ERNITEC EVA 101 Manual de usuario
EVA 101
Installation Guide
INFORMATION TO USER
CAUTION
RISK OF ELECTRIC SHOCK,
DO NOT OPEN
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SEERIVCE PERSONEL.
This sy bol is intended to alert the user to the presence of un-insulated
“dangerous voltage” within the product’s enclosure that ay be of sufficient
agnitude to constitute a risk of electric shock to persons.
!
This sy bol is intended to alert the user to the presence of i portant
operating and aintenance (servicing) instructions in the literature
acco panying the appliance.
NVC/IPE Series IPE1100 Installation Guide
02A.02 UDP Technology Ltd. 3
Table of Contents
FEATURES................................................................................................................. 4
PACKAGE CONTENTS ................................................................................................ 5
PART NAMES............................................................................................................ 6
Rear View ................................................................................................................................. 6
Botto View.............................................................................................................................. 6
INSTALLATION.......................................................................................................... 9
Installing a C/CS Mounting lens ................................................................................................ 9
Installing an Auto IRIS lens........................................................................................................ 9
CONNECTIONS........................................................................................................ 12
9 pin ter inal block................................................................................................................. 12
Power Adaptor Connector (DC 12V) ....................................................................................... 14
CONFIGURATION.................................................................................................... 15
Set up network environ ent .................................................................................................. 15
View video on web page ......................................................................................................... 15
View video using IPAd in Tool........................................................................................... 15
View video using IP address ................................................................................................ 18
Reset........................................................................................................................................ 18
Factory Default........................................................................................................................ 18
APPENDIX (A): SPECIFICATIONS .............................................................................. 19
Su ary ................................................................................................................................. 19
VCA (Video Content Analysis) ................................................................................................. 20
Electrical Characteristics ......................................................................................................... 21
Environ ent Condition ........................................................................................................... 21
APPENDIX (B): DIMENSIONS ................................................................................... 22
APPENDIX (C): ACCESSORIES................................................................................... 23
APPENDIX (D): TROUBLE S OOTING ....................................................................... 24
Checking your Fir ware ......................................................................................................... 24
Support.................................................................................................................................... 24
REVISION ISTORY ................................................................................................. 25
NVC/IPE Series IPE1100 Installation Guide
02A.02 UDP Technology Ltd. 4
FEATURES
FEATURESFEATURES
FEATURES
Camera
•Box type IP Ca era
•Sony 1/3” Super HAD CCD & High Quality SS-HQ1 Full Kit Chip Set
Sony 1/3" Vertical Double Density Color CCD (Optional)
•True Day / Night (ICR) and WDR (Optional)
Streaming
•Dual strea ing ode (such as different codec/resolution/bit rate and so on.)
•De-interlacing on DSP
•Burnt-in text supported
•Unicast/Multicast supported
Video/Audio
•Video co pression: H.264/MPEG/MJPEG, 25/30FPS@D1(PAL/NTSC)
•Audio co pression: G.711(µLaw, aLaw)/PCM
•Analog video out for external onitors
•Video Motion Detection supported
•2-way ono audio supported
Network
•RTSP/ HTTP protocol supported
•10/100 Base-T Ethernet
Additional Features
•RS-485 supported
•USB 2.0 supported (External storage, Wireless LAN)
•Micro SD card supported
•PoE supported
•Built-in Video Content Analysis
•OSD supported
•SDK (Software Develop ent Kit) provided
VCA (Video Content Analysis)
•VCA Presence (Included as basic)
•VCA Surveillance (Optional)
NVC/IPE Series IPE1100 Installation Guide
02A.02 UDP Technology Ltd. 5
PACKAGE CONTENTS
PACKAGE CONTENTSPACKAGE CONTENTS
PACKAGE CONTENTS
Unpack carefully and handle the equip ent with care. The packaging contains:
EVA 101 DC power adaptor
Mount ring 9 Pin terminal block
Rubber cap (for protecting CCD) exa wrench driver
Adaptor for mounting the camera Screws
Quick Installation Guide DC Jack Adaptor Cable
Note
i
The above contents are subject to change without prior notice.
NVC/IPE Series IPE1100 Installation Guide
02A.02 UDP Technology Ltd. 6
PART
PARTPART
PART
NA ES
NA ESNA ES
NA ES
Rear View
Bottom View
⑥
⑥
⑥
⑥
⑥
⑥
⑥
⑥
ETHERNET
Micro SD
RESET
LOOP OUT
RS-485
DO
DI
AUDIO
-
+
C
1
C
1
Out
In
⑥
NVC/IPE Series IPE1100 Installation Guide
02A.02 UDP Technology Ltd. 7
○
○○
○,
1
Analog video out
It is an analog video output port.
○
○○
○,
2
Reset Switch (Reset)
Reset switch is used for restarting EVA 101 or resetting EVA 101 as Factory Default (FD).
○
○○
○,
3
USB connector
Insert a USB storage device or Wi-Fi devices. (Only Ralink RT73 chipsets based wireless devices
are available.)
○
○○
○,
4
9 pin terminal block for D/I, D/O, audio, and serial communication
○
○○
○,
5
Power Adaptor Connector (DC 12V)
EVA 101 needs a DC12V for power supply.
Caution
!
Make sure the polarity is correct. Incorrect connection ay cause alfunction
or da age to the IP device.
○
○○
○,
6
Micro SD Card socket
It is a e ory card slot for external storage.
○
○○
○,
7
LAN Connector (Ethernet)
This is a RJ45 LAN connector for 10/100 Base-T Ethernet.
+
-
Statu
s LED
Network LED
NVC/IPE Series IPE1100 Installation Guide
02A.02 UDP Technology Ltd. 8
○
○○
○,
8
4 pin connector for Auto IRIS
Only DC-drive type is supported.
○
○○
○,
9
Adaptor for mounting the camera
Mounting points adaptor is provided on the botto (or the top) of the ca era for ounting
the ca era on a bracket or tripod.
NVC/IPE Series IPE1100 Installation Guide
02A.02 UDP Technology Ltd. 9
INSTALLATION
INSTALLATIONINSTALLATION
INSTALLATION
Installing a C/CS ounting lens
1. Re ove the protective rubber cap fro the front of the ca era.
2. Install the ount ring for lens and adjust the ount ring to fit C or CS lens.
3. Tighten the setscrews using the hexa wrench in the package.
Installing an Auto IRIS lens
1. Re ove the cover of the auto iris lens plug and connect it with the lens cable.
2. Connect the auto iris lens plug to the 4-pin lens ter inal on the back of the ca era.
Note
i
Use the connection reco ended by the anufacturer. For best
perfor ance, read the lens anual carefully. You ay need to set the flange
back focus.
Note
i
Only DC-drive type is supported.
CW
SET SCREW
Set Screw
(For IRIS LENS)
CCW
CW
NVC/IPE Series IPE1100 Installation Guide
02A.02 UDP Technology Ltd. 10
4 pin connector for IRIS
PIN DC IRIS Lens
1 Da p-
2 Da p+
3 Drive+_
4 Drive-
2
1
4
3
Tabla de contenidos
Otros manuales de Cámara de seguridad de ERNITEC
ERNITEC
ERNITEC Orion DX 3 Manual de usuario
ERNITEC
ERNITEC MicroView MVCLOUD-201 Manual de usuario
ERNITEC
ERNITEC Hawk SX Manual de usuario
ERNITEC
ERNITEC Mercury SX4 series Manual de usuario
ERNITEC
ERNITEC DS-2CD6986F-H Manual de usuario
ERNITEC
ERNITEC MERCURY SX 5TH GENERATION Manual de usuario
ERNITEC
ERNITEC Corona IP-452 IR Manual de usuario
ERNITEC
ERNITEC ECB Series Manual de usuario
ERNITEC
ERNITEC SX Manual de usuario
ERNITEC
ERNITEC DS-2CD6924G0-IHS Manual de usuario
ERNITEC
ERNITEC Orion/2 Manual de usuario
ERNITEC
ERNITEC Orion/2 Manual de usuario
ERNITEC
ERNITEC DS-2XM6726G0-IS/ND Manual de usuario
ERNITEC
ERNITEC MicroView MVIB-04IR-E Manual de usuario
ERNITEC
ERNITEC Orion Manual de usuario
ERNITEC
ERNITEC Orion/2 Guía
ERNITEC
ERNITEC SX Series Manual de usuario
ERNITEC
ERNITEC MVID-04IR-E Manual de usuario
ERNITEC
ERNITEC Mercury SX32 Series Manual de usuario
ERNITEC
ERNITEC MicroView MVID-03IR-E Manual de usuario
