Festo CPX-FVDA-P2 Manual de usuario

Description

Output module

CPX-FVDA-P2

with

connection block

CPX-M-AB-4-M12X2

-5POL

CPX-AB-8-KL-4POL

and

interlinking block

CPX-M-GE-EV-FV

8022607

en 2018-02a

[8063230]

Terminal CPX

Output module CPX-FVDA-P2

Contents and general instructions

Festo P.BE-CPX-FVDA-P2-EN en 2018-02a English

Translation of the original instructions

Original de.......................................

Version en 2018-02a................................

Designation P.BE-CPX-FVDA-P2-EN....................

Order no. 8022607.................................

 (Festo AG & Co. KG, Ruiter Straße 82, 73734 Esslingen, Germany, 2018)

Internet:http://www.festo.com

E-mail: service_international@festo.com

The reproduction, distribution and utilisation of this docu

ment, as well as the communication of its contents to others

without explicit authorisation, is prohibited. Offenders will

be held liable for damages. All rights are reserved, in partic

ular the right to file patent, utility model or registered

design applications.

Contents and general instructions

II Festo P.BE-CPX-FVDA-P2-EN en 2018-02a English

PROFINET IO®, PROFIBUS®are registered trademarks of the respective trademark

owners in specific countries.

Contents and general instructions

III

Festo P.BE-CPX-FVDA-P2-EN en 2018-02a English

Contents

Important user information VI..............................................

General safety instructions VIII...............................................

Intended use IX..........................................................

Rules for product configuration X...........................................

Foreseeable misuse XIII.....................................................

Attainable safety level XV...................................................

Failures due to a common cause (Common Cause Failure – CCF) XV................

Requirements for product use XVI............................................

Transport and storage conditions XVIII.........................................

Service XVIII...............................................................

Range of applications and certifications XVIII....................................

Product identification XX...................................................

Information regarding this description XXIII.....................................

Product-specific terms and abbreviations XXIV...................................

1. System overview CPX-FVDA-P2 1-1...................................

1.1 CPX terminal with output module CPX-FVDA-P2 1-3......................

1.1.1 Design of the output module CPX-FVDA-P2 1-7...................

1.1.2 Supported CPX product versions 1-11...........................

1.1.3 Required bus topology (control chain) 1-13.......................

1.2 PROFIsafe 1-14.....................................................

1.2.1 PROFIsafe safety profile 1-14..................................

1.2.2 Process image 1-15..........................................

1.2.3 Bit pattern of the output and input data (F-user data) 1-16..........

1.3 Mode of operation of the output module 1-22............................

1.3.1 Application ranges 1-23.......................................

1.3.2 Application examples 1-27....................................

1.4 Requirements for actuators (CH0 ... CH2) 1-41............................

1.4.1 Electrical requirements 1-41...................................

1.4.2 Safety-related requirements 1-43...............................

Contents and general instructions

IV Festo P.BE-CPX-FVDA-P2-EN en 2018-02a English

2. Installation 2-1...................................................

2.1 General installation instructions 2-3...................................

2.2 Connecting the cables and plugs to the connection block 2-5..............

2.3 Electrical connection and display components 2-7.......................

2.3.1 Pin allocation with M12 connection block 2-8....................

2.3.2 Pin allocation with terminal strip connection block 2-9.............

2.4 Set PROFIsafe address 2-10...........................................

2.5 Dismounting and mounting the electronics module 2-13...................

2.5.1 Dismounting the electronics module 2-14........................

2.5.2 Mounting the electronics module 2-15...........................

3. Commissioning 3-1................................................

3.1 General instructions 3-3.............................................

3.1.1 Device master file (GSD/GSDML) 3-3...........................

3.2 Preparing for commissioning 3-5......................................

3.3 Commissioning steps 3-6............................................

3.4 Setting the PROFIsafe parameters 3-7.................................

3.5 Setting the CPX module parameters 3-9................................

3.5.1 CPX module parameters CPX-FVDA-P2 in detail 3-10...............

3.5.2 Parameterisation and signal display

with the operator unit CPX-MMI-1 3-14..........................

3.6 Configuration with Siemens STEP 7 (example) 3-16........................

3.6.1 Addressing example 3-20.....................................

4. Operation 4-1.....................................................

4.1 LED status indication 4-3............................................

4.1.1 Behaviour during the start-up phase 4-4........................

4.1.2 Normal operating status 4-4..................................

Contents and general instructions

Festo P.BE-CPX-FVDA-P2-EN en 2018-02a English

5. Diagnosis and error handling 5-1....................................

5.1 Summary of diagnostics options 5-3...................................

5.2 Possible error messages of the output module CPX-FVDA-P2 5-4...........

5.3 Diagnostics via LEDs 5-6............................................

5.3.1 Error handling and parameterisation 5-9........................

5.3.2 Behaviour in case of error 5-11.................................

5.4 Diagnostics via the CPX bus node 5-12..................................

5.4.1 Diagnostics with the operator unit CPX-MMI 5-12..................

6. Service, repair, disposal 6-1.........................................

6.1 Maintenance 6-3...................................................

6.2 Repair 6-3........................................................

6.3 Disposal 6-4......................................................

A. Technical appendix A-1.............................................

A.1 Technical data of the output module CPX-FVDA-P2 A-3....................

A.2 Technical data of the connection blocks A-9.............................

A.3 Technical data of the interlinking block A-10.............................

B. Index B-1.........................................................

B.1 Index C-3.........................................................

Contents and general instructions

VI Festo P.BE-CPX-FVDA-P2-EN en 2018-02a English

Important user information

Danger categories

This description includes instructions on the possible dangers

that can occur if the product is used incorrectly. These notes

are marked with a signal word (Warning, Caution, etc), prin

ted on a shaded background and marked additionally with a

pictogram. A distinction is made between the following

danger warnings:

Warning

... means that non-observance can result in serious per

sonal injury or damage to property.

Caution

... means that injury to people and damage to property can

occur if this warning is not observed.

Note

... means that damage to property can occur if this warning

is not observed.

In addition, the following pictogram marks passages in the

text that describe activities involving electrostatically sensit

ive devices:

Electrostatically sensitive devices: incorrect handling can

cause damage to devices.

Contents and general instructions

VII

Festo P.BE-CPX-FVDA-P2-EN en 2018-02a English

Marking of special information

The following pictograms mark passages in the text that con

tain special information.

Pictograms

Information:

Recommendations, tips and references to other information

sources.

Accessories:

Information about necessary or useful accessories for the

Festo product.

Environment:

Information about environmentally friendly use of Festo

products.

Text symbols and markers

Bullet points denote activities that can be carried out in

any order.

1. Numbers indicate activities that must be carried out in the

specified sequence.

– Arrowheads indicate general lists.

Contents and general instructions

VIII Festo P.BE-CPX-FVDA-P2-EN en 2018-02a English

General safety instructions

Warning

Disregarding the safety instructions can result in death,

serious injuries or major material damage.

The safety instructions must be observed.

Note

Electronics modules include electrostatically sensitive

devices.

Observe the handling specifications for electrostatically

sensitive devices.

Discharge static electricity from your body before as

sembling or disassembling modules to protect the mod

ules.

Note

To ensure compliance with the intended use:

Each output channel that is in use must be switched at

least once a week.

If test pulses are switched off: each output that is in use

must be switched at least once a day.

Note

To ensure compliance with the safety level:

Each output channel that is in use must be switched on

for more than 1 minute at least once every 8 operating

hours.

The operating time begins when the output module is

first switched on.

Otros manuales para CPX-FVDA-P2

Tabla de contenidos

Otros manuales de Unidad de control de Festo

Festo

Festo CPX-E-PN Manual de usuario

Festo

Festo CPE Series Manual de usuario

Festo

Festo HSP-AE-IO Series Guía de referencia

Festo

Festo CPX-4AE-4AA-H Manual de usuario

Festo

Festo CPX-E-PB Manual de usuario

Festo

Festo DLP-VSE-x-ASI eries Manual de usuario

Festo

Festo CDVI5.0 Manual de usuario

Festo

Festo CPX-SF34 Manual de usuario

Festo

Festo VAEM-S6-S-FAS-4-4E Manual de usuario

Festo

Festo MS6-SV Series Manual de usuario

Festo

Festo CPX-FB23 Instrucciones de funcionamiento e instalación

Festo

Festo EHMB Series Manual de usuario

Festo

Festo CPX-CMIX-M1-1 Manual de usuario

Festo

Festo HMP B Z Series Manual de usuario

Festo

Festo CMGA-E1 Manual de usuario

Festo

Festo CPE-10-PRS series Manual de usuario

Festo

Festo CPVSC1-M1H-D-H-M5C Manual de usuario

Festo

Festo MS6-SV Series Manual de usuario

Festo

Festo CPX-...DE Series Manual de usuario

Festo

Festo CP-FB8 Manual de lista de piezas

Festo

Festo VIA 03-FB Series Manual de lista de piezas

Festo

Festo ERMB Series Manual de usuario

Festo

Festo CMGA-E1-CO Manual de usuario

Festo

Festo MPYE-5-***-B series Manual de usuario

Manuales populares de Unidad de control de otras marcas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario

Flyron

Flyron FN-BC04 Manual de usuario