D-Link DCS-936L Manual de usuario
DCS-936L
Quick Install Guide
HD Wi-Fi Camera
If any of the above items are missing, please contact your reseller.
DCS-936L HD Wi-Fi Camera
Power Adapter
Package Contents
Mounting Hardware
Minimum Requirements
Mobile Device (to use mydlink Lite app)
• iPhone, iPad, or Android smartphone or tablet
(Refer to the mobile app’s store page to see if your device is compatible)
Network Device and Service
• A wireless router (802.11n/g) with Internet service
• An e-mail account (required to create a mydlink® account)
Quick Install Guide
For warranty and regulatory information, please visit:
http://support.dlink.com/warranty.aspx
2
Product Overview
Camera Lens
Microphone
MicroUSB Power Connector
Reset Button
WPS Button
Front
Back
Camera Stand
Wi-Fi Signal Indicator
IR LEDs
microSD Card Slot*
(on side)
Power/Status LED
Light Sensor
* Supports microSD/SDXC up to 128GB
3
Setting Up Your Camera
System Requirements: Refer to the mydlink Lite app page on Apple App Store, Google Play or Windows Phone Store.
Launch the mydlink Lite app, then create a new account or log in to your existing
account. The app will guide you through the rest of the conguration process.
Download the free mydlink Lite app on your smartphone or tablet by scanning the
QR code below, or by searching for mydlink Lite in the app store for your device.
1
2
3
Note: If you experience issues registering this device with your mydlink account, or if you purchased an
open box or resold unit, perform a hard reset by pressing and holding the reset button on the device
for 10 seconds while the device is powered on. If you are returning the device, please perform the
hard reset procedure to clear the device of any personal data.
To ensure your product has the latest security updates and operates at optimal performance, it is
recommended you update your product to the latest rmware after installation and to periodically
check for new rmware releases. Updates can be found by searching your model name at http://
support.dlink.com or through the mydlink mobile apps for mydlink registered devices.
Before launching the app, make sure your mobile device is connected to the Wi-Fi
network (i.e., router) you want to connect the camera to.
Need help setting up your camera?
Watch the installation video.
Visit dlinksetup.com
4
Mount the Camera
Please refer to the steps below to assist you with mounting the camera.
We suggest that you congure the camera before mounting.
2. Place the camera base where you want to position
the camera and use a pencil to mark the holes. Make
sure that the cable channel on the camera base is
facing in the direction you want.
3. Depending on the material of the wall or ceiling, use
proper tools to drill two holes 25mm deep with a
6mm drill bit where you marked. If the wall is made
out of concrete, drill the holes first, then insert the
plastic anchors to support the screws.
4. Pull the power cable through the middle of the
camera base and through the cable channel as
shown.
1. Hold the base of the camera with one hand placing
your thumb on the tab, then press down on the
release buttons with your other hand and pull the
camera from the camera base.
5. Place the camera base over the holes that are in
the wall and use the supplied screws to attach the
camera base to the surface of the wall. Plug in the
microUSB power cable to the camera.
6. Attach the camera to the camera base and pull the
power cable to remove the extra cable. Adjust the
angle of the camera as desired.
1
2
3
4
5
6
5
1. What is a mydlink No.? What is it used for?
Each camera has a unique eight-digit mydlink No. which will be shown on
the label on the back of your camera. This eight-digit number identies
your device, and is required to add your device to your mydlink account.
2. What can I do if my DCS-936L is not working correctly?
• Reset the camera (see next step) and run the setup steps starting
on page 4 again.
• To make sure your hardware is installed correctly, make sure that:
- the power LED is green
- your Internet connection is working
- your router’s LAN & WAN connections are working
- your router supports UPnP®
- your camera is on the same network as your mobile device
- both your mobile device and camera have a working Internet connection
• If your camera is still not working, check your router and make sure it
has the latest rmware.
3. What can I do if I forget my password?
FAQs
If you forget your password, you must reset the
camera. Unfortunately, this process will change
your settings back to factory default. To reset the
camera, locate the reset button on the back of
the camera. With the camera powered on, use an
unfolded paper clip to hold the button down for
10 seconds. Run the setup procedure located on
page 4 once the camera restarts.
4. Why is there a white haze when viewing in night vision mode?
When viewing in night vision mode, the IR lights on the camera may be
reecting o a nearby surface. Try repositioning the camera in order to
avoid glare from IR LEDs.
Reset
Button
6
Notes
7
Technical Support
This guide is only for initial conguration. Please refer to the user
manual and FAQs at http://support.dlink.com/DCS-936L for more
information. Also feel free to contact us. U.S. and Canadian customers
can contact D-Link Technical Support through our website.
http://support.dlink.com
USA
http://support.dlink.ca
Canada
Version 1.02
March 16, 2017
Copyright ©2017 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Maximum
wireless signal rate derived from IEEE Standard 802.11n and 802.11g specications. Actual data throughput
will vary. Network conditions and environmental factors, including volume of network trac, building
materials and construction, and network overhead, lower actual data throughput rate. Environmental
factors will adversely aect wireless signal range. Product specications, size and shape are subject to
change without notice, and actual product appearance may dier from that depicted on the packaging.
Visit dlink.com (US) or dlink.ca (Canada) for more details.
Otros manuales para DCS-936L
7
Tabla de contenidos
Otros manuales de Cámara de seguridad de D-Link
D-Link
D-Link DCS-4701E-VB1 Manual de usuario
D-Link
D-Link DCS-2136L Manual de usuario
D-Link
D-Link DCS-8525LH Manual de usuario
D-Link
D-Link DCS-2130 Manual de usuario
D-Link
D-Link DCS?6010L Manual de usuario
D-Link
D-Link DCS-6517 Manual de usuario
D-Link
D-Link DCS-5010L Manual de usuario
D-Link
D-Link SECURICAM DCS-6511 Manual de usuario
D-Link
D-Link DCS-8620LH Manual de usuario
D-Link
D-Link DCS?6010L Manual de usuario
D-Link
D-Link SecuriCam DCS-6510 Manual de usuario
D-Link
D-Link DCS-7413 Manual de usuario
D-Link
D-Link DCS-3010 Manual de usuario
D-Link
D-Link DCS-7010L Manual de usuario
D-Link
D-Link DCS-936L Manual
D-Link
D-Link DCS-2210 Manual de usuario
D-Link
D-Link DCS-4201 Manual de usuario
D-Link
D-Link DCS-1201 Manual de usuario
D-Link
D-Link DCS-931L Cloud Camera 1050 Manual de usuario
D-Link
D-Link DCS-1201 Manual de usuario
