Digitus DS-53200 Manual de usuario

VGA over IP EXTENDER

Manual

DS-53200

1. Introduction

Thanks for purchasing the DS-53200 VGA over IP Extender. We recommend that you read

this manual thoroughly and retain for future reference.

1.1 Features

The VGA over IP Extender allows you to extend video and audio up to 100 meters distance

between source or computer and monitor or projector. With the built-in video and audio

signals enhancement, you can gain the best video resolution quality and audio stereo sound

while listening, and no any additional software needed. Furthermore, the installation and

operation are easily more than expected. With using extension facilities of video and audio,

this product the VGA over IP Extender,delivers worthy of performing efficiency and

value-added.

Cascadable Receiver, each Receiver Unit with cascade function enables to link the

other two Receiver Units consecutively extending another 100m distance, and continue

expanding corresponding to custom demand as likely Cascade/Tree Chain web

architecture spread

Easy to install with inexpensive CAT.5e/6 cables

Each pair (TX & RX) extends the signals up to 100m (330 feet)

Supports video high resolution up to 1920x1080@60Hz, Full HD 1080p

HDTV compatible (720p, 1080i, 1080p)

Supports Stereo 2.0

Cascaded-chainable receiver up to 10 layers

Supports RS-232 (Serial)

IR (Infrared remote) enabled

Support Local VGA monitoring port

Each receiver (remote) distributed linking cascade-chainable 2 receivers

Wall Mountable

1.2 Package Contents

1. VGA Extender Transmitter (TX) x 1

2. VGA Extender Receiver (RX) x 1

3. Audio cable x 1

4. RS232 adapter cable x 2 pcs (set units) or 1 ( single unit)

5. IR ( Emitter + Receiver ) cables x 1 set

6. Power Adaptor DC 5V x 2 pcs ( set units ) or 1 ( single unit )

7. User’s Manual x 1

2. Specifications:

2.1 General

Transmitter Receiver

Console

Connectors

VGA Output VGA (Female) VGA (Female)

RS-232 Control

Port Phone Jack Phone Jack

Connectors VGA Input VGA (Male) N/A

Extension

Port RJ-45 Full HD Video / Audio Extension

RJ-45 1 (Line Out) 3 (1 Line In & 2 Line Out)

Cascaded-Chainable N/A Up to 10 layers

Audio Supports Stereo 2.0

IR Unidirectional (Receiver RX to Transmitter TX)

LED

Indicators

Local

Power Red LED

Link Red Green

Remote

Power Red LED

Link Red Green

DDC Supported DDC/ DDC2 /DDC2B

Extension Cable Type &

Length CAT.5e / CAT.6 Max. Length: 100m

Max. Video Resolution HDMI: 1920 x 1080@60Hz, Full HD 1080p

Wide Screen Supported yes

Power Supply External DC 5V / 2A Power Adapter

Dimension ( L x W x H ) 115 x 91 x 28 mm

Weight 340g 380g

Housing material Metal

Power Consumption Transmitter (TX) : 5W ; Receiver (RX): 4.5W

Operating Temperature 32 – 122 F ( 0 – 50 C )

Working Temperature -20 ℃~ 60 ℃

Humidity 0% - 80% RH

3. Connectors Diagram

3.1 Configuration Pictures

: Power adapter DC 5V :Audio-out port

:Power LED (Solid Red when power present) :Local VGA monitoring

:Link LED (Solid Green when link present) :VGA source

:IR Emitter control port :Audio-in port

: RS232 control port :RJ45 CAT.5e/6 UTP port

: Power adaptor DC5V :Audio-out port

:Power LED (Solid Red when power present) :VGA output ( remote display)

:LINK LED (Solid Green when link present) :RJ45 LINK

:IR receiver control port :RJ45 LINK

: RS232 control port :RJ45 LINK

Transmitter(TX)–FrontView Transmitter(TX)–RearView

Receiver(RX)–FrontView Receiver(RX)–RearView

Application Diagram

Transmitter (TX) Installation

Please use CAT.5e/6 cable to get the best quality to connect to

the LINE port (RJ45) of Transmitter

Connect the IR Blaster Emitter cable or RS-232 to 3.5mm adapter to the Transmitter Unit IR

Port or RS-232 port if necessary

Connect Transmitter with VGA cable to a VGA source

Connect Transmitter with VGA cable to a VGA monitor

Connect DC 5V power adapter

Connect to UTP cable

Connect to local VGA monitor

Connect to local speaker Connect to VGA source

Power Adapter 5V Connect to audio source

Receiver (RX) Installation

Please use CAT.5e/6 cable to get the best quality to connect to the LINE1 or LINE2 or

LINE3 port (RJ45) of Receiver

Connect the IR Receiver cable or RS-232 to 3.5mm adapter to the Receiver Unit IR Port or

RS-232 port if necessary

Connect Receiver with VGA cable to a VGA monitor

Connect DC 5V/2A power adapter.

Cascade Chain Connection

Use UTP Cable to connect with Receiver to link the other two Receiver Units consecutively

for extending another 100m distance, the cable is to connect to Receiver LINE1 or LINE2

or LINE3 port (RJ45), as long as the LINE port is not occupied, and user can continue

expanding corresponding to custom demand as likely Cascade/Tree Chain web

architecture spread

Connect the IR Receiver cable or RS-232 to 3.5mm adapter to the Receiver Unit IR Port or

RS-232 port if necessary

Connect Receiver with HDMI cable to HDMI connector of Display Monitor

Connect DC 5V power adapter

Connect to VGA monitor

Connect to speaker

Power Adapter 5V Connect to UTP cable

Connect to VGA monitor

Connect to UTP cable

Connect to speaker

Power Adapter 5V

Each Receiver with three Line port, one is used for source input; others are used for expanding

source to other receivers. User can choose any LINE port as source input random and use the

other two LINE port for expanding source to next tier receiver as long as the LINE port is not

occupied.

Network Switch Extending

The maximum distance between each tier could be up to 100 meters long, while this could

be extended through Network Switch. User can add one Network Switch to extend another

100 meter

The more Network Switches, the longer distance extended. The number of Network

Switches can be as many as user want

3.2 Connection Diagram

(1) Single Source Extension

(2) Single Source Extension and Receivers Cascade Chaining

(3) Single Source with Multiple Receivers Cascaded

VGA Cable

Cascaded and mixed with VGA / HDMI / DisplayPort

IR Bypass function connection

Connect the IR Transmitter (or Emitter) cable to the IR Connector on the Transmitter (TX)

Connect the IR Receiver cable to the IR Connector on the Receiver (RX)

Place the IR Eye of the IR Receiver cable near the Remote Controller

Place the IR Blaster of the IR Transmitter cable near the device that intend to be controlled

by the Remoter controller

GA Out

3.3 RS-232 Bypass function connection

Connect the device, such as a PC, projector…etc, to the RS-232 port of the Transmitter or

Receiver via a RS-232 to 3.5mm adatper

Connect the controlling device to the RS-232 port of the Receiver or Receiver via a RS-232

to 3.5mm adapter

Tabla de contenidos

Otros manuales de Extensor de Digitus

Digitus

Digitus DS-51201 Manual de usuario

Digitus

Digitus DN-95126 Manual de usuario

Digitus

Digitus DC-52101 Manual de usuario

Digitus

Digitus DS-55516 Manual de usuario

Digitus

Digitus DS-55321 Manual de usuario

Digitus

Digitus DN-651143 Manual de usuario

Digitus

Digitus DS-55517 Manual de usuario

Digitus

Digitus DS-55204 Manual de usuario

Digitus

Digitus DC-51101-LOCAL Manual de usuario

Digitus

Digitus DS-55202 Manual de usuario

Digitus

Digitus DS-53440 Manual de usuario

Digitus

Digitus DS-55522 Manual de usuario

Digitus

Digitus DS-55519 Manual de usuario

Digitus

Digitus DS-55505 Manual de usuario

Digitus

Digitus DN-95128-1 Manual de usuario

Digitus

Digitus DS-55506 Manual de usuario

Digitus

Digitus DA-70139-2 Manual de usuario

Digitus

Digitus DS-55129 Manual de usuario

Digitus

Digitus DS-55100 Manual de usuario

Digitus

Digitus DS-55316 Manual de usuario

Digitus

Digitus DS-55520 Manual de usuario

Digitus

Digitus DS-55508 Manual de usuario

Digitus

Digitus DS-55101 Manual de usuario

Digitus

Digitus DS-54901 Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario