Extreme Networks BlackDiamond 10K Series Manual de usuario

Extreme Networks, Inc.

3585 Monroe Street

Santa Clara, California 95051

(888) 257-3000

http://www.extremenetworks.com

Extreme Networks

BlackDiamond 10K-Series

Switch Installation Guide

Published: July 2004

Part number: 104000-00 Rev. 02

registered trademarks of Extreme Networks, Inc. in the United States and certain other jurisdictions. ExtremeWare Vista,

ExtremeWorks, ExtremeAssist, ExtremeAssist1, ExtremeAssist2, PartnerAssist, Extreme Standby Router Protocol, ESRP,

SmartTraps, Summit, Summit1i, Summit4, Summit4/FX, Summit5i, Summit7i, Summit24, Summit48, Summit48i,

Summit Virtual Chassis, SummitLink, SummitGbX, SummitRPS and the Extreme Networks logo are trademarks of

Extreme Networks, Inc., which may be registered or pending registration in certain jurisdictions. The Extreme

Turbodrive logo is a service mark of Extreme Networks, which may be registered or pending registration in certain

jurisdictions. All other registered trademarks, trademarks and service marks are property of their respective owners.

Specifications are subject to change without notice.

All other registered trademarks, trademarks, and service marks are property of their respective owners.

For safety compliance information, see Appendix A.

Authors: Julie Laccabue

Production: Julie Laccabue

Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 3

Contents

Preface

Introduction 7

Conventions 8

Related Publications 9

About This Guide 9

How To Use This Guide 10

Chapter 1 BlackDiamond 10808 Switch Overview

Summary of Features 11

Full-Duplex Support 12

Management Ports 12

Mini-GBIC Type and Hardware/Software Support 12

Mini-GBIC Types and Specifications 12

Safety Information 14

Preparing to Install or Replace a Mini-GBIC 14

Installing and Removing a Mini-GBIC 15

XENPAK Module Installation 16

Chapter 2 Site Preparation

Planning Your Site 20

Step 1: Meeting Site Requirements 20

Step 2: Evaluating and Meeting Cable Requirements 20

Step 3: Meeting Power Requirements 20

Meeting Site Requirements 20

Operating Environment Requirements 20

Rack Specifications and Recommendations 26

Evaluating and Meeting Cable Requirements 28

Cabling Standards 28

4Extreme Networks BlackDiamond 10K-Series Switch Installation Guide

Cable Labeling and Record Keeping 28

Installing Cable 29

RJ-45 Connector Jackets 32

Radio Frequency Interference 32

Making Network Interface Cable Connections 33

Meeting Power Requirements 33

Power Supply Requirements 33

AC Power Cable Requirements 34

Uninterruptable Power Supply Requirements 35

Applicable Industry Standards 36

Chapter 3 BlackDiamond 10808 Switch Chassis

BlackDiamond 10808 Switch Architecture 37

BlackDiamond 10808 Switch Front View 37

BlackDiamond 10808 Switch Rear View 39

BlackDiamond 10808 Switch LEDs 40

Power Socket 40

Installing the Chassis 40

Standard Rack Installation 41

Mid-mount Rack Installation 49

Grounding the BlackDiamond 10808 Switch 51

Installing the BlackDiamond Cable Manager 52

Chapter 4 BlackDiamond 10808 Switch Management Module

MSM Activity 60

MSM LEDs 61

Installing MSMs 62

Verifying the MSM Installation 64

Removing MSMs 64

Chapter 5 BlackDiamond 10808 I/O Modules

Configuring I/O Modules 67

G60T Module 68

G60X Module 69

10G6X Module 70

I/O Module LEDs 71

Installing I/O Modules 72

Verifying the I/O Module Installation 74

LED Indicators 74

Displaying Slot Status Information 74

Removing I/O Modules 75

Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 5

Installing a Blank Front Panel 76

Chapter 6 BlackDiamond 10808 Switch

Power Supplies and Power Supply Controllers

Power Supply Overview 80

Installing the Power Supplies 83

Removing the Power Supplies 84

Power Supply Controller Overview 85

Installing the Power Supply Controllers 86

Verifying a Successful Installation 86

Chapter 7 BlackDiamond 10808 Switch Fan Tray and Filter

BlackDiamond 10808 Switch Fan Tray 87

Removing the BlackDiamond 10808 Switch Fan Tray 88

Installing the Fan Tray 90

Replacing the Filter 91

Chapter 8 Initial Switch and Management Access

Connecting Equipment to the Console Port 93

Logging In for the First Time 95

Appendix A Safety Information

Important Safety Information 97

Power 97

Power Cable 98

Connections 99

Lithium Battery 99

Appendix B Switch Technical Specifications

Index

6Extreme Networks BlackDiamond 10K-Series Switch Installation Guide

Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 7

Preface

This preface provides an overview of this guide, describes guide conventions, and lists other

publications that might be useful.

NOTE

To ensure proper operation of your Extreme Networks equipment, read this guide before you install any

Extreme Networks equipment.

Introduction

This guide provides the required information to install an Extreme Networks BlackDiamond®10808

switch. It also contains information about site location, switch functionality, and switch operation.

This guide is intended for use by network administrators who are responsible for installing and setting

up network equipment. It assumes a basic working knowledge of:

•Local area networks (LANs)

•Ethernet concepts

•Ethernet switching and bridging concepts

•Routing concepts

•Simple Network Management Protocol (SNMP)

See the ExtremeWare XOS Concepts Guide and the ExtremeWare XOS Command Reference Guide for

information about configuring the BlackDiamond 10808 switch.

NOTE

If the information in the release notes that shipped with your switch differs from the information in this

guide, follow the release notes.

8Extreme Networks BlackDiamond 10K-Series Switch Installation Guide

Preface

Conventions

Table 1 and Table 2 list conventions used throughout this guide.

Table 1: Notice icons

Icon Notice Type Alerts you to...

Note Important features or instructions.

Caution Risk of personal injury, system damage,

or loss of data.

Warning Risk of severe personal injury.

Table 2: Text conventions

Convention Description

Screen displays This typeface represents information as it appears on the screen,

or command syntax.

Screen displays bold This typeface represents commands that you type.

The words “enter”

and “type” When you see the word “enter” in this guide, you must type

something, and then press the Return or Enter key. Do not press

the Return or Enter key when an instruction simply says “type.”

[Key] names Key names appear in text in one of two ways:

•Referenced by their labels, such as “the Return key” or “the

Escape key”

•Written with brackets, such as [Return] or [Esc]

If you must press two or more keys simultaneously, the key names

are linked with a plus sign (+). Example:

Press [Ctrl]+[Alt]+[Del].

Words in italicized type Italics emphasize a point of information or denote new terms at the

place where they are defined in the text.

Related Publications

Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 9

Related Publications

The Extreme Networks switch documentation set includes:

•Extreme Networks BlackDiamond 10808 Installation Guide

•ExtremeWare XOS Concepts Guide

•ExtremeWare XOS Command Reference Guide

•ExtremeWare XOS Release Notes

Documentation for Extreme Networks products is available from the Extreme Networks website at the

following location:

http://www.extremenetworks.com/services/documentation/

You can select and download the following Extreme Networks documentation from the Documentation

section of the Services page:

•Release Notes (you must have a valid service contract to access the release notes)

•Software User Guides

•Hardware User Guides

•White Papers

•Troubleshooting Tools

•Preventative Maintenance

•Instructional Videos

•Archives

About This Guide

This guide describes how to prepare your site and how to install, maintain, and operate your Extreme

Networks switch.

•Site Planning—Describes how to evaluate, plan, and determine the location of your Extreme

Networks switch.

•BlackDiamond Switch—Describes the features that are specific to the BlackDiamond switch. This

section provides an overview of the BlackDiamond switch, information about model types, a

summary of features, and installation guidelines.

•Switch Operation—Describes how to power on any Extreme Networks switch, verify the switch

installation, connect equipment to the console port, and log in to the switch for the first time.

•Appendixes—Includes information about safety requirements and technical specifications.

10 Extreme Networks BlackDiamond 10K-Series Switch Installation Guide

Preface

How To Use This Guide

Each chapter of this guide contains information on how to successfully operate your Extreme Networks

BlackDiamond 10808 switch.

This guide also contains appendices that describe:

•Switch safety issues

•Switch specifications

•Module specifications

Appendix A, “Safety Information” describes important safety issues such as power, power cables, and

fuses.

Appendix B, “Switch Technical Specifications” describes switch specifications such as physical

dimensions, weight, certifications, and power supply parameters.

Appendix C, “Module Technical Specifications” describes module specifications such as physical

dimensions, weight, and standards.

Information that is common to all modules is described at the end of the appendix.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Extreme Networks

Extreme Networks

Extreme Networks Summit1 Manual de usuario

Extreme Networks

Extreme Networks Summit X48 Manual de usuario

Extreme Networks

Extreme Networks X460-G2 Series Manual de instalación y operación

Extreme Networks

Extreme Networks ExtremeSwitching 5520 Series Manual

Extreme Networks

Extreme Networks Summit X250e-24p Guía de referencia

Extreme Networks

Extreme Networks ExtremeSwitching CES 2000 Series Manual

Extreme Networks

Extreme Networks Summit X150 Series Manual

Extreme Networks

Extreme Networks Summit X450a-24tDC Manual

Extreme Networks

Extreme Networks 8520 Series Manual

Extreme Networks

Extreme Networks 7720 Manual de usuario

Extreme Networks

Extreme Networks ExtremeSwitching VSP 7400 Series Manual

Extreme Networks

Extreme Networks Alpine 3808 Instrucciones de instalación

Extreme Networks

Extreme Networks ExtremeSwitching SLX 9540 Manual

Extreme Networks

Extreme Networks Summit WM200 Manual de usuario

Extreme Networks

Extreme Networks BlackDiamond 10808 Manual

Extreme Networks

Extreme Networks Hubs & Switches Instrucciones de instalación

Extreme Networks

Extreme Networks Summit 300-24 Manual

Extreme Networks

Extreme Networks Summit X670-G2 Series Manual de instalación y operación

Extreme Networks

Extreme Networks BlackDiamond 6800 Manual

Extreme Networks

Extreme Networks Summit X350 Series Guía de referencia

Extreme Networks

Extreme Networks Summit X650 Series Manual de usuario

Extreme Networks

Extreme Networks Summit Summit4 Manual

Extreme Networks

Extreme Networks Summit X150 Series Manual

Extreme Networks

Extreme Networks BlackDiamond 8806 Manual

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario