Amprobe Hexagon 60 Manual de usuario

Hexagon 60

Digital Multimeter

Users Manual

04/2013, RevA

English

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and

workmanship for one year from the date of purchase, unless

local laws require otherwise. This warranty does not cover fuses,

disposable batteries or damage from accident, neglect, misuse,

alteration, contamination, or abnormal conditions of operation

or handling. Resellers are not authorized to extend any other

warranty on Amprobe’s behalf. To obtain service during the

warranty period, return the product with proof of purchase to an

authorized Amprobe Service Center or to an Amprobe dealer or

distributor. See Repair Section for details. THIS WARRANTY IS YOUR

ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS,

IMPLIED OR STAUTORY - INCLUDING IMPLIED WARRANTIES OF

FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE

HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE

FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY.

Since some states or countries do not allow the exclusion or

limitation of an implied warranty or of incidental or consequential

damages, this limitation of liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or

for calibration should be accompanied by the following: your

name, company’s name, address, telephone number, and proof of

purchase. Additionally, please include a brief description of the

problem or the service requested and include the test leads with

the meter. Non-warranty repair or replacement charges should be

remitted in the form of a check, a money order, credit card with

expiration date, or a purchase order made payable to Amprobe®.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before

requesting repair. During the warranty period any defective

test tool can be returned to your Amprobe® distributor for an

exchange for the same or like product. Please check the “Where to

Buy” section on www.amprobe.com for a list of distributors near

you. Additionally, in the United States and Canada In-Warranty

repair and replacement units can also be sent to a Amprobe®

Service Center (see address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be

sent to an Amprobe® Service Center. Call Amprobe® or inquire at

your point of purchase for current repair and replacement rates.

In USA: In Canada:

Amprobe Amprobe

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe®

distributor for a nominal charge. Please check the “Where to Buy”

section on www.amprobe.com for a list of distributors near you.

European Correspondence Address*

Amprobe® Europe

Beha-Amprobe GmbH

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

www.amprobe.eu

*(Correspondence only – no repair or replacement available from

this address. European customers please contact your distributor.)

Hexagon 60 Digital Multimeter

1LCD Display

2SELECT Button

3DATA HOLD Button

4Rotary Switch

5Input Terminal for voltage, diode, resistance and

continuity measurement

6Input Terminal for battery test and AC/DC mA or μA

measurement

7Input Terminal for AC/DC A measurement to10A

8COM (return) terminal for all measurements

1The Meter selects the range with best resolution

2Direct Current

3Alternate Current

4Negative reading

5Data hold

6Diode test

7Continuity test

8Measurement units for resistance test

9Measurement units for voltage test

10 Measurement units for current test

11 Low battery indicator

12 Battery Test

Screen Display

1 6 7

CONTENTS

SYMBOLS............................................................................ 2

SAFETY INFORMATION ...................................................... 2

UNPACKING AND INSPECTION .......................................... 4

FEATURES............................................................................ 4

MAKING MEASUREMENT .................................................. 5

Rotary Switch Positions.................................................. 5

SELECT Button ................................................................ 6

DATA HOLD Button........................................................ 6

Auto Power OFF ............................................................. 6

Measuring AC and DC Voltage...................................... 6

Measuring Resistance .................................................... 7

Measuring Continuity .................................................... 7

Measuring Diode............................................................ 8

Battery Test..................................................................... 8

Measuring AC and DC Current...................................... 9

SPECIFICATION.................................................................... 10

MAINTENANCE AND REPAIR ............................................. 14

BATTERY AND FUSE REPLACEMENT.................................. 15

SYMBOLS

Caution ! Risk of electric shock.

Caution! Refer to the explanation in this Manual

Alternating Current (AC)

Direct Current (DC)

The equipment is protected by double insulation

or reinforced insulation

Earth (Ground)

Audible tone

Battery

Complies with European Directives

Conforms to relevant Australian standards

Do not dispose of this product as unsorted

municipal waste. Contact a qualiﬁed recycler.



SAFETY INFORMATION

The Meter complies with:

IEC/EN 61010-1 3rd Edition to Category III 600 Volts,

Pollution degree 2

IEC/EN 61010-2-030

IEC/EN 61010-2-31 for test leads

EMC IEC/EN 61326-1

Measurement Category III (CAT III) is for measurements

performed in the building installation. Examples are

measurements on distribution boards, circuit- breakers,

wiring, including cables, bus-bars, junction boxes,

switches, socket-outlets in the ﬁxed installation, and

equipment for industrial use and some other equipment,

for example, stationary motors with permanent

connection to the ﬁxed installation.

CENELEC Directives

The instruments conform to CENELEC Low-voltage

directive 2006/95/EC and Electromagnetic compatibility

directive 2004/108/EC

Warning:ReadBeforeUsing

•Toavoidpossibleelectricalshockorpersonalinjury,

followtheseinstructionsandusetheMeteronlyas

speciﬁed in this manual.

•DonotusetheMeterortestleadsiftheyappear

damaged,oriftheMeterisnotoperatingproperly.

If in doubt, have the Meter serviced.

•Alwaysusetheproperfunctionandrangefor

measurements.

•Beforerotatingthefunctionrangeselectionswitch,

disconnect test probe from circuit under test.

•VerifytheMeter’soperationbymeasuringona

known voltage source.

•Donotapplymorethantheratedvoltage,as

marked on the Meter, between the test probe or

betweenanytestprobeandearthground.

•UsetheMeterwithcautionforvoltagesabove30

Vacrms,42Vacpeak,or60Vdc.Thesevoltagespose

electrical shock hazards.

•Disconnectcircuitpoweranddischargeallhigh-

voltage capacitors before testing resistance.

•DonotusetheMeteraroundexplosivegasorvapor.

•Whenusingthetestleads,keepyourngersbehind

the ﬁnger guards.

•RemovetestleadsfromtheMeterbeforeopening

theMetercaseorbatterydoor.

•ifthemeterisusedinamannernotspeciedin

theusersmanual,theprotectionprovidedbythe

equipmentmaybeimpaired

UNPACKING AND INSPECTION

Your shipping carton should include:

1 Hexagon 60 Multimeter

1 Pair of test leads

2 1.5V alkaline AAA battery (installed)

1 Users manual

If any of the items are damaged or missing, return

the complete package to the place of purchase for an

exchange.

FEATURES

Easy to use digital multimeter designed for the

homeowner or DIY enthusiast. Install, troubleshoot or

repair light ﬁxtures, fans, appliances, or automotive

electrical problems with easy and safety of a CAT III 600V

rated product. Check for voltage in electrical sockets,

extension cords, batteries and other electrical circuits. Let

the power of a professional Amprobe multimeter keep

you safe and help you solve all your electrical challenges.

•Measurements:Voltageupto600VAC/DC,AC/DC

Current and Resistance

•Audiblecontinuity

•DiodeTest

•Datahold

•Autopoweroff

•Lowbatterywarning

•Safety:CATIII600V

MAKING MEASUREMENT



1. Use the proper function and range for

measurements.

2. To avoid possible electrical shock, personal injury or

damages to the Meter, disconnect circuit power and

discharge all high-voltage capacitors before testing

resistance and diode.

3. Connecting test leads:

  •Connectthecommon(COM)testleadtothecircuit

before connecting the live lead.

  •Aftermeasurement,removeliveleadbefore

removing the common (COM) test lead from the

circuit.

4. Symbol “OL” is displayed on LCD when the

measurement is out of range.

Rotary Switch Positions

Switch Position Measurement Function

AC or DC voltage measurement (use

SELECT button for switching to AC

or DC).

Resistance measurement

Voltage measurement of diode PN

junction

Continuity measurement

9V For measurement of dry batteries of

not exceeding 15Vdc

1.5V For measurement of dry batteries of

not exceeding 2Vdc

μA mA A

AC or DC current measurement (use

SELECT button for switching to AC

or DC).

Tabla de contenidos

Otros manuales de Multímetro de Amprobe

Amprobe

Amprobe AMP-210 Manual de usuario

Amprobe

Amprobe 38XR-A Manual de usuario

Amprobe

Amprobe AM-530 Manual de usuario

Amprobe

Amprobe AC71B Manual de usuario

Amprobe

Amprobe ACDC-400 Manual de usuario

Amprobe

Amprobe PXP-A Manual de usuario

Amprobe

Amprobe ACD-14 PLUS Manual de usuario

Amprobe

Amprobe KWC-2000 Manual de usuario

Amprobe

Amprobe AM-140-A Manual de usuario

Amprobe

Amprobe 33XR-A Manual de usuario

Amprobe

Amprobe ACDC-100 TRMS Manual de usuario

Amprobe

Amprobe ACD-10 TRMS-PLUS Manual de usuario

Amprobe

Amprobe AM-120 TRMS Manual de usuario

Amprobe

Amprobe ac68C Manual de usuario

Amprobe

Amprobe HD160C Manual de usuario

Amprobe

Amprobe PM51A Manual de usuario

Amprobe

Amprobe AM555 Manual de usuario

Amprobe

Amprobe AM-250 Manual de usuario

Amprobe

Amprobe AD40B Instrucciones de funcionamiento

Amprobe

Amprobe AM-4B Manual de usuario

Amprobe

Amprobe AM-500 Manual de usuario

Amprobe

Amprobe AM-52 Manual de usuario

Amprobe

Amprobe ACD-15 Pro Manual de usuario

Amprobe

Amprobe AM-100 Manual de usuario

Manuales populares de Multímetro de otras marcas

Agilent Technologies

Agilent Technologies 34420A Manual de usuario

Fluke

Fluke 83 Manual de usuario

Hameg

Hameg HM 8012 Manual de usuario

Mastech

Mastech MY70 Manual de usuario

Steren

Steren MUL-300 Manual de usuario

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manual de usuario

PeakTech

PeakTech 4000 Manual de uso y cuidado

YOKOGAWA

YOKOGAWA 90050B Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manual de usuario

Fluke

Fluke 8846A Manual de operación y mantenimiento

Tempo Communications

Tempo Communications MM200 Manual de usuario

Elenco Electronics

Elenco Electronics CM-1555 Manual de usuario

Mastech

Mastech MS8238C Manual de usuario

SDAR

SDAR 830A, 830B, 830D, 830C Manual de usuario

RS PRO

RS PRO RS-9519BT Manual de usuario

BGS technic

BGS technic 8890 Manual de usuario

Morris

Morris 57074 Manual de usuario