Extreme Networks Summit 200-24 Manual

Extreme Networks, Inc.

3585 Monroe Street

Santa Clara, California 95051

(888) 257-3000

http://www.extremenetworks.com

Consolidated “e” Series

Hardware Installation Guide

Published: September 22, 2004

Part number: 123010-00 Rev 01

Alpine, Altitude, BlackDiamond, EPICenter, Ethernet Everywhere, Extreme Ethernet Everywhere, Extreme Networks,

Extreme Turbodrive, Extreme Velocity, ExtremeWare, ExtremeWorks, GlobalPx Content Director, the Go Purple Extreme

Solution Partners Logo, ServiceWatch, Summit, the Summit7i Logo, and the Color Purple, among others, are trademarks

or registered trademarks of Extreme Networks, Inc. or its subsidiaries in the United States and other countries. Other

names and marks may be the property of their respective owners.

Specifications are subject to change without notice.

For safety compliance information, see Appendix A.

uthors: Jeanine Healy, Richard Small

roduction: Jeanine Healy

Consolidated "e" Series Hardware Installation Guide 3

Contents

Preface

Introduction 7

Conventions 8

Related Publications 8

About This Guide 9

How To Use This Guide 9

Part 1 Preparing for Installation

Chapter 1 Overview of the “e” Series of Switches

Summit “e” Series and Models 13

Summit 200 Features 13

Summit 300 Features 15

Summit 400 Features 16

Port Connections 18

Following Safety Information 18

Software Images 19

Full-Duplex Support 19

Chapter 2 Site Preparation

Planning Your Site 22

Step 1: Meeting Site Requirements 22

Step 2: Evaluating and Meeting Cable Requirements 22

Step 3: Evaluating and Meeting Mini-GBIC Requirements 22

Step 4: Meeting Power Requirements 22

Meeting Site Requirements 22

Operating Environment Requirements 22

4Consolidated "e" Series Hardware Installation Guide

Rack Specifications and Recommendations 25

Evaluating and Meeting Cable Requirements 27

Cabling Standards 27

Cable Labeling and Record Keeping 28

Installing Cable 28

Evaluating and Meeting Mini-GBIC Requirements 31

Mini-GBIC Types and Specifications 31

Long Range Mini-GBIC System Budgets 32

RJ-45 Connector Jackets 33

Radio Frequency Interference 34

Making Network Interface Cable Connections 34

Meeting Power Requirements 34

Power Supply Requirements 35

AC Power Cable Requirements 35

Uninterruptable Power Supply Requirements 36

Applicable Industry Standards 37

Part 2 Switch Overview

Chapter 3 Summit 200 Series Switch Overview

Summit 200 Series Switches 41

Summit 200 Switch Front View 41

Summit 200 Switch Rear View 42

Summit 200 Switch LEDs 43

Console Port 44

Port Connections 44

Summit 200 Automatic Failover 44

Full-Duplex 46

Chapter 4 Summit 300 Switch Overview

Summit 300 Series Switches 47

Summit 300-24 Switch 47

Summit 300-24 Front View 47

Summit 300-24 Switch LEDs 48

Summit 300-48 switchConsole Port 49

Port Connections 49

Summit 300-24 RearSummit 300-48 switch View 50

Redundant Power Supply 51

Summit 300-48 Switch 51

Summit 300-48 Front View 51

LED Behavior 52

Consolidated "e" Series Hardware Installation Guide 5

Console Port 53

Port Connections 53

Summit 300 Automatic Failover 53

Summit 300-48 Rear View 54

Load Sharing Power Supplies 55

Chapter 5 Summit 400-48t Switch Overview

Summit 400-48t Switch 57

Summit 400 Front View 57

Summit 400 Rear View 58

Summit 400 Switch LEDs 59

Port Connections 61

Uplink Redundancy 61

Part 3 Switch Installation

Chapter 6 “e” Switch Installation

Installing the Switch 65

Rack Mounting 66

Removing the Switch from a Rack 67

Free-Standing 67

Desktop Mounting of Multiple Switches 67

Installing or Replacing a Mini-Gigabit Interface Connector (Mini-GBIC) 67

Removing and Inserting a Mini-GBIC 68

Connecting Equipment to the Console Port 69

Powering On the SwitchSummit 300-48 switch 70

Checking the InstallationSummit 300-48 switch 70

Logging In for the First Time 71

Part 4 Accessory Installation

Chapter 7 Summit 300 Optional Features

External Power Supply (45019) 75

Rack-mounting the EPS-LD unit 76

Connecting the EPS-LD unit 77

Removing an EPS-LD unit 79

Internal 600 Watt Power Supply (15412) 79

Removing and Installing Summit 300-48 Power Supplies 80

Installing and Removing Power Cable Retaining Brackets 82

Removing the Power Cable Retaining Bracket 84

6Consolidated "e" Series Hardware Installation Guide

Internal Power Supply Technical Specifications 84

LED Visual Indicators 84

Environmental and Safety Specifications 86

Chapter 8 Summit 400-48t Optional Features

Installing Optional Features 89

Installing the Summit XEN Card 89

Installing the External Power System 91

Rack Mounting the EPS-T 92

Adding a second EPS-160 to the EPS-T 94

Removing an EPS-160 from the EPS-T 95

Part 5 Appendixes

Appendix A Safety Information

Important Safety Information 99

Power 99

Power Cable 100

Optical Safety 100

Lithium Battery 101

Appendix B “e” Series Technical Specifications

Common Switch Specifications 103

Summit 200 Series Switch Specifications 105

Summit 300 Series Switch Specifications 106

Summit 400 Series Switch Specifications 107

Index

Consolidated "e" Series Hardware Installation Guide 7

Preface

This preface provides an overview of this guide, describes guide conventions, and lists other

publications that might be useful.

NOTE

To ensure proper operation of your Extreme Networks equipment, read this guide before you install any

Extreme Networks equipment.

Introduction

This guide provides the required information to install an Extreme Networks®Summit™ switch. It also

contains information about site location, switch functionality, and switch operation.

This guide is intended for use by network administrators who are responsible for installing and setting

up network equipment. It assumes a basic working knowledge of:

•Local Area Networks (LANs)

•Ethernet concepts

•Ethernet switching and bridging concepts

•Routing concepts

•Simple Network Management Protocol (SNMP)

See the ExtremeWare Software User Guide for information about configuring an Extreme Networks switch.

NOTE

If the information in the Release Notes that shipped with your switch differs from the information in this

guide, follow the Release Notes.

8Consolidated "e" Series Hardware Installation Guide

Preface

Conventions

Table 1 and Table 2 list conventions used throughout this guide.

Related Publications

The Extreme Networks switch documentation set includes:

•Consolidated “e” Series Hardware Installation Guide (this guide)

•ExtremeWare Software User Guide

•ExtremeWare Software Command Reference Guide

•ExtremeWare Release Notes

Table 1: Notice icons

Icon Notice Type Alerts you to...

Note Important features or instructions.

Caution Risk of personal injury, system damage,

or loss of data.

Warning Risk of severe personal injury.

Table 2: Text conventions

Convention Description

Screen displays This typeface represents information as it appears on the screen,

or command syntax.

Screen displays bold This typeface represents commands that you type.

The words “enter”

and “type” When you see the word “enter” in this guide, you must type

something, and then press the Return or Enter key. Do not press

the Return or Enter key when an instruction simply says “type.”

[Key] names Key names appear in text in one of two ways:

•Referenced by their labels, such as “the Return key” or “the

Escape key”

•Written with brackets, such as [Return] or [Esc]

If you must press two or more keys simultaneously, the key names

are linked with a plus sign (+). Example:

Press [Ctrl]+[Alt]+[Del].

Words in italicized type Italics emphasize a point of information or denote new terms at the

place where they are defined in the text.

About This Guide

Consolidated "e" Series Hardware Installation Guide 9

Documentation for Extreme Networks products is available from the Extreme Networks website at the

following location:

http://www.extremenetworks.com/services/documentation/

You can select and download the following Extreme Networks documentation from the Documentation

section of the Services page:

•Release Notes (you must have a valid service contract to access the release notes)

•Software User Guides

•Hardware User Guides

•White Papers

•Troubleshooting Tools

•Preventative Maintenance

•Instructional Videos

•Archives

About This Guide

This guide describes how to prepare your site and how to install, maintain, and operate your Extreme

Networks switch. It contains information on features that are common to all switches, as well as

switch-specific features. This guide contains six parts:

•Preparing for Installation—Describes the “e” series of Summit switches. This section introduces the

Summit 200, Summit 300 and Summit 400 models that comprise the “e” series. It also describes how

to evaluate, plan, and determine the best location for your Extreme Networks switch.

•Switch Overview—Describes the physical characteristics of each of the “e” series, including the front

view, rear view, and LED behaviors.

•Switch Installation—Describes the installation process that is shared by the “e” series of Summit

switches. This section describes rack installation, mini-GBIC installation, connecting to the console

port and installation verification. It also includes the procedure for logging into the switch for the

first time.

•Accessory Installation:

—Summit 200—Describes the optional features and their installation that are specific to the

Summit 200 switch.

—Summit 300—Describes the optional features and their installation that are specific to the

Summit 300 switch.

—Summit 400—Describes the optional features and their installation that are specific to the

Summit 400-48t switch.

•Appendixes—Describes safety requirements and technical specifications.

How To Use This Guide

Each chapter of this guide contains information on how to successfully operate your Extreme Networks

switch. The model-specific chapters contain information that is applicable to that Summit switch only.

All other chapters are applicable to any Extreme Networks switch.

10 Consolidated "e" Series Hardware Installation Guide

Preface

Switch-Specific Information

For switch-specific information, be sure to read the applicable model-specific chapter. For example, if

you have a Summit 400-48t switch and you need to set up a combination port, “Uplink Redundancy”

on page 61 for specific details for cabling combination ports.

Common Information

For items applicable to any Extreme Networks switch, make sure you read the appropriate chapter. For

example, to learn how to prepare your site for installing your Extreme Networks equipment, see

Chapter 2, “Site Preparation.”

This guide also contains appendices that describe:

•Switch safety issues

•Switch specifications

Appendix A, “Safety Information” describes important safety issues such as power, power cables, and

fuses.

Appendix B, ““e” Series Technical Specifications” is organized according to the model of Summit

switch. This appendix describes switch specifications such as physical dimensions, weight, certifications,

and power supply parameters.

Information that is common to all switches is described at the beginning of the appendix.

Otros manuales para Summit 200-24

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Extreme Networks

Extreme Networks

Extreme Networks Summit X150 Series Manual

Extreme Networks

Extreme Networks BlackDiamond 10808 Manual

Extreme Networks

Extreme Networks ExtremeAccess Series Manual

Extreme Networks

Extreme Networks EAS 200-24p Switch Instrucciones de montaje

Extreme Networks

Extreme Networks ExtremeSwitching SLX 9140 Manual

Extreme Networks

Extreme Networks Summit1 Manual

Extreme Networks

Extreme Networks BlackDiamond X8 Series Instrucciones de montaje

Extreme Networks

Extreme Networks ISW Series Manual de usuario

Extreme Networks

Extreme Networks ExtremeSwitching SLX 9030 Series Manual

Extreme Networks

Extreme Networks 8520 Series Manual

Extreme Networks

Extreme Networks ExtremeSwitching VDX 6740 Manual

Extreme Networks

Extreme Networks Alpine 3804 Manual

Extreme Networks

Extreme Networks B-Series B5 Manual de usuario

Extreme Networks

Extreme Networks BlackDiamond 8806 Manual

Extreme Networks

Extreme Networks ExtremeSwitching SLX 9540 Manual

Extreme Networks

Extreme Networks 3626 Manual de usuario

Extreme Networks

Extreme Networks Summit X48 Manual de usuario

Extreme Networks

Extreme Networks Virtual Services Platform 7200 Series Manual de instrucciones

Extreme Networks

Extreme Networks Summit WM100 Manual de usuario

Extreme Networks

Extreme Networks BlackDiamond 8806 Manual

Extreme Networks

Extreme Networks Px Series Manual del operador

Extreme Networks

Extreme Networks Summit X250e Series Manual de usuario

Extreme Networks

Extreme Networks Summit WM100 Manual de usuario

Extreme Networks

Extreme Networks ExtremeSwitching SLX 9150 Manual

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario