D-Link DSL-504T Manual de usuario
2
DSL-504T User’s Manual
D-Link Systems, Inc.
Table of Contents
Table of Contents
Table of Contents ...............................................................................................2
Package Contents .............................................................................................. 4
Installation Overview ......................................................................................... 5
Installation Requirements ..................................................................................6
Information you will need from your ADSL service provider ..............................8
Information you will need about your DSL-504T ADSL service router ............... 9
Information you will need about your LAN or computer ................................... 10
Introduction .....................................................................................................11
Features and Benefits .......................................................................................12
Standards Compatibility & Compliance ........................................................... 14
Front Panel Display .......................................................................................... 16
Rear Panel Connections ................................................................................... 17
Hardware Installation .......................................................................................18
Power ON Router ............................................................................................. 19
Network Connections ....................................................................................... 20
Basic Router Configuration ..............................................................................22
Access the Configuration Manager ................................................................... 29
Login to the Home Page .................................................................................. 30
Configure the Router ........................................................................................ 31
Using the Setup Wizard ................................................................................... 33
Configuring the WAN connection ..................................................................... 46
LAN IP Settings ............................................................................................... 55
DHCP Server Settings ......................................................................................56
DNS Server Settings ........................................................................................58
3
DSL-504T User’s Manual
D-Link Systems, Inc.
Advanced Settings ...........................................................................................60
Tools ................................................................................................................72
Status ..............................................................................................................79
Multiple Virtual Connections ............................................................................ 83
Technical Specifications ..................................................................................85
Appendix A: IP Address Setup ......................................................................... 87
Appendix B: IP Concepts ................................................................................. 90
Appendix C: Microfilters & Splitters ................................................................. 93
Contacting Technical Support ..........................................................................95
Warranty ..........................................................................................................96
Registration .....................................................................................................99
Table of Contents
4
DSL-504T User’s Manual
D-Link Systems, Inc.
Package Contents
Package Contents
D-Link DSL-504T
ADSL Ethernet Router
One twisted-pair telephone cable used for ADSL connection
One straight-through Ethernet cable
Manualon CD
QuickInstallationGuide
One AC power adapter
If any of the above items are missing, please contact your reseller.
5
DSL-504T User’s Manual
D-Link Systems, Inc.
Installation Overview
The procedure to install the Router can be described in general terms in the following
steps:
1. Gatherinformationandequipment neededto installthe device.Before youbegin
the actual installation make sure you have all the necessary information and
equipment.
2. Install the hardware, that is, connect the cables (Ethernet and telephone) to the
device and connect the power adapter.
3. Check the IP settings on your computer and change them if necessary so the
computer can access the web-based software built into the Router.
4. Use the web-based management software to configure the device to suit the
requirements of your ADSL account.
6
DSL-504T User’s Manual
D-Link Systems, Inc.
Installation Requirements
Inordertoestablish aconnectiontotheInternet itwillbenecessaryto provideinformation
to the Router that will be stored in its memory. For some users, only their account
information (Username and Password) is required.For others, various parameters that
control and define the Internet connection will be required.You can print out the two
pages below and use the tables to list this information.This way you have a hard copy
of all the information needed to setup the Router. If it is necessary to reconfigure the
device, all the necessary information can be easily accessed. Be sure to keep this
information safe and private.
Low Pass Filters
Since ADSL and telephone services share the same copper wiring to carry their
respectivesignals,a filteringmechanismmaybe necessarytoavoidmutual interference.
A low pass filter device can be installed for each telephone that shares the line with the
ADSL line.These filters are easy to install passive devices that connect to the ADSL
device and/or telephone using standard telephone cable. Ask your service provider for
more information about the use of low pass filters with your installation.
Operating Systems
The DSL-504T uses an HTML-based web interface for setup and management.The
web configuration manager may be accessed using any operating system capable of
runningwebbrowsersoftware,includingWindows98SE,WindowsME,Windows2000,
and Windows XP.
Web Browser
Any common Web browser can be used to configure the Router using the web
configuration management software.The program is designed to work best with more
recently released browsers such as Opera, Microsoft Internet Explorer® version 5.0,
Netscape Navigator® version 4.7, or later versions. The web browser must have
JavaScript enabled. JavaScript is enabled by default on many browsers. Make sure
JavaScript has not been disabled by other software (such as virus protection or web
user security packages) that may be running on your computer.
Ethernet Port (NIC Adapter)
Any computer that uses the router must be able to connect to it through the Ethernet
port on the Router. This connection is an Ethernet connection and therefore requires
thatyourcomputerbeequippedwith anEthernetportas well.Mostnotebookcomputers
are now sold with an Ethernet port already installed. Likewise, most fully assembled
desktop computers come with an Ethernet NIC adapter as standard equipment. If your
computer does not have an Ethernet port, you must install an Ethernet NIC adapter
before you can use the Router. If you must install an adapter, follow the installation
instructions that come with the Ethernet NIC adapter.
7
DSL-504T User’s Manual
D-Link Systems, Inc.
Additional Software
It may be necessary to install software on your computer that enables the computer to
access the Internet. Additional software must be installed if you are using the device a
simple bridge. For a bridged connection, the information needed to make and maintain
the Internet connection is stored on another computer or gateway device, not in the
Routeritself.
If your ADSL service is delivered through a Dynamic, PPPoE/PPPoA, Static, or Bridge
connection, the information needed to establish and maintain the Internet connection
can be stored in the Router.In this case, it is not necessary to install software on your
computer.Itmay howeverbenecessaryto changesomesettings inthe device,including
account information used to identify and verify the connection.
All connections to the Internet require a unique global IP address. For bridged
connections, the global IP settings must reside in aTCP/IP enabled device on the LAN
side of the bridge, such as a PC, a server, a gateway device such as a router or similar
firewall hardware.The IP address can be assigned in a number of ways.Your network
service provider will give you instructions about any additional connection software or
NIC configuration that may be required.
8
DSL-504T User’s Manual
D-Link Systems, Inc.
Information you will need from your ADSL service provider
Username This is the Username used to log on to your ADSL service provider’s
network.It is commonly in the form - user@isp.com.Your ADSL service
provider uses this to identify your account.
Password This is the Password used, in conjunction with the Username above, to
log on to your ADSL service provider’s network.This is used to verify the
identity of your account.
Connection
Protocol This is the method your ADSL service provider uses to send and receive
data between the Internet and your computer.Your Modem supports the
followingconnectionprotocols:Dynamic,PPPoE/PPPoA, Static,orBridge.
Protocol This is the method your ADSL service provider will use to verify your
Username and Password when you log on to their network.Your Modem
supports the PAP and CHAP protocols.
VPI This is theVirtual Path Identifier (VPI). It is used in conjunction with the
Virtual Channel Identifier (VCI) below, to identify the data path between
your ADSL service provider’s network and your computer.
VCI This is the Virtual Channel Identifier (VCI). It is used in conjunction with
the VPI above to identify the data path between your ADSL service
provider’s network and your computer.
9
DSL-504T User’s Manual
D-Link Systems, Inc.
Information you will need about your DSL-504T ADSL router
Username ThisistheUsernameneededaccessthe Modem’smanagementinterface.
When you attempt to connect to the device through a web browser you
will be prompted to enter this Username.The default Username for the
Modem is admin.This is a default setting and can NOT be changed.
Password This is the Password you will be prompted to enter when you access the
Modem’s management interface.The default Password is admin.This
may be changed by the user.
LAN
Subnet
Mask for
the
DSL-504T
This is the subnet mask used by the DSL-504T, and will be used
throughout your LAN. The default subnet mask is 255.255.255.0. This
can be changed later.
LAN IP
addresses
for the
DSL-504T
This is the IP address you will enter into the Address field of your web
browser to access the Modem’s configuration graphical user interface
(GUI) using a web browser.The default IP address is 192.168.1.1 and it
is referred toas the“ManagementIP”address inthis User’s Manual.This
may be changed to suit any IP address scheme the user desires.This
address will be the base IP address used for DHCP service on the LAN
when DHCP is enabled.
10
DSL-504T User’s Manual
D-Link Systems, Inc.
Information you will need about your LAN or computer
Ethernet NIC If your computer has an Ethernet NIC, you can connect the
DSL-504T to this Ethernet port using an Ethernet cable.You can
also use the Ethernet port on the DSL-504T to connect to other
Ethernet devices, such as a Wireless Access Point.
DHCP Client
status Your DSL-504T ADSL Modem is configured, by default, to be a
DHCP server.This means that it can assign an IP address, subnet
mask, and a default gateway address to computers on your LAN.
The default range of IP addresses the DSL-504T will assign are
from 192.168.1.2 to 192.168.1.254.Your computer (or computers)
needs to be configured to Obtain an IP address automatically
(that is, they need to be configured as DHCP clients.)
It is recommended that your collect and record this information here, or in some other
secure place, in case you have to re-configure your ADSL connection in the future.
Once you have the above information, you are ready to setup and configure your
DSL-504T ADSL Router.
The Modem may be reset to its factory default settings by performing a
Restore settings operation within the management interface (see System
Commands). If you cannot gain access to the management interface, you
may opt to use the Reset button on the rear panel of the device).
Otros manuales para DSL-504T
9
Tabla de contenidos
Otros manuales de Enrutador de red de D-Link
D-Link
D-Link DWR-M960 Manual de usuario
D-Link
D-Link DI-LB60 Manual de usuario
D-Link
D-Link Express Ethernetwork DI-704P Manual de usuario
D-Link
D-Link DIR-825/AC Manual de usuario
D-Link
D-Link DIR-809 Manual de usuario
D-Link
D-Link DIR-130 - Broadband VPN Router Manual de usuario
D-Link
D-Link DIR-806A Manual de usuario
D-Link
D-Link DIR-825/GF Manual de usuario
D-Link
D-Link DSL-224 Manual de usuario
D-Link
D-Link DES-1024D Manual de usuario
D-Link
D-Link DSL-2740U Manual de usuario
D-Link
D-Link DIR-651 Manual de usuario
D-Link
D-Link DIR-825M Manual de usuario
D-Link
D-Link DIR-516 Manual de usuario
D-Link
D-Link DSL-2600U Manual de usuario
D-Link
D-Link DES-1008FX Manual de usuario
D-Link
D-Link DGS-1510/ME Series Manual de usuario
D-Link
D-Link DIR-816 Manual de usuario
D-Link
D-Link DIR-655 - Xtreme N Gigabit Router Wireless Manual de usuario
D-Link
D-Link DVG-7044S Manual de usuario
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad