ERNITEC Mercury SX4 series Manual de usuario

User’s Manual

Mercury SX 4 Series

SSSSSeriesseries

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

Caution and Preventive Tips

Important Information

Before proceeding, please read and observe all instructions and warnings in this manual.

Retain this manual with the original bill of sale for future reference and, if necessary,

warranty service. When unpacking your unit, check for missing or damaged items. If any

item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS

PRODUCT. Contact your dealer for assistance.

Handle with care, do not drop the unit

Mount the unit in an equipment rack or place it on a solid, stable surface

Indoor use only. Do not place the unit in a humid, dusty, oily, or smoky site

Do not place it in an area with poor ventilation or in an area close to fire or other

sources of heat. Doing so may damage the unit as well as cause fire or an electric

shock

When cleaning is necessary, shut down the system and unplug the unit from the

outlet before uncovering the top cover. Do not use liquid cleaners or aerosol

cleaners. Use only a damp cloth for cleaning

Always shut down the system prior connecting or disconnecting accessories, with

the exception of USB devices

Under copyright laws, the contents of this user manual may not be copied, photocopied,

translated, reproduced or reduced to any electronic medium or machine-readable format,

in whole or in part, without prior written permission of the company.

Important Information

Before proceeding, please read and observe all instructions and warnings in this manual.

Retain this manual with the original bill of sale for future reference and, if necessary,

warranty service. When unpacking your unit, check for missing or damaged items. If any

item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS

PRODUCT. Contact your dealer for assistance.

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

Regulation

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause

undesired operation.

This symbol on the product or on its packaging indicates that this product

shall not be treated as household waste in accordance with Directive

2002/96/EC. Instead it shall be handed over to the applicable collection

point for the recycling of electrical and electronic equipment. By proper

waste handling of this product you ensure that it has no negative

consequences for the environment and human health, which could

otherwise be caused if this product is thrown into the garbage bin. The

recycling of materials will help to conserve natural resources.

For more details information about recycling of this product, please contact

your local city office, your household waste disposal service or the shop

where you purchased the product.

This symbol intends to alert the user to the presence of unprotected

“Dangerous Voltage”within the product’s enclosure that may be strong

enough to cause a risk of electric shock.

This symbol intends to alert the user to the presence of important operating

and maintenance (servicing) instructions in the literature accompanying the

appliance.

Compliance is evidenced bywritten declarationfrom our suppliers, assuring

that any potential trace contamination levels of restricted substances are

below the maximum level set by EU Directive 2002/95/EC, or are exempted

due to their application.

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

Table of Contents

1. Overview............................................................................................................................4

1.1 Features..................................................................................................................4

1.2 Package Contents ...................................................................................................5

1.3 Dimensions..............................................................................................................6

1.4 Connectors..............................................................................................................7

2. Camera Cabling.................................................................................................................8

2.1 Connect Power........................................................................................................8

2.2 Connect Ethernet Cable...........................................................................................8

2.3Connect Alarm I/O...................................................................................................8

3. System Requirements.......................................................................................................8

4. Access Camera ...............................................................................................................10

5. Setup Video Resolution..................................................................................................15

6. Configuration Files Export / Import ...............................................................................16

7. Tech Support Information...............................................................................................17

7.1 Delete the Existing Viewer.....................................................................................17

7.2 Setup Internet Security ..........................................................................................18

Appendix: Technical Specifications

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

1. Overview

The Full HD Multi-Streams Mini Rugged Dome IP Camera is an easy setup

camera with PoE supported to reduce complicated cabling without sacrificing

performance. Quad Streams Compression (H.264 Baseline / Main / High

Profile + MJPEG) are supported for efficient bandwidth and storage

management. Up to 4M resolution is offered for providing high definition

images. For dark environments, the camera has incorporated WDR, 3DNR

and Day / Night ICR technologies to capture clear images in lowlight

conditions.

The compact outlook design of the camera is ideal for hard surface mount

installation, and the conduit enables waterproof cabling in outdoor

environments. Meanwhile, the modularized design of the camera makes the

installation even easier by directly snapping on the camera module after

housing installation.

1.1 Features

1/3” Progressive Scan CMOS Sensor

Dual Streaming- Full HD 1080P Real Time + D1 Real Time

Quad Streams Compression- H.264 Baseline / Main / High Profile +

MJPEG

Multi-language Support

Smart Event Function-

Motion Detection / Network Failure Detection / Tampering Alarm /

Periodical Event / Manual Trigger / Audio Detection

Remote Zoom & Focus (Motorized Lens and AF Lens)*

True Wide Dynamic Range (120dB)

Privacy Masks

3D Noise Reduction / 2D Noise Reduction

Vertical View Mode (Image rotation by 90 degrees)

Smart IR Mode

True Day / Night (ICR)

IR LED Module (working distance up to 45 m)

SD Card Support

BNC Analog Output

RS-485 Support

Weatherproof (IP66 International)

ONVIF Profile S Support

(*) Optional

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

1.2 Package Contents

Please check the package containing the following items listed below.

Full HD Multi-Streams

Mini Rugged Dome IP Camera

2-Pin Power Terminal Block

BNC Analog Cable Included

Self Tapping Screws (x2)

Plastic Screw Anchors (x2)

Quick Guide

USB Stick

(bundled software and documentation)

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

1.3 Dimensions

The dimensions of the camera are shown below.

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

1.4 Connectors

The diagram below shows the default button and various connectors of the

camera. Definition for each connector is given as follows.

No.

Connector

Definition

Remarks

RJ-45

For network and PoE connections

BNC*

BNC

For analog video output

GND

Power

(DC 12V / AC 24V)

DC 12V

AC 24V 1

Power connection

GND

AC 24V 2

RS-485

D+

RS-485 connection

D-

GND

Default Button

Press the reboot button with a proper tool for at

least 20 seconds to reboot the camera.

Alarm & Audio I/O

Audio In L

Audio In

Audio In R

GND

Audio Out L

Audio Out

Audio Out R

Alarm Out +

Alarm connection

Alarm Out −

Alarm In +

Alarm In −

SD Card Slot

Insert the SD card into the card slot to store videos

and snapshots. Do not remove the SD card when

the camera is powered on.

*Please contact the manufacturer for the compatible BNC cable.

NOTE: It is not recommended to record with the SD card for 24/7

continuously, as it may not be able to support long term continuous

data read/write. Please contact the manufacturer of the SD card for

information regarding the reliability and life expectancy.

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

2. Camera Cabling

Before users connect cables, make sure that all cables and the power

adaptor are placed in dry and well-waterproofed environments, e.g.

waterproof boxes. The purpose is to prevent moisture accumulation inside

the camera and moisture penetration into cables, which might lead to device

breakdown. Please refer to the following sections for camera connection.

2.1 Connect Power

For power connection, please refer to section Connectors. Alternatively,

users can power the camera by PoE if a Power Sourcing Equipment (PSE)

switch is available. Please refer to the section below for Ethernet cable

connection.

NOTE: If PoE is used, make sure PSE is in use in the network.

2.2 Connect Ethernet Cable

To have best transmission quality, cable length shall not exceed 100 meters.

Connect one end of the Ethernet Cable to the RJ-45 connector of the

camera, and plug the other end of the cable to the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed

when connecting the IP camera directly to PC.

Check the status of the link indicator and activity indicator LEDs. If the LEDs

are unlit, please check the LAN connection.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

2.3 Connect Alarm I/O

The camera supports one alarm input and one relay output for alarm

application. Refer to section Connectors for pin definitions.

3. System Requirements

To perform the IP camera via web browser, please ensure the PC is in good

network connection, and meet system requirements as described below.

Items

System Requirement

Personal Computer

1. Intel®Pentium®M, 2.16 GHz or

Intel®CoreTM2 Duo, 2.0 GHz

2. 2 GB RAM or more

Operating System

Windows VISTA / Windows XP / Windows 7

User’s Manual – Mercury SX4 series

www.ernitec.com

V 3.01.090117

Web Browser

Microsoft Internet Explorer 6.0 or later

Firefox

Chrome

Safari

Network Card

10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation

Viewer

ActiveX control plug-in for Microsoft IE

Tabla de contenidos

Otros manuales de Cámara de seguridad de ERNITEC

ERNITEC

ERNITEC Orion DX 832 IR Manual de usuario

ERNITEC

ERNITEC MicroView MVCLOUD-201 Manual de usuario

ERNITEC

ERNITEC Orion/2 Manual de usuario

ERNITEC

ERNITEC MicroView MVCLOUD-201 Manual de usuario

ERNITEC

ERNITEC Performance Series Manual de usuario

ERNITEC

ERNITEC MERCURY SX 5TH GENERATION Manual de usuario

ERNITEC

ERNITEC Orion/2 Guía

ERNITEC

ERNITEC MicroView MVIB-04IR-E Manual de usuario

ERNITEC

ERNITEC MicroView MVIB-01IR-E Manual de usuario

ERNITEC

ERNITEC EIP Series Manual de usuario

ERNITEC

ERNITEC MicroView MVIB-01IR-E Manual de usuario

ERNITEC

ERNITEC MicroView MVCLOUD-101 Manual de usuario

ERNITEC

ERNITEC DS-2CD6986F-H Manual de usuario

ERNITEC

ERNITEC MicroView MVIC-O4IR-E Manual de usuario

ERNITEC

ERNITEC ASTRAL Instrucciones de montaje

ERNITEC

ERNITEC Orion SX Series Manual de usuario

ERNITEC

ERNITEC MicroView MVIC-04IR-E Manual de usuario

ERNITEC

ERNITEC DS-2XM6726G0-IS/ND Manual de usuario

ERNITEC

ERNITEC Corona IP-452 IR Manual de usuario

ERNITEC

ERNITEC MVID-04IR-E Manual de usuario

ERNITEC

ERNITEC Orion DX 822IR Manual de usuario

ERNITEC

ERNITEC SX Series Manual de usuario

ERNITEC

ERNITEC Mercury SX32 Series Manual de usuario

ERNITEC

ERNITEC ECB Series Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario