CYP PU-107 Manual de usuario
PU-107
Pure Digital V1.3 HDMI over
Single CAT6 Transmitter &
Receiver Set
OPERATION MANUAL
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20100317 Preliminary release
Table of Contents
1
1
1
1
2
3
3
3
4
4
5
1. Introduction ……………………..……………………...…........….…….
2. Applications …………………..………………….……...................…..
3. Package Contents ………………………...........……….................…
4. System Requirements ……………..……….........………............…….
5. Features …………………………………………......……........…...……
6. Specications ………………………………...……..........………....….
7. Operation Controls and Functions ……………...……..............……
7.1 Front Panel ..............................................................................
7.2 Rear Panel .…………………………………..…….......…...….…
8. Connection and Installation ….………………….........…..…..…......
9. Acronyms …......................................................................................
1. Introduction
The HDMI 1.3 transmitter and receiver over ONE CAT 6 is an extend tool for
your long distance HDMI display. Instead of using expansive HDMI cable,
your existing CAT 6 cables/sockets also can perform the same functions like
transfer Deep Color (12 bits/color) video and new lossless compressed (Dolby
TrueHD, Dolby Digital Plus and DTS-HD Master Audio) Digital audio, with a
bandwidth up to 225MHz. The HDMI 1.3 Transmitter and receiver, over ONE
CAT6 extender is your substantial HDMI extender tool.
2. Applications
Long distance HDMI signal distribution
Showroom display
Hypermarket display
Lecture room display
3. Package Contents
HDMI v1.3 Transmitter x 1
HDMI v1.3 Receiver x 1
5V DC Power Supply adaptor x 2
Operation Manual x 1
4. System Requirements
Input HDMI source equipment and output HDMI display with connection
cables and one CAT6 cable.
1
5. Features
Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards.
Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/
color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio) Digital audio .
Supports one CAT-6 cable for data/DDC transmission.
Supports equalize and recover incoming TMDS data before re-
transmitting them with optimal quality regardless of the incoming signal
quality.
Supports high definition resolution, the cable distance test with
1080p/12bits resolution the HDMI Input/Output source can run up to
10/10 meters. If 1080p/12bits resolution the CAT6 Input/Output source
can run up to 45/15 meters.
Support CEC bypass.
Support xvYCC
2
6. Specifi cations
Frequency Bandwidth 2.25Gbps (single link)
Transmitter
Input/Output Ports 1 x HDMI Female port/1 x CAT6
Receiver
Output/Input Ports 1 x HDMI Female port/1 x CAT6
Power Supply 5V/ 1A DC (US/EU standards, CE/FCC/UL
certifi ed)
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) 78.5 (W) x 72 (D) x 30 (H) / each
Weight(g) 90 / each
Chassis Material Aluminum
Silkscreen Color Silver
Power Consumption TX: 3.5w ; RX: 2w
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (non-condensing)
7. Operation Controls and Functions
7.1 Front Panel
CH-107TX CH-107RX
① ②
DC 5V
HDMI INPUT
② ③
DC 5V HDMI OUT
① HDMI INPUT: This slot is where you connect the HDMI or DVI output
port of your source device such as a DVD player or Set-top-box with an
HDMI cable or connect the unit to another unit from the same product
family to extend your transmission over long distances.
② DC 5V: This slot is where you plug the 5V DC power supply into the unit
and connect the adaptor to an AC outlet.
3
PU-107TX PU-107RX
5. Features
Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards.
Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/
color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio) Digital audio .
Supports one CAT-6 cable for data/DDC transmission.
Equalizes and recovers incoming TMDS data before re-transmitting it in
optimal quality regardless of the incoming signal quality.
Cable testing showed that with 1080p 12bit resolution the HDMI input/
output source can be 10meters away.
Cable testing showed that with 1080p 12bit resolution the CAT6 input/
output device can be 45/15 meters away.
Support xvYCC
2
Black
3
③ HDMI OUTPUT: This slot is where you connect the HDMI or DVI input port of
your displayer such as HD TV or HD monitor or cascade to another
transmitter of the same family device to extend signal distance for display.
7.2 Rear Panel
CH-107TX CH-107RX
①
CAT6 OUT
①
CAT6 IN
① CAT6 OUT/IN: Connect the CAT6 output of transmitter with CAT6 cable to
the CAT6 input of the receiver.
Note:
A. Cable tested with CAT-6E/23AWG/Solid, using cables of another type
may result in a different operating distance.
B. Equipment used in cable distance testing included: PS3 20G, 37" Philips
8 bit LCD TV and 37" Samsung 12 bit LCD TV.
C. Figures provided in this manual are for reference only, actual
performance may depend on the source and display used along with
the type of cable.
8. Connection and Installation
DVD
HDMI
Cable
HDMI
Cable
CAT6
Cable
LCD TV
CH-107TX CH-107RX
HDMI
HDMI
HDMI
HDMI
4
Notes:
www.cypeurope.com
Otros manuales para PU-107
1
Tabla de contenidos
Otros manuales de Transmisor de CYP
CYP
CYP CH-2603TX Manual de usuario
CYP
CYP CH-103TX Manual de usuario
CYP
CYP CH-1602RX Manual de usuario
CYP
CYP VEX-X1102T-B0C Manual de usuario
CYP
CYP PUV-2100TX-AVLC Manual de usuario
CYP
CYP CH-1107 TX Manual de usuario
CYP
CYP AVX-101F-TX Manual de usuario
CYP
CYP PU-305BD-TX Manual de usuario
CYP
CYP CSI-8H8CVTX Manual de usuario
CYP
CYP CH-A320TX Manual de usuario
CYP
CYP PUV-1730PLTX-AVLC Manual de usuario
CYP
CYP CDPS-P313RTX Manual de usuario
CYP
CYP CH-507TXWPUS Manual de usuario
CYP
CYP EL-2600V Manual de usuario
CYP
CYP CH-2527TXPL Manual de usuario
CYP
CYP PUV-1630TXWP-UK Manual de usuario
CYP
CYP CH-2602TXWPUS Manual de usuario
CYP
CYP DCT-30TX Manual de usuario
CYP
CYP CH-1529TXV Manual de usuario
CYP
CYP CHDBT-1H3CE Manual de usuario
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
