Dymo LabelManager 450D Manual de usuario

Follow these steps to install your LabelManager 450D label maker and print your first label.

1. Unpacking your Label Maker

x Do not connect the label maker into your computer until asked to do so during the software installation.

1Unpack your label maker and save the packing materials.

2Make sure you have all the items shown in Figure 1.

2. Connecting the Power

The label maker can operate on AC or battery power.

To connect the power adapter

1Plug the power adapter into the power connector on the top, left side

of the label maker.

2Plug the other end of the power adapter into a power outlet.

To insert the batteries

1Remove the battery compartment cover. See Figure 2.

2Insert the batteries following the polarity markings (+ and –).

3Replace the battery compartment cover.

1,2...n

Enter

987

Clear

Cancel

CAPS

SPACE

–+

Shift Shift

Language

Settings

Memory

Insert

Preview Symbols

Figure 1

Warranty booklet

LabelManager 450D label maker

CD-ROM

D1 tape cassette

Quick Start Guide

USB cable

User Guide

Power adapter

Figure 2

Quick Start

3. Inserting the Tape Cassette

Your label maker comes with one label cassette. You can purchase

additional tape cassettes from your local office supply retailer.

To insert the tape cassette

1Press and release the tape cassette cover to open the tape

compartment. See Figure 3.

x The first time you use the label maker, remove the protective

cardboard insert from the tape exit slot. See Figure 4.

2Make sure the tape and ribbon are taut across the mouth of the cassette

and that the tape passes between the guideposts. If necessary, turn the

spool clockwise to tighten the ribbon.

3Insert the cassette and press firmly until the cassette clicks into place. See

Figure 5 and Figure 6.

4Close the tape cassette cover and press Ato turn on the power.

You are now ready to print your first label. For complete details on how to

use the label maker refer to the LabelManager 450D User Guide.

4. Installing the Software

x Do not connect the label maker to your computer until asked to do so

during the software installation.

To install the software on a Windows system

1Insert the DYMO Label Software CD into your CD-ROM drive. After a few

seconds, the installation screen appears. If the screen does not appear:

a. Click Start and then Run on the Windows taskbar. The Run dialog

box appears.

b. Enter D:\install.exe (where D is the letter of the CD-ROM drive)

and click OK.

2Select the language to install and follow the on-screen instructions.

To install the software on a Mac OS system

1Insert the DYMO Label Software CD into the CD-ROM drive.

After a few seconds, the DYMO Label Software Installer icon appears.

2Double-click the Installer icon and follow the instructions. See Figure 7.

If you do not see the label maker in the printer list when the installation is

complete, refer to the ReadMe file for instructions on how to add the label maker.

Figure 3

Remove

cardboard

insert

Figure 4

Figure 5

Click!

Figure 6

Figure 7

Produced by:

DYMO

Stamford CT 06902

800-426-7827: www.dymo.com

5. Connecting the Label Maker to your Computer

The label maker connects to your computer using the USB connection located on the top of the label maker.

x Do not connect the label maker to your computer until asked to do so during the software installation.

To connect the label maker to your computer

1Plug the USB cable into the USB port on the top of the label maker.

See Figure 8.

2When prompted by the software installer, plug the USB cable into a USB

port on your computer.

6. Printing Labels with DYMO Label Software

The following figure shows some of the many features available in DYMO Label Software.

For complete details on how to use the software, refer to the DYMO Label Software User Guide, located on

the DYMO Label Software CD-ROM, and the online Help.

Figure 8

Insert a picture, barcode,

date, or symbol.

Insert text you’ve copied

to the Clipboard.

Store your favorite

addresses in the Address

Book and automatically

insert them on your label.

If you also have a

LabelWriter printer, two

buttons allow you to easily

switch between the label

editor and tape editor.

To print your first label

1Start DYMO Label Software as follows:

•For Windows, click Start, then Programs>DYMO Label>DYMO Label.

•For Mac OS, double-click the DYMO Label icon in the folder where you installed the software.

The first time you open the application, you are asked to register. Follow the on-screen instructions.

2If you already have a LabelWriter printer installed, click to display the Tape Editor. Otherwise,

go to step 3.

3Type some text on the label.

4Choose a font and a style setting from the Formatting toolbar.

5Click to print the label.

6Use the cutter lever to cut the label.

Printing Multiple Labels from Other Applications

With DYMO Label Software, you can quickly print multiple labels from text

created in Microsoft® Word and Excel using Smart Paste. You can use Smart

Paste to print from the clipboard or a file.

To print multiple labels quickly from Microsoft Excel

1From Excel, copy a list of items to the clipboard.

2From DYMO Label Software, clickEdit>Smart Paste>From Clipboard.

Each item is automatically printed with cut-marks between each label.

3Use the cutter lever to cut the tape and use scissors to cut each label at the cut marks.

Congratulations! You are now ready to design and print labels.

Ordering Labels

Tape cassettes are available in a wide variety of sizes and styles. You can purchase tape cassettes from your

local office supply retailer or directly from DYMO. Visit www.dymo.com.

Copy to

clipboard

Pens Pencils Erasers Paper Ink

Produced by:

DYMO

Stamford CT 06902

800-426-7827: www.dymo.com

Otros manuales para LabelManager 450D

Tabla de contenidos

Otros manuales de Etiquetadora de Dymo

Dymo

Dymo LabelWriter 4XL Label Printer Manual de usuario

Dymo

Dymo LabelWriter 550 Manual de usuario

Dymo

Dymo Rhino 4200 Industrial Label Printer Manual de usuario

Dymo

Dymo LabelPOINT 100 Manual de usuario

Dymo

Dymo LabelWriter 450 Duo Label Printer Manual de usuario

Dymo

Dymo RhinoPRO 6000 Manual de usuario

Dymo

Dymo Label Blaster Guide Manual de usuario

Dymo

Dymo LabelManager 420P Manual de usuario

Dymo

Dymo LetraTag XR Manual de usuario

Dymo

Dymo LabelManager Wireless PnP Manual de usuario

Dymo

Dymo LabelManager 350D Manual de usuario

Dymo

Dymo 1752265 Manual de usuario

Dymo

Dymo LM100+ Manual de usuario

Dymo

Dymo ExecuLabel LM450 Manual de usuario

Dymo

Dymo LabelPOINT 100 Manual de usuario

Dymo

Dymo Rhino 5200 Hard case Kit by Manual de usuario

Dymo

Dymo LetraTag Manual de usuario

Dymo

Dymo LabelManager 260P Manual de usuario

Dymo

Dymo Omega Manual de usuario

Dymo

Dymo LabelWriter 310 Manual del propietario

Dymo

Dymo Rhino Pro 5000 Manual de usuario

Dymo

Dymo LabelManager Series Guía de instalación

Dymo

Dymo LlM 100+ Manual de usuario

Dymo

Dymo LetrTAG QX50 Manual de usuario

Manuales populares de Etiquetadora de otras marcas

Brother

Brother P-Touch 2420PC Manual de usuario

newell

newell Dymo LabelManager 210D Manual de usuario

Brother

Brother TD-4000 Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Brother

Brother E300 Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

Brother

Brother P-touch PT-9700PC Manual de usuario

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario