EtherWAN EX78162 Series Manual de usuario

EX78162 rev. 2.0

4/28/2016

W70G-EX78162Q2

EX78162 Series Hardened Managed Ethernet Switch

Installation Guide

Unpacking

Unpack the items. Your package should include:

One EX78162 Series hardened managed

switch

One CD containing this user’s guide

If items are missing or damaged, notify your

EtherWAN representative. If possible, save the

carton and packing material in case you need to

ship or store the switch in the future.

2 What Else You Need

Category 5 or better cable for RJ-45 ports

Appropriate SFP cable for SFP ports

Personal computer with a DB9 straight cable

3 Select a Location

Installations: Desktop, Wall-mount, DIN-Rail

mount.

Identify a power source within 6 feet (1.8

meters).

Choose a dry area with ambient temperature

between -40 and 75ºC (-40 and 167ºF).

Be sure there is adequate airflow.

4 Connect to the Data Ports

Depending on the model, your switch can have

the following ports:

16 10/100BASE-TX Power over Ethernet (PoE)

ports

2 Gigabit SFP ports

10/100BASE-TX (PoE) Ports

Ports 1 to 16 support Power over Ethernet, and

provide power to networked devices such as IP

Phones, Wireless LAN Access Points, and IP

security cameras. PoE power budget is 240 watts

maximum.

1 Gbps SFP Ports

Your switch model has two 1 Gbps SFP slots. SFP

transceivers can be installed directly into ports

17 – 18. Ensure that the same type of transceiver

is used at both ends of the link and that the

correct type of fiber cable is used.

EX78162 rev. 2.0

4/28/2016

W70G-EX78162Q2

EX78162 Series Hardened Managed Ethernet Switch

Installation Guide

Apply Power

The switch has two pairs of power inputs:

A 52-57VDC terminal block

Only one power input is required to operate the

switch. However, redundant power supply

functionality is supported.

Terminal Block

The switch provides two power inputs on a 52-

57VDC terminal block. Only one power input is

required to operate the switch. The terminal

block has 5 terminal posts.

Pin Description

Power 1 +52-57VDC

−Power Ground

Power 2 +52-57VDC

−Power Ground

Earth Ground

Relay Output Rating 1A @ 250VAC

Relay Output Alarm

The switch provides relay output contacts for

signaling of a user-defined power or port failure.

The relay output can be connected to an alarm

signaling device. Current is 1A at 250VAC.

Power-Up Sequence

When you apply power:

All

Link/ACT

LEDs blink momentarily.

The

Power 1, 2

LED goes ON.

LEDs for every port connected to a device

flash, as the switch conducts a brief Power

On Self-Test (POST).

6 Console Configuration

Connect to the switch console by connecting

the DB-9 cable to the console port of the

switch and to the serial port of the computer

running a terminal emulation application

(such as Hyperterminal or Putty).

Configuration settings of the terminal-

emulation program: Baud rate: 115,200bps,

Data bits: 8, Parity: none, Stop bit: 1, Flow

control: none.

The default login name is “root,” no

password.

7 Web Configuration

Log in to the switch by launching a web

browser and entering 192.168.1.10 in the

address bar.

Enter the default login ID: root (no password)

and click “Login.” The system information

screen will display as shown below.

Otros manuales de Cambiar de EtherWAN

EtherWAN

EtherWAN EX17908 Series Manual de usuario

EtherWAN

EtherWAN EX38000 Series Manual de usuario

EtherWAN

EtherWAN EX73900X Series Manual de usuario

EtherWAN

EtherWAN EX42008 Series Manual de usuario

EtherWAN

EtherWAN EX78900X Series Manual de usuario

EtherWAN

EtherWAN EX41922 Manual de usuario

EtherWAN

EtherWAN EX24000 Manual de usuario

EtherWAN

EtherWAN EX70900 Manual de usuario

EtherWAN

EtherWAN EX45900 series Manual de usuario

EtherWAN

EtherWAN EX17082A Manual de usuario

EtherWAN

EtherWAN EX19164A Manual de usuario

EtherWAN

EtherWAN EX48000A Series Manual de usuario

EtherWAN

EtherWAN EX32908 series Manual de usuario

EtherWAN

EtherWAN EX63000 Series | Manual de usuario

EtherWAN

EtherWAN EX78000 Series Manual de usuario

EtherWAN

EtherWAN EX77964 Manual de usuario

EtherWAN

EtherWAN EX42008 Series Manual de usuario

EtherWAN

EtherWAN EG99000 Series Manual de usuario

EtherWAN

EtherWAN EX32008 Series Manual de usuario

EtherWAN

EtherWAN OttoE TG103 Series Manual de usuario

EtherWAN

EtherWAN EX42908 series Manual de usuario

EtherWAN

EtherWAN EX16908 Manual de usuario

EtherWAN

EtherWAN EX87000 Series Manual de usuario

EtherWAN

EtherWAN EX77000 Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario