D-Link DCS-935L Manual de usuario

DCS-935L

Quick Install Guide

HD Wi-Fi Camera

If any of the above items are missing, please contact your reseller.

Minimum Requirements

DCS-935L HD Wi-Fi Camera

Wall Mount Kit

Package Contents

• A wireless router (802.11ac/n/g) with Internet service

• An e-mail account (required to create a mydlink® account)

Network Device and Service

Power Adapter

• Wireless 802.11ac/n/g network

(Wireless AC network recommended for optimum performance)

Quick Install Guide

Mobile Device

• iPhone, iPad, or Android smartphone or tablet

(Refer to the mobile app’s store page to see if your device is compatible)

Quick Install Card

Product Overview

Back

Reset Button

MicroUSB Power

Connector Power LED

WPS LED

& Button

Direct LED

& Button

Front

Camera Lens

IR LEDs

Camera Stand

Microphone

Light Sensor

ENGLISH

Setting Up Your Camera

Please follow the instructions below to set up your mydlink camera.

Congratulations, your DCS-935L is now ready to use! Be sure to check the

support.dlink.com website periodically for the latest rmware updates to keep

your product up to date with the latest features.

Note: If you experience issues registering this camera with your mydlink account, or if you

purchased an open box or resold unit, perform a hard reset by pressing and holding the reset

button on the device for 10 seconds while the device is powered on. If you are returning the

device to the place of purchase, please perform the hard reset procedure to clear the

device of any personal data.

On your mobile device, download mydlink Home by going to

mydlinkhomeapp.dlink.com, or by searching for mydlink Home in the

iTunes App Store or Google Play.

3After logging in, tap the Settings icon in the top-left corner, select

Add New Device, and follow the instructions.

When you are asked to scan a QR code, use the code on the Quick Install

Card in your package, or on the label attached to your device.

Launch the mydlink Home app and create a new account or sign in to

your existing account.

iOS: If you are asked about allowing the app to

access your location, select Allow.

Android: Make sure location services are turned on

in your phone’s settings.

Mounting the Camera

Please refer to the steps below to assist you with mounting the camera.

We suggest that you congure the camera before mounting.

1. Use a pencil to mark two points on the wall or

ceiling that are 40 mm (1.6 in) apart. Use a 6 mm

drill bit to drill the holes where you marked.

The holes should be 25 mm deep (about 1 in

deep). Insert the screws into the holes. When

you tighten the screws, leave 2 mm for tting

the mounting base over the screw-heads.

2. Place the mounting base over the screws that

are inserted in the wall or ceiling. Make sure to

t the screw-heads over the big holes in the

base, and slide the mounting base downward

to lock it rmly in place. Lightly pull the base

forward to make sure that it is locked. Adjust

the angle of the camera as needed.

Note: If the wall is made out of concrete, before inserting the screws, insert

the provided plastic anchors to support the screws.

ENGLISH

1. What is a mydlink No.? What is it used for?

Each camera has a unique eight-digit mydlink No. which will be shown on the

label on the back of your camera. This eight-digit number identies your device,

and is required to add your device to your mydlink account.

2. What can I do if my camera is not working correctly?

• To make sure your hardware is installed correctly, check to see if:

- the power LED is lit solid green

- your Internet connection is working

- your router’s wireless & WAN connections are okay

- your router supports UPnP®

- your mobile device is currently on the same wireless network as your camera

- both your mobile device and camera have a working Internet connection

• If your camera is still not working, check your router and make sure it has the

latest rmware.

3. What can I do if I forget my password?

If you forget your password, you must reset the

camera. Unfortunately, this process will change

your settings back to factory default and remove

it from your account. To reset the camera, locate

the reset button on the back of the camera. With

the camera powered on, use an unfolded paper

clip to hold the button down for 10 seconds. Once

the camera restarts, follow the steps in this guide

to set up your camera again.

4. Why is there a white haze when viewing in night vision mode?

When viewing in night vision mode, the IR lights on the camera may be reecting

o a nearby surface. Try repositioning the camera in order to avoid glare from

IR LEDs.

5. Can I use my DCS-935L as a portable camera?

Yes, to use the DCS-935L as a portable camera, you can power the camera with

a portable battery that supplies 5V/2A of power.

FAQs

Reset

Button

Technical Support

This guide is only for initial conguration. Please refer to the user manual to learn

more or visit http://www.mydlink.com for more information. Also feel free to

through our website.

http://support.dlink.com

USA

Ver. 1.02(NA)_90x130

March 20, 2015

29072600935LA17

other third party marks mentioned herein may be trademarks of their respective owners. Maximum wireless signal rate

derived from IEEE Standard 802.11ac, 802.11g, and 802.11n specications. Actual data throughput will vary. Network

conditions and environmental factors, including volume of network trac, building materials and construction, and

network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal

range. Product specications, size and shape are subject to change without notice, and actual product appearance may

dier from that depicted on the packaging. This publication may not be reproduced, in whole or in part, without prior

express written permission from D-Link Systems, Inc.

Canada

http://support.dlink.ca

Otros manuales para DCS-935L

Tabla de contenidos

Otros manuales de Cámara de seguridad de D-Link

D-Link

D-Link DCS-942L Manual de usuario

D-Link

D-Link DCS 6513 Manual de instalación y operación

D-Link

D-Link DCS-1130 - mydlink-enabled Wireless N Network... Manual de usuario

D-Link

D-Link DCS-3112 Manual de usuario

D-Link

D-Link DCS-1201 Manual de usuario

D-Link

D-Link BEYOND FIBER MSME SECURITY KIT Manual de usuario

D-Link

D-Link DCS-F4605EK Manual de usuario

D-Link

D-Link DCS-5222L Manual de usuario

D-Link

D-Link DCS-7517 Manual de usuario

D-Link

D-Link DCS-2670L Manual de usuario

D-Link

D-Link DCS-3411 Manual de usuario

D-Link

D-Link DCS-930 Manual de usuario

D-Link

D-Link DCS-6815 Manual de usuario

D-Link

D-Link DCS-6500HLV2 Manual de usuario

D-Link

D-Link DCS-6004L? DCS-6005L Manual de usuario

D-Link

D-Link DCS-2136L Manual de usuario

D-Link

D-Link DCS-7513 Manual de usuario

D-Link

D-Link DCS-6112 Manual de usuario

D-Link

D-Link DCS-5010L Manual de usuario

D-Link

D-Link DCS-930L Manual de usuario

D-Link

D-Link DCS-8627LH Manual de usuario

D-Link

D-Link DCS-6100LHV2 Manual de usuario

D-Link

D-Link DCS-3110 - SECURICAM Fixed Network Camera Manual de usuario

D-Link

D-Link DCS-6315 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario