CYP PUV-1630TTX Manual de usuario
OPERATION MANUAL
PUV-1630TTX
2x HDMI, 1x VGA over Single CAT5e/6/7 HDBaseT™
Table-Top Transmitter
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 11/02/2019 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................7
4. System Requirements ...........................7
5. Features..................................................7
6. Operation Controls and Functions.......9
6.1 Front Panel................................................... 9
6.2 Rear Panel...................................................10
6.3 WebGUI Control .......................................11
6.4 Serial Control (Via Receiver).................20
6.5 Telnet Control............................................20
6.6 RS-232 and Telnet Commands............21
7. Connection Diagram .......................... 36
8. Specifications...................................... 37
8.1 Basic Specifications.................................37
8.2 Video Specifications................................38
8.3 Audio Specifications...............................40
8.4 Cable Specifications ...............................41
8.5 HDBaseT Features....................................42
9. Acronyms............................................. 42
6
1. INTRODUCTION
The PUV-1630TTX is a brand new AV concept for the Commercial &
Corporate channel. Presentation equipment in corporate meeting rooms
can be dicult to operate and provide the user with challenges when
connecting their source to the installed AV system. Flexible meeting
rooms are also becoming more commonplace, which is where the
PUV-1630TTX provides the perfect balance between ease of use and
portability.
In collaboration with CMD the leading oce power and lighting
specialists, CYP has developed a dedicated HDBaseT switcher and
Transmitter that ts seamlessly into the CMD 'Contour' range. Providing
the user with a exible AV solution that removes the boundaries of how a
meeting space can be used.
The PUV-1630TTX Transmitter is a 2 x HDMI, 1 x VGA switch which allows
uncompressed HDMI and VGA signals to be transmitted over a Single
CAT5e/6/7 cable. This solution has the added features of analogue audio
em-bedding and a LAN connection over the same CAT5e/6/7 cable. These
combined HDMI and control signals can be transmitted up to lengths of
100 metres to a compatible PUV-1600 Series Receiver. When a device is
connected to the PUV-1630TTX, CEC control can be applied to 'power
up' the connected display and select the correct HDMI input channel
(programmed via the WebGUI).
This unit also supports automatic input detection between the HDMI
and the VGA inputs using hot plug detection, oering the user 'hands
free' control of the device. Despite the 10.2Gbps bandwidth limitation
of HDBaseT this clever transmitter will automatically convert signals of
higher bandwidths ensuring any HDMI 4KUHD signal can be passed
through the HDBaseT system. The unit also features push button control
on the front of the panel. The unit is powered by PoH supplied by a
compatible PUV-1600 series receiver.
7
2. APPLICATIONS
Household entertainment sharing and control
Lecture halls, auditoriums and classroom
Conference rooms and boardrooms
Hotel event spaces
3. PACKAGE CONTENTS
1×3 by 1 HDMI/VGA to HDBaseT Switcher
1×Operation Manual
4. SYSTEM REQUIREMENTS
HDMI or VGA source equipment such as media players, video game
consoles, PCs, or set-top boxes.
A compatible HDBaseT Receiver is required. An HDBaseT Receiver
capable of suppling 48V PoH is recommended.
The use of “Premium High Speed” HDMI cables, and industry standard
Cat.6, Cat.6a or Cat.7, is highly recommended.
8
5. FEATURES
Produced in collaboration with CMD
Supplied complete with the CMD 'Contour' unit, and C Clamp for
table-top xing
HDBaseT: High-Denition video and audio, 100BaseT Ethernet, PoH
(Power over HDBaseT)
HDMI 2.0 and DVI 1.0 compatible
HDCP 2.2 Compliant
2 x HDMI Input
1 x VGA Input with 3.5mm mini-jack analogue audio input
Automatic conversion of 4K @ 50/60Hz HDMI sources to 4K@30Hz
(4:4:4 8-Bit) for transmission over HDBaseT
Supports VGA input resolutions up to WUXGA (RGB)
PoH (Power over HDBaseT) Support
Auto Switching
CEC Control
Front panel push button control
Front panel LEDs to indicate Input Selection, link status and power
9
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PWR LINK HDCP VGA IN
LAN
PUV-1630TTX
INPUT
SELECT
VGA IN 1
AUDIO IN
HDMI IN 3
HDMI IN 2
1
7 8 9
2 3 4 5 6
1PWR LED: This LED will illuminate to indicate the unit is on and
receiving power.
2LINK LED: This LED will illuminate when the unit is on, receiving
power, and has successfully linked to a compatible Receiver.
3HDCP LED: This LED indicates the HDCP mode of the current input.
Green indicates Follow Display mode, orange indicates Follow Source
mode, off indicates HDCP support is disabled.
4VGA IN LED: This LED will illuminate when the VGA input is selected.
5INFO Button: A short press of this button will switch between the
available inputs. Pressing and holding this button for 2 seconds will
activate the information OSD.
6HDMI IN 1 & 2 Ports and LEDs: Connect to HDMI source equipment
such as a media player, game console or set-top box. The appropriate
LED will illuminate when that HDMI input is selected.
7VGA IN Port: Connect to VGA source equipment such as a PC or
laptop.
L/R IN Port: Connect to the stereo analogue output of a device such
as a CD player or PC for embedding into the HDBaseT output.
10
8FAC. RESET Pinhole: Press and hold for 5 seconds to reset the unit to
its factory defaults.
9LAN Port: Connect to an Ethernet supporting device or to your local
network, as appropriate, to extend the network to both ends of the
HDBaseT connection and to control the unit.
6.2 Rear Panel
DC 12V
+
−
CAT5e/6/7 OUT
31 2
1DC 12V Port: Plug the 12V DC power adapter into this terminal block
and connect it to an AC wall outlet for power. (Optional)
Note: This connection is not required if the unit is receiving power via 48V
PoH from the Receiver.
2SERVICE Port: This port is reserved for rmware update use only.
3CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver with
a single Cat.5e/6/7 cable for transmission of all data signals. 48V PoH
will also be supplied when connected to a compatible PSE Receiver.
Note: The 48V PoH function is designed to receive power from compatible
Receiver units only. Other brands of Receiver may not be compatible.
Tabla de contenidos
Otros manuales de Transmisor de CYP
CYP
CYP PUV-2100TX-AVLC Manual de usuario
CYP
CYP PU-501 Manual de usuario
CYP
CYP CH-2527TXPL Manual de usuario
CYP
CYP PUV-1510RXWP Manual de usuario
CYP
CYP CH-2605TXV Manual de usuario
CYP
CYP CH-1605TXV Manual de usuario
CYP
CYP AVIP-P5104T-B1C Manual de usuario
CYP
CYP CH-352TX Manual de usuario
CYP
CYP CSI-8H8CVTX Manual de usuario
CYP
CYP CH-1527TXPLV Manual de usuario
CYP
CYP CH-2606TX Manual de usuario
CYP
CYP CHDBT-1H2CE Manual de usuario
CYP
CYP PU-1103 Manual de usuario
CYP
CYP VEX-T1201T Manual de usuario
CYP
CYP CH-527TXVBD Manual de usuario
CYP
CYP CSI-8H8CV2IR Manual de usuario
CYP
CYP CH-306TXA & RXA Manual de usuario
CYP
CYP CH-1529TXV Manual de usuario
CYP
CYP CH-2527TX Manual de usuario
CYP
CYP EL-2600V Manual de usuario
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
