it is damaged. Look for cracks or missing plastic. Pay

particular attention to the insulation around the connectors.

⇒Inspect the test leads for damaged insulation or exposed metal. Check the test leads for continuity. Replace damaged

test leads before using the Meter.

⇒Verify a Meter’s operation by measuring a known voltage. Do not use the Meter if it operates abnormally. Protection

may be impaired. When in doubt, have the Meter serviced.

⇒Do not apply more than the rated voltage, as marked on the Meter, between the terminals or between any terminal and

earth ground.

⇒Use caution when working with voltages above 30 V ac rms, 42 V ac peak, or 60 V dc. These voltages pose a shock

hazard.

⇒Use the proper terminals, function, and range for your measurements.

⇒Do not operate the Meter around explosive gas, vapor, or dust.

⇒When using the probes, keep the fingers behind the finger guards.

⇒When making connections, connect the common test lead before connecting the live test lead; when disconnecting,

disconnect the live test lead before disconnecting the common test lead.

⇒Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or

capacitance.

⇒Do not use the Meter in a manner not specified by this manual or the safety features of the Meter may be impaired.

⇒For all dc functions, including manual or auto-ranging, to avoid the risk of shock due to possible improper reading,

verify the presence of any ac voltages by first using the ac function. Then select a dc voltage range equal to or greater

than the ac range.

Multimeters

Safe Working Practices

XW Warnings and Precautions (Continued)

⇒Before measuring current, check the Meter’s fuses (see “Testing the Fuses”) and turn OFF power to the circuit before

connecting the Meter to the circuit.

⇒Do not operate the Meter with the case (or part of the case) removed.

⇒Use only two AA batteries, properly installed in the Meter case, to power the Meter.

⇒Replace the battery as soon as the battery indicator (M) appears. With a low battery, the Meter might produce false

readings that can lead to electric shock and personal injury.

⇒Do not measure voltages above 600 V in Category II, or 300 V in Category III installations.

⇒When in REL mode the Δsymbol is displayed. Caution must be used because hazardous voltage may be present.

⇒Remove test leads from the Meter before opening the Meter case or battery door.

⇒When servicing the Meter, use only specified replacement parts.

15B & 17B

Users Manual

Table 1. International Electrical Symbols

BAC (Alternating Current) JEarth Ground

FDC (Direct Current) IFuse

CAC or DC TDouble Insulated

WSafety Information XShock Hazard

MBattery PComplies with EU directives

GDiode ECapacitance

CAT II

IEC Measurement Category II – CAT

II equipment is designed to protect

against transients from energy-

consuming equipment supplied from

the fixed installation, such as TVs,

PCs, portable tools, and other

household circuits.

CAT III

IEC Measurement Category III – CAT III

equipment is designed to protect against

transients in equipment in fixed

equipment installations, such as

distribution panels, feeders and short

branch circuits, and lighting systems in

large buildings.

~Do not dispose of this product as unsorted municipal waste. Go to Fluke’s website for recycling

information.

Multimeters

Instrument Overview

Terminals

COM

mA A V

400mA

FUSED

10A

FUSED

CAT I 1000 V

CAT II 600 V

apg1f.eps

Item Description

1 Input terminal for AC and DC current

measurements to 10A and frequency (17B

only) measurements.

2 Input terminal for AC and DC microamp and

milliamp measurements to 400 mA and

frequency (17B only) measurements.

3 Common (return) terminal for all

measurements.

4 Input terminal for voltage, resistance,

continuity, diode, capacitance, frequency

(17B only) and temperature (17B only)

measurements.

Display

345

apg2f.eps

Item Description

1 Relative mode is active

2 Continuity selected

3 Display Hold is enabled

4 Temperature is selected

5 Duty Cycle is selected

6 Diode test is selected

7 F– Farads for capacitance

8 A, V – amps or volts

9 DC, AC – dc or ac voltage or current

10 Hz – Frequency is selected

11 O– Ohms is selected

12 m, M, k – decimal prefix

13 Auto range selected

14 Battery is low and should be changed

15B & 17B

Users Manual

Battery Saver

The Meter enters the “Sleep mode” and blanks the display

if the Meter is not used and the input is inactive for 30

minutes. Press any button or turn the rotary switch to

wake the Meter up. To disable the Sleep mode, hold down

the YELLOW button while turning the Meter on.

Making Measurements

Manual Ranging and Auto Ranging

The Meter has both manual and auto range options. In the

auto range mode, the Meter selects the best range for the

input detected. This allows you to switch test points

without having to reset the range. You can override auto

ranging by selecting the range manually.

The Meter defaults to the auto range mode in

measurement functions that have more than one range.

When the Meter is in the auto range mode, Auto Range is

displayed.

To enter and exit the manual range mode:

1. Press

Each press of Rincrements the range. When the

highest range is reached, the Meter wraps to the

lowest range.

2. To exit the manual range mode, press and hold R

for two seconds.

XW Warning

Dangerous voltages may be present at the

input terminals and may not be displayed.

Data Hold

To hold the present reading, press H. Press Hagain

to resume normal operation.

Relative Measurements (17B only)

The Meter will display relative measurements in all

functions except frequency.

1. With the Meter in the desired function, touch the test

leads to the circuit on which you want future

measurements to be based.

2. Press

rto store the measured value as the

reference value and activate the relative

measurement mode. The difference between the

reference value and subsequent reading is displayed.

3. Press

rfor more than 2 seconds to return the

Meter to normal operation.

Measuring AC and DC Voltage

To minimize improper reading of an unknown voltage

containing either ac or ac + dc voltage components, first

select the ac voltage function on the meter making

particular note of the ac range required for a good

measurement. Next manually select the dc function with

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Multímetro de Fluke

Fluke

Fluke 175 Manual de uso y cuidado

Fluke

Fluke 27 Manual de usuario

Fluke

Fluke 287 Manual de usuario

Fluke

Fluke 8508A Manual de usuario

Fluke

Fluke 80 Series V Manual de usuario

Fluke

Fluke LinkRunner Pro LRPRO-1000 Manual de usuario

Fluke

Fluke 114 Manual de usuario

Fluke

Fluke 805 Manual de usuario

Fluke

Fluke 27-II Manual de uso y cuidado

Fluke

Fluke 373 Manual de uso y cuidado

Fluke

Fluke III Series Manual de usuario

Fluke

Fluke 8588A Manual de usuario

Fluke

Fluke 8840A Manual de usuario

Fluke

Fluke 110 Manual de usuario

Fluke

Fluke 233 Manual de usuario

Fluke

Fluke 27-II Manual de usuario

Fluke

Fluke 8845A Manual de operación y mantenimiento

Fluke

Fluke 12E Manual de usuario

Fluke

Fluke 1630 Manual de instrucciones

Fluke

Fluke 1550B Manual de instrucciones

Fluke

Fluke III Series Manual de usuario

Fluke

Fluke 79 III Manual de uso y cuidado

Fluke

Fluke 28IIEX Manual de usuario

Fluke

Fluke 8808A Manual de lista de piezas

Manuales populares de Multímetro de otras marcas

Agilent Technologies

Agilent Technologies 34420A Manual de usuario

Hameg

Hameg HM 8012 Manual de usuario

Mastech

Mastech MY70 Manual de usuario

Steren

Steren MUL-300 Manual de usuario

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manual de usuario

PeakTech

PeakTech 4000 Manual de uso y cuidado

YOKOGAWA

YOKOGAWA 90050B Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manual de usuario

Tempo Communications

Tempo Communications MM200 Manual de usuario

Elenco Electronics

Elenco Electronics CM-1555 Manual de usuario

Mastech

Mastech MS8238C Manual de usuario

SDAR

SDAR 830A, 830B, 830D, 830C Manual de usuario

RS PRO

RS PRO RS-9519BT Manual de usuario

BGS technic

BGS technic 8890 Manual de usuario

Amprobe

Amprobe Hexagon 60 Manual de usuario

Morris

Morris 57074 Manual de usuario

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter Manual de usuario