ERNITEC MERCURY SX 5TH GENERATION Manual de usuario

2018SX5MA_v1

MERCURY SX 5TH GENERATION

IR Dome IP Camera

User’s Manual

Ver. 1.1

Table of Contents

1. Overview .................................................................................................................................. 2

1.1 Features ........................................................................................................................ 2

1.2 Package Contents ......................................................................................................... 3

1.3 Dimensions.................................................................................................................... 4

1.4 Connectors .................................................................................................................... 5

2. Camera Cabling....................................................................................................................... 6

2.1 Connect Power.............................................................................................................. 6

2.2 Connect Ethernet Cable ................................................................................................ 6

2.3 Connect Alarm I/O......................................................................................................... 7

2.4 Camera Installation ....................................................................................................... 7

3. System Requirements ............................................................................................................ 9

4. Access Camera ..................................................................................................................... 10

5. Setup Video Resolution........................................................................................................ 14

6. Configuration Files Export / Import..................................................................................... 15

7. Tech Support Information .................................................................................................... 16

7.1 Delete the Existing DCViewer ..................................................................................... 16

7.2 Setup Internet Security................................................................................................ 17

1. Overview

MERCURY SX 5TH GENERATIONIR Dome IP Camera is capable of

simultaneous video streaming in H.265, H.264 and M-JPEG format. The camera

has a maximum resolution of 4MP @ 30fps in both H.265 and H.264 in High

Dynamic Range (HDR) mode to ensure more image details are captured under

challenging lighting conditions.

The camera is designed to withstand ever-changing outdoor environment and is

compliant with IP 66 and IK 10 standard. It is equipped with IR LED with an

effective distance of up to 40 meters to ensure its usability under poor lighting

condition. The camera operating temperature ranges from -55°C to 55°C.

1.1 Features

•Multiple Progressive Scan CMOS Sensor Support up to 4MP Resolution

•Multi Exposure HDR

•Multi Codec Support (H.265 / H.264 / MJPEG)

•Low Latency Streaming

•Quad Streams Support

•True Day/Night Function (ICR)

•IR LED (Working Distance up to 40m)

•BNC Analog Output for Installation Support

•3D Motion Compensated Noise Reduction (MCTF)

•Smart Event Function-

External Input/ Motion Detection/ Network Failure Detection/ Tampering

Alarm/ Periodical Event/ Manual Trigger/ Audio Detection

•Text Overlay and Privacy Masks

•Micro SD/SDHC/SDXC Card Support

•ONVIF Profile S/G/Q Support

•Smart Low Bitrate Control

•Weatherproof (IP66)

•Vandal Proof (IK10 Rating)

•Zero-Down-Time(ZDT) Power Switching

1.2 Package Contents

Please check the package containing the following items listed below.

R3-F H.265

IR Dome IP Camera

Quick Guide

4-Pin Power Terminal Block

Cable Gland

Self-Tapping Screws (x2)

Plastic Screw Anchors (x2)

DC 12V Power connector

Security Torx

NOTE: To use an external power supply, please contact the camera

manufacturer to confirm that the power supply uses the same power

specifications as the camera. The power supply must comply with the

LPS requirements.

NOTE: Users MUST pre-drill and use plastic anchors before fastening

the supplied self-tapping screws on the wall.

NOTE: This camera contains replaceable batteries. To prevent explosion

risks, confirm the battery type before replacement. Dispose of used

batteries in accordance with the local regulations.

1.3 Dimensions

The dimensions of the camera are shown below.

1.4 Connectors

The diagram below shows the default button and various connectors of the

camera. Definition for each connector is given as follows.

No.

Connector

Definition

Remarks

RJ-45

For network and PoE connections

2 BNC*

GND

For analog video output

BNC

3 Power

(DC 12V / AC 24V)

AC 24V 1

Power connection

AC 24V 2

DC 12V 1

DC 12V 2

4 Default Button -

Press the default button with a proper tool for

at least 20 seconds to restore the camera.

5 microSD Card Slot -

Insert the microSD card into the card slot to

store videos and snapshots. Do not remove

the microSD card when the camera is powered

on.

6 Alarm & Audio I/O

Audio In L

Audio In (Line In)

Audio In R

GND

Ground connection

Audio Out L

Audio Out (Line Out)

Audio Out R

Alarm Out +

Alarm connection

**Do NOT

connect external

power supply to the alarm I/O

connector of the IP camera.

Alarm Out −

Alarm In +

Alarm In −

*Please contact the manufacturer for the compatible BNC cable.

NOTE: It is not recommended to record with the microSD card for 24/7

continuously, as it may not be able to support long term continuous data

read/write. Please contact the manufacturer of the microSD card for

information regarding the reliability and life expectancy.

2. Camera Cabling

Before users connect cables, make sure that all cables and the power adaptor

are placed in dry and well-waterproofed environments, e.g. waterproof boxes.

The purpose is to prevent moisture accumulation inside the camera and moisture

penetration into cables, which might lead to device breakdown. Please refer to

the following sections for camera connection.

2.1 Connect Power

For power connection, please refer to section Connectors. Alternatively, users

can power the camera by PoE if a Power Sourcing Equipment (PSE) switch is

available. Please refer to the section below for Ethernet cable connection.

NOTE: If PoE is used, make sure PSE is in use in the network.

2.2 Connect Ethernet Cable

To have best transmission quality, cable length shall not exceed 100 meters.

Connect one end of the Ethernet Cable to the RJ-45 connector of the camera,

and plug the other end of the cable to the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when

connecting the IP camera directly to PC.

Check the status of both power and network activity indicator LEDs. If either LED

is unlit, please check the corresponding connection.

Green Power LED lights up when the camera is powered up.

Orange Network LED (1) flashes when data is being transmitted

over network, (2) lights up for good network connection.

2.3 Connect Alarm I/O

The camera supports one alarm input and one relay output for alarm application.

Refer to section Connectors for pin definitions.

NOTE: Do NOT connect external power supply to the alarm I/O

connector of the IP camera.

2.4 Camera Installation

The following description demonstrates how to directly install the camera to the

ceiling or to the wall.

NOTE: This camera must be installed by qualified personnel and the

installation should conform to all local codes.

Step 1:

Loosen the two security screws on the camera

with the supplied security torx and open the

dome cover.

Step 2:

Open the back conduit entry block using a coin

and place it to the side conduit entry.

Step 3:

Place the camera at the installation location.

Mark the position of the two screw holes and

the back conduit entry (for cable entry use)

indicated in the right figure on the ceiling/wall.

Step 4:

On the ceiling/wall, drill the cable entry hole

(back conduit entry).

Step 5:

Drill a hole slightly smaller than the supplied plastic screw anchor on each

marked screw hole. Then insert the plastic screw anchors into the drilled holes.

Step 6:

Thread the cables through the cable entry hole. Match the two screw holes on

the camera with the plastic screw anchors at the installation location. Fasten the

camera with the supplied self-tapping screws.

Step 7:

Attach the dome cover to the camera and fasten the two security screws.

3. System Requirements

To perform the IP camera via web browser, please ensure the PC is in good

network connection, and meet system requirements as described below.

Items System Requirement

Personal Computer

Minimum :

1. Intel® CoreTM i5-2430M @ 2.4 GHz

2. 4 GB RAM

Recommended :

1. Intel® CoreTM i7-870 @ 2.93 GHz

2. 8 GB RAM

Operating System

Windows VISTA / Windows XP / Windows 7 / Windows 10

Web Browser

Microsoft Internet Explorer 11.0 (recommended)

Chrome

Firefox

Safari

Network Card 10Base-T (10 Mbps), 100Base-TX (100 Mbps) or

1000Base-T operation

Viewer ActiveX control plug-in for Microsoft IE

NOTE: The ITE is to be connected only to PoE networks without routing

to the outside plant or equivalent description.

Tabla de contenidos

Otros manuales de Cámara de seguridad de ERNITEC

ERNITEC

ERNITEC ECB Series Manual de usuario

ERNITEC

ERNITEC DS-2XM6726G0-IS/ND Manual de usuario

ERNITEC

ERNITEC Mercury SX4 series Manual de usuario

ERNITEC

ERNITEC MicroView MVID-03IR-E Manual de usuario

ERNITEC

ERNITEC MicroView MVIC-O4IR-E Manual de usuario

ERNITEC

ERNITEC Orion/3-DN Outdoor Instrucciones de montaje

ERNITEC

ERNITEC Orion/2 Manual de usuario

ERNITEC

ERNITEC DS-2CD6986F-H Manual de usuario

ERNITEC

ERNITEC EIP Series Manual de usuario

ERNITEC

ERNITEC Orion SX Series Manual de usuario

ERNITEC

ERNITEC MicroView MVCLOUD-201 Manual de usuario

ERNITEC

ERNITEC Orion DX 832 IR Manual de usuario

ERNITEC

ERNITEC Orion DX 822IR Manual de usuario

ERNITEC

ERNITEC MicroView MVCLOUD-201 Manual de usuario

ERNITEC

ERNITEC Hawk SX Manual de usuario

ERNITEC

ERNITEC MicroView MVIB-04IR-E Manual de usuario

ERNITEC

ERNITEC Orion/2 Guía

ERNITEC

ERNITEC MicroView MVIB-01IR-E Manual de usuario

ERNITEC

ERNITEC EVA 101 Manual de usuario

ERNITEC

ERNITEC SX Manual de usuario

ERNITEC

ERNITEC Orion Manual de usuario

ERNITEC

ERNITEC MicroView MVIC-04IR-E Manual de usuario

ERNITEC

ERNITEC Performance Series Manual de usuario

ERNITEC

ERNITEC MicroView MVIB-01IR-E Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario