FLIR MR59 Manual de usuario
Quick Start
Ball Probe Moisture Meter
with Bluetooth®
Model MR59
Quick Start
INTRODUCTION
To obtain the detailed User Manual please visit http://support.flir.
com (download tab). Please read the user manual carefully before
use. The MR59 includes a 3-year limited warranty, visit www.flir.
com/testwarranty to read the warranty document and to register
your product.
QUICK STEPS
1. Ensure that a 9V battery is installed in the meter’s rear
compartment.
2. Long press the power button to switch the meter ON. The
meter will display ‘CAL’ while it performs a ZERO calibration
(keep hands and objects away from sensor during this
calibration).
3. The meter automatically switches OFF after 30 minutes (APO).
4. Place the ball sensor on the surface of the material under test.
The sensitivity of the sensor is uniform across its entire surface.
The sensor can detect moisture to a depth of 4 in (100 mm)
maximum.
5. Read the moisture level in %on the meter display. Take read-
ings in several locations for the best representation of the mois-
ture present.
6. Note the MAX and MIN moisture readings on the display. Long
press the CLEAR button to reset the MAX/MIN readings.
7. Long press the button to switch the meter’s backlight ON/
OFF.
8. Long press the button to switch the meter’s Work Light ON/
OFF.
9. To freeze/unfreeze a displayed reading, short press the HOLD
button.
10. The MR59 beeps when the moisture reading exceeds the high
alarm limit. To set the alarm limit, short press the SET button,
and then use the up /down arrows to set the value (press SET
again to exit). To enable/disable the alarm, long press the SET
button. When the alarm is enabled (default), the alarm bell icon
appears.
11. Refer to the Bluetooth section below, and the separate user
manual, for information on transmitting readings to a remote
device.
#NAS100096; r. AB/80574/80853; en-US 1
METER DESCRIPTION
1. Moisture sensor
2. Backlit LCD
3. Data Hold/MIN-MAX clear
4. Worklight ON/OFF and up arrow button
5. Backlight ON/OFF and down arrow button
6. Power button
7. Alarm SET/Alarm limit button
8. Work light
9. Tripod mount
10. Battery compartment
#NAS100096; r. AB/80574/80853; en-US 2
FUNCTION BUTTONS
Long press to power the meter ON/OFF
CLEAR
HOLD
Long press to clear MIN/MAX memories
Short press to access/exit Data Hold mode
SET
Long press to enable/disable the audible Alarm
Short press SET to access/exit the alarm threshold screen (use
the arrow buttons to change the threshold value)
In Alarm limit mode, increase the moisture alarm threshold
In Alarm limit mode, decrease the moisture alarm threshold
Long press to switch work light ON/OFF
Long press to the switch display backlight ON/OFF
DISPLAY DESCRIPTION
1. Bluetooth (BLE) icon (when connected)
2. Transmit icon (when connected)
3. Data Hold icon
4. Alarm enabled icon
5. Battery status icon
6. Maximum reading
7. Minimum reading
8. Moisture reading
#NAS100096; r. AB/80574/80853; en-US 3
BLUETOOTH COMMUNICATION
To connect to a remote device running FLIR Tools™, turn on the re-
mote device and start the FLIR Tools application. Open Instruments,
and search for the MR59 (the MR59 must be ON). Tap to connect
to the MR59. When connected to a device running the FLIR Tools
mobile app, the MR59 (using the METERLiNK®protocol) continu-
ally sends readings for live display on the remote device.
When connected to a compatible FLIR camera that supports BLE
(Bluetooth Low Energy), the MR59 continually sends meter read-
ings for live display on the camera screen. Download the FLIR Tools
mobile app from the Google Play™ store, the Apple App store, or
here:
https://www.flir.com/products/flir-tools-app/
1. When successful communication between the meter and a re-
mote device or FLIR camera is established, the Bluetooth icon
and the transmission icon appear on the meter display.
2. Refer to the FLIR Tools help utility in the mobile app for detailed
information regarding FLIR Tools.
Customer Support
Customer Support Telephone List: https://support.flir.com/contact
Repair, Calibration, and Technical Support https://support.flir.com
Three-Year Limited Warranty
This product is protected by FLIR’s 3-Year Limited Warranty. Visit
www.flir.com/testwarranty to read the 3-Year Limited Warranty
document.
#NAS100096; r. AB/80574/80853; en-US 4
#NAS100096; r. AB/80574/80853; en-US 5
last page
Publ. No.: NAS100096
Release: AB
Commit: 80574
Head: 80853
Language: en-US
Modified: 2021-10-31
Formatted: 2021-11-11
Website
http://www.flir.com
Customer support
http://support.flir.com
Copyright
© 2021, FLIR Systems, Inc. All rights reserved worldwide.
Disclaimer
Specifications subject to change without further notice. Models and accessories
subject to regional market considerations. License procedures may apply.
Products described herein may be subject to US Export Regulations. Please
Quick Start
Otros manuales para MR59
2
Tabla de contenidos
Otros manuales de Instrumento de medición de FLIR
FLIR
FLIR Extech Instruments EX840 Manual de usuario
FLIR
FLIR Extech EX612 Manual de usuario
FLIR
FLIR VS80 KIT Manual de usuario
FLIR
FLIR CM72 Manual de usuario
FLIR
FLIR EXTECH HDV-WTX2 Dimensiones
FLIR
FLIR DM284 Manual de usuario
FLIR
FLIR TA72 Manual de usuario
FLIR
FLIR CM174 C Manual de usuario
FLIR
FLIR Extech Instruments HDV-WTX2 Manual de usuario
FLIR
FLIR MR160 Manual de usuario
FLIR
FLIR EXTECH HDV-TX1 Dimensiones
FLIR
FLIR MSX MR277 Manual de usuario
FLIR
FLIR VS80A2-45-1RM Manual de usuario
FLIR
FLIR SV87-KIT Manual de usuario
FLIR
FLIR CM55 Manual de usuario
FLIR
FLIR CM174 Manual de usuario
FLIR
FLIR Extech Instruments Oyster-10 Manual de usuario
FLIR
FLIR MR55 Manual de usuario
FLIR
FLIR ME13552 Manual de usuario
FLIR
FLIR EXTECH RH520 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario