Dell Inspiron 20 Manual de usuario
Inspiron 20
Service Manual
Computer Model: Inspiron 20 Model 3043
Regulatory Model: W13B
Regulatory Type: W13B001
Notes, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better
use of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Copyright ©2014 Dell Inc. All rights reserved. This product is protected by U.S. and
international copyright and intellectual property laws. Dell™and the Dell logo are trademarks
of Dell Inc. in the United States and/or other jurisdictions. All other marks and names
mentioned herein may be trademarks of their respective companies.
2014 - 05
Rev. A00
Contents
Before Working Inside Your Computer.....................................7
Before You Begin .............................................................................................. 7
Safety Instructions..............................................................................................7
Recommended Tools........................................................................................ 8
After Working Inside Your Computer......................................10
Technical Overview...................................................................... 11
Inside View of Your Computer.........................................................................11
System Board Components ............................................................................12
Removing the Hard Drive........................................................... 14
Procedure.........................................................................................................14
Replacing the Hard Drive............................................................18
Procedure.........................................................................................................18
Removing the Back Cover.......................................................... 19
Prerequisites.....................................................................................................19
Procedure........................................................................................................ 20
Replacing the Back Cover..........................................................24
Procedure........................................................................................................ 24
Post-requisites ................................................................................................24
Removing the Control-Buttons Board....................................25
Prerequisites.....................................................................................................25
Procedure.........................................................................................................25
Replacing the Control-Buttons Board....................................27
Procedure.........................................................................................................27
Post-requisites................................................................................................. 27
Removing the Wireless Card..................................................... 28
Prerequisites.................................................................................................... 28
Procedure........................................................................................................ 28
Replacing the Wireless Card..................................................... 30
Procedure........................................................................................................ 30
Post-requisites.................................................................................................30
Removing the Power-Status Light Board...............................31
Prerequisites..................................................................................................... 31
Procedure.........................................................................................................31
Replacing the Power-Status Light Board...............................33
Procedure.........................................................................................................33
Post-requisites ................................................................................................ 33
Removing the Speakers.............................................................. 34
Prerequisites.....................................................................................................34
Procedure ....................................................................................................... 34
Replacing the Speakers...............................................................36
Procedure ....................................................................................................... 36
Post-requisites.................................................................................................36
Removing the System Board......................................................37
Prerequisites.....................................................................................................37
Procedure ....................................................................................................... 38
Replacing the System Board......................................................42
Procedure........................................................................................................ 42
Post-requisites.................................................................................................43
Entering the Service Tag in the BIOS..............................................................43
Removing the Coin-Cell Battery.............................................. 44
Prerequisites.................................................................................................... 44
Procedure........................................................................................................ 45
Replacing the Coin-Cell Battery.............................................. 46
Procedure........................................................................................................ 46
Post-requisites.................................................................................................46
Removing the Memory Module................................................ 47
Prerequisites.....................................................................................................47
Procedure........................................................................................................ 48
Replacing the Memory Module................................................ 49
Procedure........................................................................................................ 50
Post-requisites.................................................................................................50
Removing the Heat Sink..............................................................51
Prerequisites..................................................................................................... 51
Procedure.........................................................................................................52
Replacing the Heat Sink..............................................................53
Procedure.........................................................................................................53
Post-requisites ................................................................................................ 53
Removing the Display Assembly...............................................54
Prerequisites.....................................................................................................54
Procedure........................................................................................................ 54
Replacing the Display Assembly...............................................58
Procedure........................................................................................................ 58
Post-requisites.................................................................................................58
Removing the Antenna............................................................... 59
Prerequisites.....................................................................................................59
Procedure........................................................................................................ 59
Replacing the Antenna................................................................62
Procedure........................................................................................................ 62
Post-requisites.................................................................................................62
Removing the Camera................................................................ 63
Prerequisites.....................................................................................................63
Procedure........................................................................................................ 63
Replacing the Camera.................................................................65
Procedure........................................................................................................ 65
Post-requisites.................................................................................................65
Removing the Display Bezel......................................................66
Prerequisites.................................................................................................... 66
Procedure........................................................................................................ 66
Replacing the Display Bezel...................................................... 68
Procedure........................................................................................................ 68
Post-requisites.................................................................................................68
Flashing the BIOS......................................................................... 69
Getting Help and Contacting Dell........................................... 70
Self-Help Resources........................................................................................70
Contacting Dell................................................................................................70
Before Working Inside Your
Computer
CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.
NOTE: The images in this document may differ from your computer
depending on the configuration you ordered.
Before You Begin
1 Save and close all open files and exit all open applications.
2 Shut down your computer.
– Windows 8.1: On the Start screen, click or tap the power icon →
Shut down.
– Windows 7: Click or tap Start → Shut down.
NOTE: If you are using a different operating system, see the
documentation of your operating system for shut-down
instructions.
3 Disconnect your computer and all attached devices from their electrical
outlets.
4 Disconnect all cables such as telephone cables, network cables and so
on, from your computer.
5 Disconnect all attached devices and peripherals, such as keyboard,
mouse, monitor, and so on, from your computer.
6 Remove any media card and optical disc from your computer, if
applicable.
7 After the computer is unplugged, press and hold the power button for 5
seconds to ground the system board.
Safety Instructions
Use the following safety guidelines to protect your computer from potential
damage and ensure your personal safety.
7
WARNING: Before working inside your computer, read the safety
information that shipped with your computer. For more safety best
practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
WARNING: Disconnect all power sources before opening the
computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to
the power source.
CAUTION: To avoid damaging the computer, make sure that the work
surface is flat and clean.
CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.
CAUTION: Only a certified service technician is authorized to remove
the computer cover and access any of the components inside the
computer. See the safety instructions for complete information about
safety precautions, working inside your computer, and protecting
against electrostatic discharge.
CAUTION: Before touching anything inside your computer, ground
yourself by touching an unpainted metal surface, such as the metal at
the back of the computer. While you work, periodically touch an
unpainted metal surface to dissipate static electricity, which could
harm internal components.
CAUTION: When you disconnect a cable, pull on its connector or on
its pull-tab, not on the cable itself. Some cables have connectors with
locking tabs or thumb-screws that you must disengage before
disconnecting the cable. When disconnecting cables, keep them
evenly aligned to avoid bending any connector pins. When connecting
cables, make sure that the ports and connectors are correctly oriented
and aligned.
CAUTION: To disconnect a network cable, first unplug the cable from
your computer and then unplug the cable from the network device.
CAUTION: Press and eject any installed card from the media-card
reader.
Recommended Tools
The procedures in this document may require the following tools:
8
• Philips screwdriver
• Flat-head screwdriver
• Plastic scribe
9
After Working Inside Your
Computer
CAUTION: Leaving stray or loose screws inside your computer may
severely damage your computer.
1 Replace all screws and make sure that no stray screws remain inside your
computer.
2 Connect any external devices, peripherals, and cables you removed
before working on your computer.
3 Replace any media cards, discs, and any other part(s) that you removed
before working on your computer.
4 Connect your computer and all attached devices to their electrical
outlets.
5 Turn on your computer.
10
Otros manuales para Inspiron 20
9
Tabla de contenidos
Otros manuales de De oficina de Dell
Dell
Dell Dimension 5150 Manual de usuario
Dell
Dell Dimension T2310 Manual de usuario
Dell
Dell XPS 625 Manual de usuario
Dell
Dell Inspiron 5680 Manual de operación y mantenimiento
Dell
Dell OptiPlex 3020 Manual de usuario
Dell
Dell W32C Manual de usuario
Dell
Dell Precision 650N Manual de usuario
Dell
Dell OptiPlex 0F1697A00 Manual de usuario
Dell
Dell Vostro 410 Manual del operador
Dell
Dell Inspiron 530 Series Instrucciones de funcionamiento y seguridad
Dell
Dell OptiPlex GX60 Manual de usuario
Dell
Dell Inspiron 3670 Manual de usuario
Dell
Dell Dimension 8400 Series Manual de usuario
Dell
Dell Inspiron 20 Manual de usuario
Dell
Dell Dimension XPS H266 Manual de usuario
Dell
Dell PRECISION WCM Manual técnico
Dell
Dell XPS 8910 Manual de usuario
Dell
Dell OptiPlex 5480 All-in-One Manual de usuario
Dell
Dell OptiPlex 81FTK Manual de usuario
Dell
Dell Inspiron 535s Manual de usuario
