Elite Screens Kestrel Stage Series Manual de usuario

Rev080515 www.elitescreens.com 1

Kestrel Stage Series

Electric Floor Rising Projection Screen with Travel Case

User’s Guide

Rev080515 www.elitescreens.com 2

Product description

The Kestrel Stage Series is a portable electric floor rising front projection screen that is ideal for

event applications used in Churches, hotels, schools, or other like venues. It includes two travel cases

(one for the screen and one split-two-sided storage cart). Complete the set up by attaching the

complimentary drape kit to give your presentation the finishing touch.

Product parts and hardware

Upon receiving your screen, please make sure all parts listed below are included. If anything is

missing from the package, please contact Elite Screens Inc. right away.

1. Kestrel Stage Motorized screen

w/ travel case (main) X 1

2. Storage Cart X 1

3. Remote Control Wall Box X 1

4. Double sided bolt X 4

5. Butterfly Nut X 4

6. Ring-bolt X 1

7. Curtain fabric X 1

Product Assembly and Operation

1. Unlatch: Lift the butterfly locks and rotate them 90 degrees. Then, split the case open by pulling

both sides apart.

Note: Distance the two parts of the storage-box (item 2) to the corresponding length of the Kestrel’s

case. Then proceed to step 2.

Rev080515 www.elitescreens.com 3

2. Insert the shorter side of the double sided bolts (Item 4) into the bottom of the motorized

screen’s carry case as shown in the figure below. There should be two bolts (item 4) inserted

into each bottom side of the travel case of the motorized screen’s main case. Be careful to not

over-tighten the bolt to avoid damaging the threading in the screen’s carry case.

Safety precaution: We recommend that two people lift and mount the screen onto the cart.

3. Carefully place the main screen’s carry case on top ( facing the front) of the two separate carts by

inserting the longer side of the bolts in to the top front holes of the storage carts (item 2) as

shown below.

4. Using the provided butterfly nuts, tighten the bolts to secure the screen’s carry case to the carts

as shown in the figures below. Be careful to not over-tighten the butterfly nuts to avoid damage

to the threading in the screen’s carry case.

Rev080515 www.elitescreens.com 4

5. Insert the ring bolt into the indicated hole on the back of the main travel case to help avoid

damage to the cover hinges.

6. Connect the power cable and control box (item3)

7. Lock / unlock the wheel:

Push latch down to lock

Connect together

Rev080515 www.elitescreens.com 5

8. Affix the top edge (Velcro) of the curtain to the inner edges (front, left and right side edges) of

the storage case.

Note: The curtain will stick to the Velcro inside of the case.

Controls and Accessories for Kestrel Stage Series

A. IR Remote

B. RF Remote

C. 3-way Wall Switch

D. 5-12 volt trigger cable

E. IR extended “eye” receiver

F. AAA batteries

G. Bubble leveler

Screen Control System for Kestrel Stage Series

Electric Current information: The screen operates on AC110V @ 60 Hz

1. Plug the screen’s power cord into a power outlet.

2. Once the screen has power, you’ll be able to control it using any of the 4 methods

described below.

4 Ways to Control your Kestrel Stage Series

1) IR remote control (Item A) and IR “Eye” Receiver (Item E) : The IR remote control (fig.1)

requires line-of-sight to the IR sensor. The IR “eye” receiver must be connected to the

Remote Control Wall box in order for the IR remote control to function. The IR “Eye”

Receiver plugs directly into the screen’s RJ-45 input (fig.2).

The shaded area in this figure

indicates the location of the

Velcro inside of the box.

Rev080515 www.elitescreens.com 6

2) RF Remote Control (Item B): The radio waves eliminate the need for a direct line of sight

with a range of 100 feet.

3) 3-Way Wall Switch (Item C, Fig 3): The 3-way wall switch manually controls the screens

up/stop/down button by connecting directly into the screen’s RJ-45 port.

4) 5-12 volt trigger (Item D, Fig 4): The built-in 5-12V trigger input allows your screen to

synchronize its drop & rise with the projector’s power cycle. The screen deploys when the

projector powers up and will retract when the projector powers down. The 5-12 volt RJ45 cable

connects to your projector’s trigger output via a separate cable that may or may not be provided

by the manufacturer of the projector. The trigger feature will not work without an output cable

from the projector, but it can be tested by connecting the Red (+) and Green (-) cable to a 9-volt

battery.

For local Elite Screens contact or Technical Support, please visit

www.elitescreens.com

STOP

DOWN

3 Way Wall Switch

(does not have IR sensor)

Fig.3

Fig.2

Fig.1

IR/RF remote

Fig.4

Control box

Tabla de contenidos

Otros manuales de Pantalla de proyección de Elite Screens

Elite Screens

Elite Screens aeonclr series Manual de usuario

Elite Screens

Elite Screens Evanesce AcousticPro UHD Series Manual de usuario

Elite Screens

Elite Screens EDGE FREE Aeon Series Manual de usuario

Elite Screens

Elite Screens Elite Home Series Manual de usuario

Elite Screens

Elite Screens Spectrum Series Manual de usuario

Elite Screens

Elite Screens Evanesce B Series Guía de referencia rápida

Elite Screens

Elite Screens F100NWH Manual de usuario

Elite Screens

Elite Screens Elite Tripod Series Manual de usuario

Elite Screens

Elite Screens Yard Master 2 WraithVeil Dual Series Manual de usuario

Elite Screens

Elite Screens Evanesce B Series Manual de usuario

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Manual de usuario

Elite Screens

Elite Screens Saker Series Manual de usuario

Elite Screens

Elite Screens Manual Series Manual de usuario

Elite Screens

Elite Screens Elite ezFrame Series Manual de usuario

Elite Screens

Elite Screens Evanesce Tab-Tension ITE120HW2 Manual de usuario

Elite Screens

Elite Screens aeonclr series Manual de usuario

Elite Screens

Elite Screens GolfSim Bay Series Manual de usuario

Elite Screens

Elite Screens Home100IWH2-A Manual de usuario

Elite Screens

Elite Screens M92UWH Manual de usuario

Elite Screens

Elite Screens Pro Frame Thin DarkUST Series Manual de usuario

Elite Screens

Elite Screens CineTension 3 Series Manual de usuario

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Manual de usuario

Elite Screens

Elite Screens WhiteBoardScreen Series Manual de usuario

Elite Screens

Elite Screens CineTension Series Manual de usuario

Manuales populares de Pantalla de proyección de otras marcas

FART PRODUKT

FART PRODUKT Standard SCREEN Manual de usuario

Draper

Draper E Series Manual

Laarhoven

Laarhoven Companion II Manual de usuario

Renogy

Renogy RMS-LFPS-US Manual de usuario

Da-Lite

Da-Lite ExecutiveElectrol Manual de usuario

Samsung

Samsung S*H65* Manual de usuario

FONESTAR

FONESTAR PPTR-43100-FA Manual de usuario

Slide Clear

Slide Clear Varro XL Manual de usuario

OS РХ-090Н Manual de usuario

Niko

Niko 10-845 Manual de usuario

Speaka Professional

Speaka Professional 2357532 Manual de funcionamiento

Sima

Sima XL-72 Manual de usuario

Jasic

Jasic EVO 2.0 ET-200P Manual de usuario

InFocus

InFocus SC-WALL GRY-92H Manual

Barco

Barco OverView MVL-615 Manual de usuario

Draper

Draper Envoy Manual

SI Dynamic 2 XL Manual de usuario

Draper

Draper Nocturne+ E Instrucciones de instalación