D-Link Securicam Network DCS-2000 Manual de usuario

Audio Internet Camera

Manual

Building Networks for People

Version 3.40

DCS-2000

(10/04/04)

Contents

Contents of Package.......................................................................................3

Introduction......................................................................................................4

Features and Benefits .....................................................................................4

Connections ....................................................................................................6

HardwareInstallation .......................................................................................8

Installation Wizard...........................................................................................9

Installation Wizard Screen ............................................................................14

Enabling UPnP for Windows XP/Me..............................................................17

InstallingIP surveillance Software .................................................................21

Testing the DCS-2000 ...................................................................................25

Security .........................................................................................................26

Using and Configuring the DCS-2000 with a Router .....................................27

Using the DCS-2000 with an Internet Browser..............................................33

Record Snapshots to your FTP server with Motion Detection.......................58

Using IP surveillance Software......................................................................62

Installing IP surveillance Software .....................................................62

Launcher ..........................................................................................67

Monitor Program................................................................................70

Scheduling.........................................................................................95

Playback Program............................................................................103

Schedule Video Recording with Motion Detection .......................................118

Appendix......................................................................................................121

FrequentlyAsked Questions............................................................121

How to PINGYour IPAddress..........................................................124

Reset and Restore ..........................................................................125

I/O Connector ..................................................................................126

Adjusting the Camera’s Focus ........................................................130

Replacing the Lens..........................................................................131

Technical Specifications ..................................................................132

Contacting Technical Support .....................................................................134

TimeZoneTable ..........................................................................................135

Warranty......................................................................................................137

Registration .................................................................................................140

D-Link DCS-2000 Internet Camera

 Power Adapter

 Installation software and manual on CD

Quick Installation Guide

 Camera Stand

 Category 5 Ethernet Cable

Note: Using a power supply with a different voltage than the one included with the

DCS-2000 will cause damage and void the warranty for this product.

Minimum System Requirements:

 Internet Explorer 6.x or higher Internet Web Browser

CPU: 1.7GHz or above

(Pentium 4, 2.4Ghz plus processor with 512Mb memory and a

32Mb video card is required for multiple camera viewing and

recording in IP Surveillance)

Memory Size: 128MB

VGA card resolution: 800 x 600 or above

Package Contents

If any of the above items are missing, please contact your reseller.

Introduction

Supports a Variety of Platforms

Supporting TCP/IP networking, SMTP e-mail, HTTP and other Internet related

protocols, the DCS-2000 can be integrated easily into other Internet/Intranet

applicationsbecause of itsstandards-basedfeatures.

Broad Range ofApplications

Withtoday’s high-speed Internetservices, the InternetCamera can providethe

ideal solution for live video images over the Intranet and Internet for remote

monitoring. The DCS-2000 allows remote access from your Internet Explorer

Webbrowserforliveimageviewingandallowstheadministratortomanageand

controltheInternetCameraanywhereandanytimeintheworld.ApplytheInternet

Camera to monitor various objects and places such as homes, offices, banks,

hospitals,child-care centers, amusement parks and other varieties of industrial

andpublicmonitoring.TheInternetCameracanalsobeusedforintruderdetection

withitsmotion-detectionmode,capturestillimagesandvideoimagesforarchiving

andmanymoreapplications.

TheD-Link SECURICAMNetworkTMDCS-2000 InternetCameraisafullfeatured

surveillance system that connects to an Ethernet, Fast Ethernet or broadband

Internet connection to provide remote high-quality video and audio. The DCS-

2000 Internet Camera differs from a conventional PC Camera because it is a

stand-alone system with a built-in CPU and Web server providing a low-cost

solution capable of solving demanding security and home/office monitoring

needs. The DCS-2000 can be accessed remotely, and controlled, from any PC

or notebook computer over the Internet from anywhere in the world. Simple

installation procedures, along with the built-in Web-based interface offers easy

integration to your network environments.

Features and Benefits

TheSECURICAMNetworkTMDCS-2000 InternetCameraisastand-alonesystem

requiring no special hardware or software such as PC frame grabber cards.

Allthatisrequiredisacomputer with the InternetExplorerWebbrowser(version

6.x or above). Just plug in the camera and view the picture from your Internet

Camera with a valid IPAddress.

Web Configuration

Using the Internet Explorer Web browser, administrators can configure and

manage the Internet Camera directly from its own Web page via the Intranet or

the Internet. Up to 20 user names and passwords are permitted, with privilege

settingscontrolled by the administrator.

Features & Benefits (continued)

Powerful Surveillance and Remote Monitoring Utility

The powerful IP surveillance software application assigns an administrator

with a pre-defined user ID and password who can modify the Internet Camera

settings from the remote site via an Intranet or the Internet.Administrators are

allowed to monitor the image, record the image to a hard drive, and take

snapshots.

Connection to External Devices

Supporting auxiliary Input/Output connectors, you can connect the Internet

Camera toavarietyofexternaldevicessuchasIR-sensors,switchesandalarm

relays.Combinedwithprogrammablealarmingfacilities,youcandevelopavariety

of security applications that are triggered on alarm-based events. The Internet

Cameraprovidesanindustrystandardin/outexternalconnectorforconnectivity.

Note: Use of audio or video equipment for recording the image or voice of a

person without their knowledge and consent is prohibited in certain states or

jurisdictions. Nothing herein represents a warranty or representation that the

D-Linkproductprovidedhereinissuitablefortheend-user’sintendeduseunder

theapplicable laws of his or her state. D-Link disclaims any liability whatsoever

foranyend-useruse of the D-Link product,whichfails to comply with applicable

state, local, or federal laws.

Connections

Ethernet Cable Connector

The DCS-2000 back panel features an RJ-45 connector for connections to

10Base-TEthernet cabling or 100Base-TX Fast Ethernet cabling. This network

portsupportsthe NWay protocol, allowing theInternetCameratoautomatically

detect or negotiate the transmission speed of the network.

Reset Button

Reset will be initiated when the reset button is pressed once and held until the

Power LED flashes through its cycle twice.

EthernetCable Connector

DCPowerConnector

I/OConnector

ResetButton

DC Power Connector

The DC power input connector is located on the DCS-2000 Internet Camera’s

back panel and is labeled DC 12V with a single socket to supply power to the

InternetCamera.

Factory reset will be initiated when the reset button is pressed continuously

for 5 seconds or when the Power LED changes from green to red for 2

cycles. (For example you will see the LED turn to red twice, release the

reset button when the LED turns red the second time). The Power LED will

begin to flash indicating that the Internet Camera’s settings are reverting

back to the factory settings, then turn back to green. To reset the camera,

press the reset button once, and the LED will flash to orange.

TheEthernet cable included with the DCS-2000 Internet

Camerais a Category 5 “straightthrough” cable. This is

the recommended cable type when the camera is

connected to a 100 Mbps Fast Ethernet network hub or

switch.

The DCS-2000 provides a terminal block with two pairs of connectors situated

on the back panel. One pair is for input and the other is for output. The I/O

connectors provide the physical interface to send and receive digital signals to

a variety of external alarm devices. Please refer to the appendix in this

manual for detailed information.

Connections (continued)

Located on the bottom panel of the DCS-2000, the socket is used to connect

the camera stand to the Internet Camera by attaching the screw head on the

camerastand to the InternetCamera.

Bottom Panel

Socket for stand

PowerLED

LED stands for Light-Emitting Diode.

The Power LED is positioned on the right side of the Internet Camera lens.As

soon as the power adapter is connected to the Internet camera the power LED

will flash red and green several times, the DCS-2000 is conducting a

self-test. Upon passing the self-test the LED will turn green to indicate a good

connectiontoan Ethernet port or red to indicate no connectionhasbeen made.

I/O Connector

Attachment socket for the Camera Stand

Hardware Installation

Connect an Ethernet cable

Connect an Ethernet cable to the network

cableconnectorlocated ontheDCS-2000’s

back panel and attach it to the network.

Attach the external power supply

Attachtheexternalpowersupply to the DC

power input connector located on the

DCS-2000’s back panel labeled 12VDC

andconnecttheotherendtoyourwalloutlet.

TheInternetCameracomeswithacamera

stand with a swivel ball screw head that

can be attached to the Internet Camera

bottom socket cavity. Attach the camera

stand to the Internet Camera and station it

for your application. There are holes

located in the base of the camera stand

allowingtheInternetCameratobemounted

to the ceiling, or any wall securely.

Attaching the Internet Camera to the Camera Stand

When you have a proper connection, the LED will turn from red to green. The

light may cycle on and off and your computer may show an intermittent loss of

connectivity,this is normal untilyou have configured your InternetCamera.

Installation Wizard

After you have successfully completed the hardware installation of the DCS-

2000 InternetCamera,itisnecessary toinstallsoftwaretoconfigureandoperate

the camera. The first step is to install the Installation Wizard from the CD.

Installation Wizard will allow you to configure the Internet Camera to your

network.

After the Installation Wizard software program is completed, you will have an

operating and controllable Internet Camera. From your Internet Explorer Web

browseryouwillbe abletoaccessthevideoandsoundfromtheInternetcamera.

The camera has a built-in Web server.This Web server will allow the camera to

access the Internet without being attached to a computer and permits users to

view the video and audio remotely.

AfterrunningtheInstallation Wizard,you will be able to operate theDCS-2000

and view the camera remotely through Internet Explorer 6.x or above.

Howeveritisnecessaryto install the IP surveillance softwarefromtheenclosed

CDto create atruly powerful monitoringand surveillance system.The following

section will show in detail the installation of the Installation Wizard and the IP

surveillance software.

Installing the Installation Wizard program

Insert the CD that is included with the DCS-2000 Internet Camera. The

DCS-2000 installation menu will start up automatically from the CD. If the CD

does not start up automatically (the Windows operating system can turn this

function off, for example), go to Start > Run >Type D:\Autorun (if D:\ is your cd-

rom drive) to access the installation menu shown below:

Click Install Software

Installation Wizard (continued)

Click Installation Wizard

Please wait while the

InstallShield Wizard

prepares to install.

Click Next.

Otros manuales para Securicam Network DCS-2000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara IP de D-Link

D-Link

D-Link DCS-1000 Manual de usuario

D-Link

D-Link DCS-933L Cloud Camera 1150 Manual de usuario

D-Link

D-Link DCS-2121 - SECURICAM Network Camera Manual de usuario

D-Link

D-Link DCS-6620G - Network Camera Manual de usuario

D-Link

D-Link SECURICAM Network DCS-6620 Manual de usuario

D-Link

D-Link Cloud Camera 2330L Manual de usuario

D-Link

D-Link DCS-1000 Manual

D-Link

D-Link SECURICAM Network DCS-2100+ Manual de usuario

D-Link

D-Link SECURICAM Network DCS-2120 Manual de usuario

D-Link

D-Link SECURICAM Network DCS-900 Manual de usuario

D-Link

D-Link SECURICAM DCS-910 Manual de usuario

D-Link

D-Link SECURICAM Network DCS-2100+ Manual de usuario

D-Link

D-Link SECURICAM NETWORK DCS-5300 Manual de usuario

D-Link

D-Link SECURICAM Network DCS-950 Manual de usuario

D-Link

D-Link WIRELESS G DCS-950G Manual de usuario

D-Link

D-Link DCS-930L Guía de seguridad

D-Link

D-Link DCS-6220G Manual de usuario

D-Link

D-Link SECURICAM Network DCS-5300W Manual de usuario

D-Link

D-Link SECURICAM Network DCS-900 Manual de usuario

D-Link

D-Link WIRELESS G DCS-950G Manual de usuario

D-Link

D-Link Securicam Network DCS-2000 Manual de usuario

D-Link

D-Link DCS-5020L Manual

D-Link

D-Link DCS-6620G - Network Camera Manual de usuario

D-Link

D-Link DCS-1000 Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario