Elite Screens EDGE FREE Aeon Series Manual de usuario

V150327 www.elitescreens.com 1

Aeon Series

EDGE FREE™Fixed Frame Projection Screen

User’s Guide

Applies to all available screen materials: CineGrey 3D EDGE FREE™and CineWhite EDGE FREE™

Product Description:

The Aeon Series is a fixed frame projection screen that uses Elite’s EDGE FREE™ technology. The EDGE

FREE™design resembles a giant size flat panel TV display. The Aeon includes a velvet tape as an installation

option to further enhance the frame appearance and absorb projector overshoot. An optional LED edge

backlighting kit is available for added visual appearance. For more information on the LED kit please visit:

http://www.elitescreens.com/led

Hardware and Parts List

Please make sure all parts listed below are included before installation.

A. Elbow joint x 4 pcs

B. Top/Bottom horizontal fame x 4 pcs

C. Left/Right vertical frame x 2 pcs

D. Center joints x 2 pcs

E. Center support bar x 1-2 pc

F. Wall brackets x2-3 pcs

G. M6 screw x 2-4 pcs

H. M5x15 screw x 24 pcs

I. M6x12 screw x 2-4pcs

J. M5x50 screws and anchor x 6 pcs

K. Rubber hammer x 1 pc

L. Screwdriver x1 pc

M. Velvet tape

V150327 www.elitescreens.com 2

Frame Assembly

Note: Refer to the section “Splicer Installation” if joining two or more frames.

1. Insert the center joint into one of the ½ horizontal frames and fasten it with the two M5x15 screws (H).

2. Insert the other ½ horizontal frame piece to the center joint and fasten also using two M5x15 screws.

3. Repeat steps 1 and 2 for assembling the second horizontal frame.

Push Push

4. Insert and slide in one M6 screws (G)through the channel located on the back each horizontal frame.

5. Insert the elbow joint (A) into each end of the horizontal frames (B)as shown below.

Horizontal long frame (B)

Elbow Joint (A)

Place one M6 hex screw (G) in the center for attaching the center support bar (E)

Horizontal long frame

Face up

M6 hex screws (G)

Horizontal frame

Center Joints

Top right Frame

Top left Frame

V150327 www.elitescreens.com 3

6. Insert the two vertical short frames (C) into the elbow joint (A).

7. Join the remaining horizontal long frame (B) with the frame built in the previous steps as shown below.

Horizontal long frame (B)

Vertical short frame (C)

Horizontal Long frame (B)

push

Vertical short frame (C)

V150327 www.elitescreens.com 4

8. Make sure all four corners are properly in place to form a perfect rectangle. Then fasten the four angles with

the M5x15 Screws (H).

Screen Material Installation

1. Lay the screen material completely flat with the front facing down on a clean surface in a horizontal position.

The back side of the screen material should be placed upwards.

Note: The back side of the material has the velcro borders all around the edges.

2. Carefully and gently place the assembled frame on top the screen material as shown below. Make sure to not

allow the angle edge of the frame to come in direct contact with the screen material to avoid puncturing it.

Four corners join correctly to form a perfect

rectangle. Use the included screwdriver (L)

to fasten the Mx15 screws (H) into each

corner by aligning the frame screw holes to

the holes in the elbow joint (A).

Screen material back facing up

Velcro

V150327 www.elitescreens.com 5

3. After all of the corners of the frame have been properly aligned, attach the material to the frame in the following

order A→B→C→D (see instructions below for details).

Attach the screen material to the corners as shown below.

4．After all four corners have been attached; please check whether the frame corners are wrapped by the screen

material. If not, please loosen the velcro connection and repeat the above steps so the frame is not exposed.

Note: The black shaded part represents the velcro on the frame. That Velcro

end will ultimately attach with the other velcro end on the screen material.

Note:

Represents the

screen material

2) Fold over and attach

material to the velcro

strip of the frame.

3) Fold over second side

and attach to frame

4) Repeat until all four

sides are done in the

order A, B, C, D

1) Stretch the screen

material in the direction

of the arrowhead.

V150327 www.elitescreens.com 6

5. Proceed to attach the rest of the material to the frame as described in the illustrations below.

Lay the Velcro end on the screen

material over the Velcro end of the

frame and keep it within the edge.

Proceed in the following sequence

below ①②

The key is to attach within the

middle sections of 1 and 2. Then

continue attaching the remaining

unattached areas.

Repeat the same steps on

remaining three sides in the

sequence A, B, C, D as show

below.

Grasp the middle of the screen

material and attach it to the velcro

strip on the frame

Attach in the following sequence: a-b-c-d

V150327 www.elitescreens.com 7

Screen Material Removal

Follow the steps to properly remove the screen material from the frame. This procedure will ensure prolonging the

life of the screen material.

1. Detach the velcro from the frame.

2. Gently pull back the material to release the material from the velcro connections on the corners

Support bar installation:

1. Position the center support bar (E) in the middle of the frame and align the hole on each end of the support bar

with the M6 hex screws (G)on the top and bottom frames. Then fasten with the M6x12 screws (I).

Move the M6 hex screw (G) to the middle area of the frames.

Align the M6 screws

with the two holes.

Pull back the screen material from

the velcro connection along the

edges of the frame to detach it.

Support bar

V150327 www.elitescreens.com 8

Notice to Installer:

These instructions only apply if you have the CineGrey 3D ALR material. Please use the following installation

instructions to obtain superior optical performance from the Angular Reflective ALR (Ambient Light

Rejecting) Screen.

Projector Ceiling Installation: Make sure the

projector (light in) is angled (ϴ1) to reflect (ϴ2) at

the mirror-opposite angle (light out) to align with

the viewer’s eye level.

Projector Table Top: Make sure the projector

(light in) is angled (ϴ1) to reflect (ϴ2) at the

mirror-opposite angle (light out) to align with the

viewer’s eye level.

Images are not up to scale and are for illustrations purposes only.

Note: Improper installation will result in light loss and produce a dark image. This is due to the projector’s light

reflecting in the wrong direction.

Velvet Tape Trim Installation

Attention: Installing the velvet trim will reduce the viewing size of your screen. See below illustrations for a

comparison of the viewing size of the before and after edge trim installation using the 100” & 120” 16:9 diagonal

models.

100”comparison:

120”comparison:

Before installing the trim strip

After installing the trim strip

Before installing the trim strip

V150327 www.elitescreens.com 9

1) Lay the assembled frame on its back on a clean surface.

2) Measure 10 mm (0.40”) from the edge of the frame to the inside of the material.

3) Make a light mark with a pencil approximately every 8-10 inches apart. This will help guide the way to making

a straight line for the velveteen strip.

4) Repeat steps 2 and 3 on the remaining sides

The Screen

10”

V150327 www.elitescreens.com 10

5) Peel off the backing on the velvet strip and align the top edge at the 10 mm mark.

6) Continue peeling off the backing until the other side has been reached. Make sure that the velvet strip is kept

straight the entire way.

7) Fold back the excess unused velveteen.

8) Repeat steps 5-7 to complete the velveteen strip installation.

Screen Material

10”

Otros manuales para EDGE FREE Aeon Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Pantalla de proyección de Elite Screens

Elite Screens

Elite Screens Starling Tab-Tension CLR 3 Series Manual de usuario

Elite Screens

Elite Screens Sable Frame B2 Series Manual de usuario

Elite Screens

Elite Screens DIY Screen Series Manual de usuario

Elite Screens

Elite Screens VMAX113XWS Manual de usuario

Elite Screens

Elite Screens Elite Silvermax Series Manual de usuario

Elite Screens

Elite Screens F100NWH Manual de usuario

Elite Screens

Elite Screens Raptor Series Manual de usuario

Elite Screens

Elite Screens Aeon CineGrey 3D AT Series Manual de usuario

Elite Screens

Elite Screens QuickFold Q100V Manual de usuario

Elite Screens

Elite Screens Kestrel FE100H Manual de usuario

Elite Screens

Elite Screens Manual Series Manual de usuario

Elite Screens

Elite Screens Kestrel Home Series Manual de usuario

Elite Screens

Elite Screens aeonclr series Manual de usuario

Elite Screens

Elite Screens Electric84H Manual de usuario

Elite Screens

Elite Screens WhiteBoardScreen Series Manual de usuario

Elite Screens

Elite Screens Kestrel Stage Series Manual de usuario

Elite Screens

Elite Screens Elite ES-M120UWV2 Manual de usuario

Elite Screens

Elite Screens Home100IWH2-A Manual de usuario

Elite Screens

Elite Screens F60XWV1 Manual de usuario

Elite Screens

Elite Screens Lunette Series Manual de usuario

Elite Screens

Elite Screens Spectrum Tension Series Manual de usuario

Elite Screens

Elite Screens TE100HC2 Manual de usuario

Elite Screens

Elite Screens ezFrame R180WH1 Manual de usuario

Elite Screens

Elite Screens Manual SRM Pro Series Manual de usuario

Manuales populares de Pantalla de proyección de otras marcas

FART PRODUKT

FART PRODUKT Standard SCREEN Manual de usuario

Draper

Draper E Series Manual

Laarhoven

Laarhoven Companion II Manual de usuario

Renogy

Renogy RMS-LFPS-US Manual de usuario

Da-Lite

Da-Lite ExecutiveElectrol Manual de usuario

Samsung

Samsung S*H65* Manual de usuario

FONESTAR

FONESTAR PPTR-43100-FA Manual de usuario

Slide Clear

Slide Clear Varro XL Manual de usuario

OS РХ-090Н Manual de usuario

Niko

Niko 10-845 Manual de usuario

Speaka Professional

Speaka Professional 2357532 Manual de funcionamiento

Sima

Sima XL-72 Manual de usuario

Jasic

Jasic EVO 2.0 ET-200P Manual de usuario

InFocus

InFocus SC-WALL GRY-92H Manual

Barco

Barco OverView MVL-615 Manual de usuario

Draper

Draper Envoy Manual

SI Dynamic 2 XL Manual de usuario

Draper

Draper Nocturne+ E Instrucciones de instalación