EtherWAN EX19082 Manual de usuario
User’s Guide
EX19082, EX19164, and EX19244
Smart Managed Switches
FastFind Links
Introduction
Unpacking and Installation
Preparing to Configure the Switch
Configuring the Switch
All Rights Reserved
Dissemination or reproduction of this document, or its contents, is not authorized except where expressly
permitted. Violators are liable for damages. All rights reserved, for the purposes of patent application or
trademark registration.
Disclaimer of Liability
The information contained in this document is subject to change without notice. EtherWAN is not liable for any
errors or omissions contained herein or for resulting damage in connection with the information provided in this
manual.
Registered Trademarks
The following words and phrases are registered Trademarks of EtherWAN Systems Inc.
EtherOS™
Ethernet to the World™
All other trademarks are property of their respective owners.
Warranty
For details on the EtherWAN warranty replacement policy, please visit our web site at:
www.etherwan.com/us
Products Supported by this Manual:
EX19082, EX19164, and EX19244
iii
Preface
Audience
This guide is designed for the person who installs, configures, deploys, and maintains the Ethernet
network. This document assumes the reader has moderate hardware, computer, and Internet skills.
Document Revision Level
This section provides a history of the revision changes to this document.
Revision Document Version Date Description
A Version 1 04/05/2021 Initial release
Changes in this Revision
Initial Release
iv
Document Conventions
This guide uses the following conventions to draw your attention to certain information.
Safety and Warnings
This guide uses the following symbols to draw your attention to certain information.
Symbol Meaning Description
Note Notes emphasize or supplement important points of the main text.
Tip Tips provide helpful information, guidelines, or suggestions for performing tasks more
effectively.
References to Switch Models
This guide covers the EX19082, EX19164, and EX19244 Smart Managed Switches from EtherWAN
Systems, Inc. When information in this guide applies to all models, the models are referred to
collectively as “the switch.” If information applies to specific models only, those models are identified
by model name (EX19082, EX19164, or EX19244).
v
Contents
Preface ..................................................................................................................... iii
Changes in this Revision ........................................................................................... iii
Document Conventions ............................................................................................ iv
Safety and Warnings .......................................................................................... iv
References to Switch Models ............................................................................. iv
Contents ................................................................................................................... v
1 Introduction ........................................................................................................... 7
Key Features ............................................................................................................. 9
Model EX19082 Features .................................................................................... 9
Model EX19164 Features .................................................................................... 9
Model EX19244 Features .................................................................................... 9
Common Features ............................................................................................... 9
Quick Start Guide .................................................................................................... 10
2 Unpacking and Installation ................................................................................ 12
Unpacking the Hardware ......................................................................................... 13
System Requirements ............................................................................................. 13
Hardware Features .................................................................................................. 14
Front Panel ........................................................................................................ 14
Rear Panel ........................................................................................................ 17
Side and Bottom Panels .................................................................................... 17
Installing the Switch ................................................................................................. 18
Preparing the Site .............................................................................................. 19
Installing the Switch ........................................................................................... 19
Connecting to the 10/100/1000 Mbps RJ-45 Ports ............................................. 22
Connecting to the SFP Ports ............................................................................. 23
Checking the Installation .................................................................................... 23
Applying AC Power ............................................................................................ 24
vi
Where to Go from Here ........................................................................................... 24
3 Preparing to Configure the Switch .................................................................... 25
Connecting the PC .................................................................................................. 26
Configuring TCP/IP Settings for Windows 10 .......................................................... 26
Disabling Firewall and Security Software ................................................................. 28
4 Configuring the Switch ....................................................................................... 29
Logging in to the Web Management Interface ......................................................... 30
Idle Time Security .................................................................................................... 32
Understanding the Web Management Interface....................................................... 32
Web Management Interface Menus ......................................................................... 33
Configuration Menu ........................................................................................... 34
Monitoring Menu ................................................................................................ 54
Maintenance Menu ............................................................................................ 61
5 Troubleshooting.................................................................................................. 67
Troubleshooting Chart ............................................................................................. 68
Additional Troubleshooting Suggestions .................................................................. 69
Network Adapter Cards ..................................................................................... 69
Configuration ..................................................................................................... 69
Switch Integrity .................................................................................................. 69
Auto-Negotiation ................................................................................................ 69
Appendix A - Specifications ................................................................................. 70
Technology .............................................................................................................. 70
Power ...................................................................................................................... 71
Mechanical .............................................................................................................. 71
Interface .................................................................................................................. 72
Environment ............................................................................................................ 72
Regulatory Approvals .............................................................................................. 72
7
1 Introduction
Topics: Congratulations on your purchase of the Smart Managed
EX19082, EX19164, or EX19244 Switch from EtherWAN
Systems, Inc. Your switch is a state-of-the-art IEEE-compliant
network solution designed for users who require
high-performance along with the power of management to
eliminate bottlenecks and increase productivity.
Your switch is also a Power Sourcing Equipment (PSE) device. All
10/100/1000 Mbps ports support Power over Ethernet (PoE),
which detects and supplies power with IEEE 802.3af/at-compliant
powered devices automatically. The switch also provides
Gigabit-speed connections to servers and other Gigabit Ethernet
switches. To simplify installation, the switch is shipped ready for
use.
Key Features (page 9)
Quick Start Guide (page
10)
8
Figure 1-1. EX19082 Series Switch
Figure 1-2. EX19164 Series Switch
Figure 1-3. EX19244 Series Switch
9
Key Features
This section summarizes the key features of the switches.
Model EX19082 Features
8 10/100/1000TX ports supporting (IEEE 802.3af/at) Power over Ethernet (PoE) Power Sourcing
Equipment (PSE), with a total PoE power budget of 250 W Max.
Model EX19164 Features
16 10/100/1000TX ports supporting (IEEE 802.3af/at) Power over Ethernet (PoE) Power Sourcing
Equipment (PSE), with a total PoE power budget of 250 W Max.
Model EX19244 Features
24 10/100/1000TX ports supporting (IEEE 802.3af/at) PoE PSE, with a total PoE power budget of
460 W Max.
Common Features
Full/half-duplex, auto-negotiation, and auto-MDI/MDIX
Web-based management interface
100 – 240 VAC, 50 – 60 Hz internal universal power supply
0°C to 50°C (32°F to 122°F) operating temperature range
10
Quick Start Guide
The following procedure enables advanced users to get their switch up and running in the shortest
possible time. For detailed installation instructions, refer to the sections in the right column below.
Step Description For Reference, See…
1. Find a Location for the Switch
Set the switch on a flat surface or mount it in a standard rack (1 rack unit high).
“Preparing the Site” (page 19)
2. Connect to the 10/100/1000 Mbps Switch Ports
Connect one end of a Category 5e or better Ethernet cable to the Ethernet port of a computer,
printer, network storage, IP camera, or other network/PoE device.
Connect the other end to a 10/100/1000 Mbps RJ-45 port on the switch:
Model EX19082: use ports 1 through 8. Port 9 can be used as a data port.
Model EX19164: use ports 1 through 16.
Model EX19244: use ports 1 through 24.
Repeat this step for each additional device you want to connect to the ports.
“Gigabit RJ-45 Ports" (page 15)
and
“Connecting to the 10/100/1000 Mbps
RJ-45 Ports” (page 22)
3. Connect to the SFP Ports
Connect to the SFP ports. For EX19164 and EX19244, the last 4 RJ-45 ports are shared with the
SFP ports. If a shared RJ-45 or SFP port is being used, the other port cannot be used at the same
time.
“Gigabit SFP Ports” (page 15)
SFP Ports:
Remove any protector plugs from the SFP transceivers on the front of the switch.
Position and insert a SFP transceiver into one of the SFP ports until it is firmly seated, and then
close the latching bale.
Model EX19082: use port 10FX.
Model EX19164: use ports 13 FX through 16 FX.
Model EX19244: use ports 21 FX through 24 FX.
Repeat this step to use another SFP port if necessary.
“Connecting to the SFP Ports” (page
22)
4. Power On
Connect the female end of the supplied AC power adapter cable to the power receptacle on
the back of the switch.
Connect the 3-pronged end of the AC power adapter cable to a grounded 3-pronged AC outlet.
Move the ON/OFF switch on the rear panel of the switch to the ON position.
Wait for the switch to complete its Power On Self Test.
Confirm that the LEDs for ports connected to a device are on. If not, replace the Ethernet
cable, and then check the port LED again.
“Applying AC Power” (page 24)
Otros manuales para EX19082
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cambiar de EtherWAN
EtherWAN
EtherWAN EX87000 Series Manual de usuario
EtherWAN
EtherWAN EX73000 Series Manual de usuario
EtherWAN
EtherWAN EX42905 Series Manual de usuario
EtherWAN
EtherWAN EX61000A Manual de usuario
EtherWAN
EtherWAN EX17082 Manual de usuario
EtherWAN
EtherWAN EX78900X Series Manual de usuario
EtherWAN
EtherWAN EX77900 Series Manual de usuario
EtherWAN
EtherWAN EX77000 Series Manual de usuario
EtherWAN
EtherWAN EX26484 Series Manual de usuario
EtherWAN
EtherWAN EX42395AT Manual de usuario
EtherWAN
EtherWAN EX25611 Manual de usuario
EtherWAN
EtherWAN EX89000 Manual de usuario
EtherWAN
EtherWAN EX32008 Series Manual de usuario
EtherWAN
EtherWAN EX75900 Series Manual de usuario
EtherWAN
EtherWAN EX34000 Manual de usuario
EtherWAN
EtherWAN EX19082 Manual de usuario
EtherWAN
EtherWAN SmartE Series Manual de usuario
EtherWAN
EtherWAN EX42000 Series Manual de usuario
EtherWAN
EtherWAN EX32905 Series Manual de usuario
EtherWAN
EtherWAN EX48000A Series Manual de usuario
