D-Link DSL-504G Manual de usuario

Modem Conguration Guide

Dlink DSL 504G

Conguring in Layer2 PPPoE for Windows XP and 2000

CONTENTS

1. Network Conﬁguration

2. Restore Router To Factory Defaults

3. Re-conﬁgure In Layer2 PPPoE

4. Optional

Please note: Some screen shots may differ due to different versions of

ﬁrmware used. Please have your router powered on and connected directly

to your PC via Ethernet cable before you begin

1. NETWORK CONFIGURATION

PPPoE connection does not require you to have an IP address or DNS

settings manually encoded on your network card. PPPoE connection uses

authentication to establish the Internet connection and its after doing this

that your router is assigned an IP and DNS settings from TPG.

To begin, your PC needs to receive a private IP address from the router.

Most ADSL routers have DHCP enabled by default that will take care of this.

To ensure your Network Card is ready for this please follow the following

steps:

A. Click on Start -> Settings ->Control Panel -> Network Connections

B. Find your Network Card then right click on this and select Properties

C. Double click on Internet Protocol TCP/IP

Dlink DSL 504G

D. Ensure “Obtain an IP address automatically” is selected

E. Ensure “Obtain DNS server address automatically” is selected

F. Click on OK

2. RESTORE ROUTER TO FACTORY DEFAULTS

PLEASE NOTE: By doing this step you will be deleting any

additional customised settings (if applicable) in your router, for

example port forwarding. You can change the conﬁguration of

your router to PPPoE without restoring the router to factory

defaults in which case please skip this step and proceed

from step 3 however if you experience Internet problems after

competing the setup, we recommend you do perform step 2

then proceed from step 3

A. Make sure your router is powered on and connected to your

PC (Network card) via Straight through Ethernet cable

B. Use a paper clip to depress the reset button at the back of

your router for 10 seconds and release. At this point the reset

is in progress. Please do not power off the unit

C. When the indicator lights return steady, the reset is complete.

Your router is now at factory defaults

3. RE-CONFIGURE IN LAYER 2 PPPOE

A. Open your browser and in the address bar type http://10.1.1.1

and press enter.

B. When prompted enter admin as the username and password.

If your router is not at factory defaults and you have changed

the login credential, please enter the current username

and password for your router interface. If you do not get a

prompt, turn off the power on the modem and turn back on

after which you need to try again to browse to http://10.1.1.1

C. Click on the Run Wizard button

Modem Conguration Guide Dlink DSL 504G

D. The following screen will appear, click Next

E. Set the Admin Password on the router, for defaults type

admin in both the Password and Verify Password

ﬁelds. This password is used whenever you log into the

router so it is important you remember what it is.

Click Next

F. Choose the correct time setting and click Next

Modem Conguration Guide Dlink DSL 504G

G. Choose PPPoE/PPPoA and click Next

H. Please ﬁll in/ select the following ﬁelds:

• Username: - <TPGusername>@L2TP.tpg.com.au

for Fixed IP plans OR - <TPGusername>@PPP.tpg.

com.au for Dynamic IP plans

(e.g. adsl1234@L2TP.tpg.com.au)

• Password: Your Password by default is the same as

your <TPGusername> however if you have changed

your password since registration time, please use your

current TPG password

• VPI: 8

• VCI: 35

• Connection Type: PPPoE LLC

Click Next

I. Click the Restart button

J. Wait for the router to reboot

Modem Conguration Guide Dlink DSL 504G

13 14 23tpg.com.au/support

PLEASE NOTE:

ADSL routers will by default be capable of automatic authentication. This means your router will use your credentials you

have provided to make the Internet connection. Each time your router is powered on, it will initialize this automated

authentication process after which your router will receive a public IP address (ﬁxed or dynamic depending on your plan) and

DNS settings from TPG.

K. Click the Exit button

L. Your router has now been reconﬁgured and is ready to be used

M. To browse websites, please now launch your browser

4. OPTIONAL

You router:

If you had other services setup on your router like port forwarding and you had restored your router to factory defaults

before conﬁguring in PPPoE, please now reconﬁgure these functions to your current router settings.

Other Additional Services:

If you are reconﬁguring your router from Layer 3 to Layer 2 PPPoE and you also had other services like web server, mail

server, VPN etc that were dependent on your old Layer3 IP address, please ensure that appropriate reconﬁguration is

done to allow normal services to resume.

Modem Conguration Guide Dlink DSL 504G

Otros manuales para DSL-504G

Tabla de contenidos

Otros manuales de Módem de D-Link

D-Link

D-Link DCM-201 Manual de usuario

D-Link

D-Link DSL-321B Manual de usuario

D-Link

D-Link DCM-712 Manual de usuario

D-Link

D-Link DSL-2544N Guía de configuración

D-Link

D-Link DSL-526B Manual de usuario

D-Link

D-Link DSL-124 Manual de usuario

D-Link

D-Link DSL-300T Manual de usuario

D-Link

D-Link DWA-182 Manual de usuario

D-Link

D-Link Machine Connect 2.0 DWM-311 Manual de usuario

D-Link

D-Link DSL-2320B - 24 Mbps DSL Modem Manual de usuario

D-Link

D-Link DSL-200 - 8 Mbps DSL Modem Manual de usuario

D-Link

D-Link DSL-504T Manual de usuario

D-Link

D-Link DVA-2800 Manual de usuario

D-Link

D-Link DWM-156 Manual de usuario

D-Link

D-Link DSL-302G Manual de usuario

D-Link

D-Link DU-562M Manual de usuario

D-Link

D-Link DCM-200 Manual de usuario

D-Link

D-Link DSL-320B Manual de usuario

D-Link

D-Link DSL-260I Manual de usuario

D-Link

D-Link DSL-300CV Manual de usuario

D-Link

D-Link DWR-910M Manual de usuario

D-Link

D-Link DHP-W310AV Manual de usuario

D-Link

D-Link DSL-2890AL Manual de usuario

D-Link

D-Link DSL-200 Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario