D-Link DCS-1000 Manual de usuario

Package Contents:

•One D-Link DCS-1000 Internet Camera

•One Installation CD-ROM

•One AC power adapter

•One Camera Stand

•One Category 5 Ethernet Cable

Note: If any of the contents are missing, please contact your reseller.

System Requirements

•Java Enabled and Compliant Web Browser

•CPU: Pentium II, 266 MHz or above

•Memory Size: 32 MB (64 MB recommended)

•VGA card resolution: 800x600 or above

Hardware Installation

•Connect an Ethernet Cable

Connect an Ethernet cable to the

network cable connector located on

DCS-1000’s rear panel and attach it to

the network.

We suggest using the Ethernet port to

configure the DCS-1000 and then

install the camera in its correct

location. Doing so will allow easy

installation and proper

configureation.

•Attach the External Power Supply

Attach the external power supply to

the DC power input connector located

on the DCS-1000’s rear panel and is

labeled DC 5V and connect it to your

local power supply.

Note: Confirm power source is

supplied from the LED indicators

label “Power” on the DCS-1000.

Configuring the IP address on your PC

The instructions contained in this section are intended for users of

Windows Me, 98 and 95. Please refer to the documentation for your

specific operating instructions for details on changing the IP address of

your computer so that you can access and configure the DCS-1000.

If your computer already uses an IP address of 192.168.0.x, please skip to

the next section.

•With your computer on,

open the Control

Panelby clicking the

Start button, select

Settings, and click on

Control Panel.

•Find and Double Click

the Network Icon

•Under the configuration

tab, find and double

click TCP/IP for the

network adapter used to

configure the DCS-1000.

•Please make note of the

IP Address settings so

that you can change

these settings back after

the cofniguration of the

DCS-1000is complete.

•Select Specify an IP

address and type

“192.168.0.x” (the

number “x” can be

replaced with any

number that will not

conflict with other

devices on your

network). If your

network does not already

use the 192.168.0.x IP

address scheme, then

using the number “5” as

shown below will work.

•Click the “OK” button.

Windows may copy files

needed to complete your

settings.

•When asked, restart the

PC. If you are not asked,

restart your PC manually.

Configuring the DCS-1000

•Using your favorite web browser, type “http://192.168.0.20” in the address

box (the default IP address is 192.168.0.20)Press Enter.

•The Welcome screen of the DCS-1000 will appear. Click “System

Administration” to access and change system settings.

•In the “Computer Name” field, type a name of your choosing that relates to

the camera or its location.

•In the “Location” field, type a description of your choosing.

•In the “Admin” field, type a username that will be used as the Administrator

account. We highly recommend that you change this setting now to enable

the highest security for the camera.

•Type a unique Admin Password into the “Admin Password” and “Confirm

Password” fields.

•In the Manually Assign section, input the correct settings for this camera into

the “IP Address”, “SubnetMask” and “Default Gateway” fields. If you

are not sure what these settings should be, please contact your network

adminstrator to determine the correct settings.

•The Default Gateway is the IP address of your Router. This settings allows

the DCS-1000 to be seen from the public Internet.

•Next, type in the “DNS IP Address” of your Domain Name System servers

into the cooresponding fields. These settings will be detirmined by your ISP.

•In the LED Control Settings section, choosing one of the following:

§Normal: Lights operate normally.

§OFF: Lights will stay off.

§Dummy: Lights will operate randomly.

•Refer to the Manaul for instructions on how to use the “Loading Active X

From” setting.

•The Open Second Port section is reqired to be used when installing a DCS-

1000 on a network with a public web server. Please refer to the Manual for

detailed information regarding this feature.

•Press the Save button to save the settings.

•The camera is now configured to work on your network. If you were

required to change the IP address of a computer on your network to make

these changes to the camera, you may now change the settings back to their

original settings.

•For instructions and details related to other settings related to System

Administration settings, please refer to the Manual.

Accessing the Streaming Video

•Using your favorite web browser, type “http://address” in the address box

where address is the IP address that you assigned to the camera from the

previous section. Press Enter.

•The Welcome screen of the DCS-1000 will appear. Click on “View Image–

Java Mode” from the Home screen to access the streaming video.

•Next, you will want to adjust the focus of the lens. To do this, turn the lens

slowly in either clockwise or anti-clockwise direction until the desired image

appears. DO NOT over-turn the lens in either of the directions as it will be

out of focus. Unless you want to substitute the lens DO NOT unscrew more

than 1.0mm apart from the Fixed Lens Assembly.

•To help you get the best image quality, keep in mind that while adjusting the

DCS-1000's focus you can preview the image quality from your Web

browser.

Tips and Technical Support

Tips

§If you are installing several cameras, it may be easier to use one

computer to configure all of them before you install them into the

planned location.

§Make sure that you have the latest version of Java installed on your

computer to ensure proper operating when viewing the video in Java

mode. Java can be downloaded for free from Sun’s website

(http://www.sun.com/download/).

§Refer to the manual located on the CD-ROM for additional information

regarding all features and instructions related to the DCS-1000.

§If problems arise when installing the camera or viewing the video,

please refer to the Appendix section of the Manual for troubleshooting

tips. If the Manual does not answer your questions, please refer to the

D-Link technical support web page described in the next section.

Technical Support

D-Link provides free technical support for customers within the United

States during the warranty period. U.S. customers can contact D-Link

Technical Support through our web site, e-mail or by phone.

D-Link Technical Support over Telephone:

1-800-758-5489

24 Hours a Day, 7 Days a Week

D-Link Technical Support over the Internet:

support.dlink.com

[email protected]

If you are a customer residing outside of the United States, please refer to

the list of D-Link locations that is included in the User’s Manual.

Notes:

Building Networks for People

http://www.dlink.com

Otros manuales para DCS-1000

Tabla de contenidos

Otros manuales de Cámara IP de D-Link

D-Link

D-Link SECURICAM Network DCS-900W Manual de usuario

D-Link

D-Link DCS-5000L Manual de usuario

D-Link

D-Link DHA-390 Manual de usuario

D-Link

D-Link DCS-942L Manual de usuario

D-Link

D-Link DCS-960L Manual de usuario

D-Link

D-Link DCS-5030L Manual de usuario

D-Link

D-Link DCS-6220G Manual de usuario

D-Link

D-Link DCS-942L Manual

D-Link

D-Link DCS-3420 Manual de usuario

D-Link

D-Link DCS-2330L Manual de usuario

D-Link

D-Link DCS-930-A2 Manual de usuario

D-Link

D-Link SECURICAM Network DCS-2120 Manual de usuario

D-Link

D-Link SECURICAM Network DCS-5300W Manual de usuario

D-Link

D-Link DCS-1000 Manual de usuario

D-Link

D-Link SECURICAM Network DCS-2120 Manual de usuario

D-Link

D-Link SECURICAM Network DCS-6620 Manual de usuario

D-Link

D-Link DCS-5020L Manual

D-Link

D-Link DCS-2330L Manual de usuario

D-Link

D-Link DCS-1000 Manual

D-Link

D-Link DCS-5020L Manual

D-Link

D-Link WIRELESS G DCS-950G Manual de usuario

D-Link

D-Link DCS-1000 Manual de usuario

D-Link

D-Link DCS-2121 - SECURICAM Network Camera Manual de usuario

D-Link

D-Link SECURICAM Network DCS-6620 Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario