CYP PU-507TX-CVGA Manual de instalación

PU-507TX-CVGA

CV / PC over HDBaseT™ Transmitter with integrated video

scaling (5-Play™ inc. PoE & single LAN, up to 100m)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 06/11/2013 First release

v1.01 21/11/2013 Added RS-232 commands

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................7

6. Operation Controls and Functions.......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 IR Cable Pin Assignment.......................10

6.4 RS-232 Pin Denitions ...........................10

6.5 Remote Control........................................11

6.6 RS-232 Commands .................................12

6.7 OSD Menu..................................................14

6.8 Input Resolution Support.....................16

7. Connection Diagram .......................... 17

8. Specications...................................... 18

8.1 Technical Specications ........................18

8.2 CAT5e/6/7 Cable Specication ...........19

9. Acronyms............................................. 19

1. INTRODUCTION

The PU-507TX-CVGA is a HDBaseT™ Transmitter which allows transmission

of PC or Composite Video sources and audio over a single CAT5e/6/7 cable

to the receiver at a distance of up to 100m. The integrated scaler enables

the installer to maximise the output resolution and ensure compatibility

to the connected display. With full 5-Play convergence for uncompressed

high denition video and stereo audio, this transmitter also allows the

transfer of LAN serving, Bi-directional Power over Ethernet (PoE), RS-232,

and 2-way IR all simultaneously over a single CAT5e/6/7 cable. Control of

the transmitter is via IR remote or via selection buttons on the front panel

of the device allowing the user to navigate the On-Screen Display (OSD)

for selecting the required settings or system information.

2. APPLICATIONS

Analog to Digital video signal conversion

Up scale standard denition video to High-Denition TVs/displays

Extend the operating distance of a CV/PC video signal

Lecture room/Showroom/Meeting room/Classroom display and control

3. PACKAGE CONTENTS

CV/PC to CAT5e/6/7 with LAN/IR/RS-232/Bidirectional PoE Transmitter

1×IR Extender

1×IR Blaster

24V/2.7A DC Power Adaptor

Remote control (CR-128)

Operation Manual

4. SYSTEM REQUIREMENTS

CV/PC source equipment such as a DVD/Video player or PC/Laptop and

output to HDBaseT compatible Receiver.

5. FEATURES

Supports PC/CV scaling to a full range of HDTV or PC resolutions up to

1080p and WUXGA (Reduced Blanking)

Supports uncompressed video/audio up to 10.2Gbps

Supports Ethernet transmission rates up to 100 Mbps

Supports uncompressed data transfer over single CAT cable (100m -

CAT6/7; 80m - CAT5e)

5-Play™ convergence: HDMI, LAN, POE & Control (IR & RS232)

Supports bi-directional PoE when connected to a compatible Bi-

directional PoE Receiver

Supports OSD (On-screen Display) selection and system information display

Supports NTSC and PAL formats for Composite Video input

Control via IR remote and on-panel selection buttons

Note:

1. This system was tested with CAT6/23AWG cables, results may vary with

cables of dierent specications.

2. The PoE function is designed for powering compatible Receiver units only—

non-PoE Receivers will need their own power supply. Receivers from other

brands may not be compatible.

3. DO NOT connect the LAN connection to the CAT5e/6/7 port. Doing so may

cause a power shutdown and may damage the device

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

PC CV XGA

AUDIO

SERVICE

MEN

NTER

720P

INPUT CV/PC

INPUT

2 3 4 5 6 8 91

1SERVICE: Reserved for manufacturer use only.

2IR Receiver window: Receives only the IR signal from the supplied

remote control for this device only.

3PC: Connect to a PC/Laptop source device with a D-Sub 15pin cable.

4CV: Connect to a composite video source such as a DVD/Video player.

5AUDIO: Connect to an analog stereo (L/R) audio source with a 3.5mm

mini-jack cable.

6MENU: Press this button to enter the On-Screen Display (OSD) menu.

7INPUT (–) Button & CV/PC LED: Press the INPUT (−) button to toggle

between CV or PC inputs. When in CV mode the LED will be lit, o

when in PC mode.

8−/+: Use these buttons to navigate down and up in the on-screen menu.

9ENTER: Press this button to conrm the selection.

Note:

Pressing '−' (MINUS) and ENTER simultaneously will immediately switch

the output resolution of the device to 720p60.

Pressing '+' (PLUS) and ENTER simultaneously will immediately switch the

output resolution of the device to XGA (1024×768).

6.2 Rear Panel

Blaster

Extender

CAT5e/6 OUT

MODE

LINK

LANRS232 IN

DC 24V

POWER

21 3 4 5 6 7

1Power LED: This LED will illuminate when the device is connected to

an active power supply.

2DC 24V: Connect the 24V DC power supply to the unit and plug the

adaptor into an AC outlet. Only one unit requires powering if both the

Transmitter and Receiver are both PoE compatible.

3RS-232 IN: Connect to a PC or RS-232 control system with a D-Sub 9

pin male cable for the transmission of RS-232 commands.

4LAN: Connect to an active network for LAN serving. When any compatible

LAN equipped receivers are connected, this allows the network access

(including internet access if available) to be shared between any

connected LAN equipped receivers. Connect any Ethernet equipped

device e.g. a Smart TV or games console to the LAN port of a receiver for

that device to share the network/internet access.

Warning: DO NOT connect the LAN connection to the CAT5e/6/7 port.

Doing so may cause a power shutdown and may damage the device.

5IR Blaster: Connect the supplied IR Blaster cable for IR signal

transmission. Place the IR Blaster in direct line-of-sight of the

equipment to be controlled.

6IR Extender: Connect the supplied IR Receiver cables for IR signal

reception. Ensure that remote being used is within the direct line-of-

sight of the IR Extender.

7CAT5e/6/7 Out: Connect to the Receiver unit with a single CAT5e/6/7

cable for transmission of all data signals.

MODE LED: This LED will illuminate when the power is connected.

Link LED: This LED will illuminate when connected to a Receiver unit

that is connected with a TV/monitor that is displaying the signal.

6.3 IR Cable Pin Assignment

1Power

IR Blaster Signal

IR Signal

Power

Ground

IR Extender

IR Blaster

6.4 RS-232 Pin Denitions

Pin Dene TX / RX

1N/C

2TxD/RxD

3RxD/TxD

4NC

5GND

6NC

7NC

8NC

9NC

Baud Rate: 9600bps

Data bit: 8 bits

Parity: None

Flow Control: None

Stop Bit: 1

Tabla de contenidos

Otros manuales de Transmisor de CYP

CYP

CYP CH-1529TXV Manual de usuario

CYP

CYP PUV-3090TX-UEA Manual de usuario

CYP

CYP CHDBT-1H2CE Manual de usuario

CYP

CYP CH-1527TXV Manual de usuario

CYP

CYP PU-507TX-1H Manual de usuario

CYP

CYP Dante AU-DTI4-TX Manual de usuario

CYP

CYP PUV-1730PLTX-AVLC Manual de usuario

CYP

CYP CH-A320TX Manual de usuario

CYP

CYP PU-1H7HBTL Manual de usuario

CYP

CYP CH-1527TXPLV Manual de usuario

CYP

CYP PRO-SDIOF-KIT Manual de usuario

CYP

CYP CA-HDMIAT Manual de usuario

CYP

CYP CH-507TXWPUS Manual de usuario

CYP

CYP PUV-1605S-TXWP Manual de usuario

CYP

CYP VEX-T1201T Manual de usuario

CYP

CYP CH-2527TXPL Manual de usuario

CYP

CYP CA-HDMIAT Manual de usuario

CYP

CYP CH-501RX Manual de usuario

CYP

CYP CSI-8H8CV2IR Manual de usuario

CYP

CYP PU-8H8CTXIR Manual de usuario

CYP

CYP CH-527TXVBD Manual de usuario

CYP

CYP CH-2605TXV Manual de usuario

CYP

CYP CH-103TX Manual de usuario

CYP

CYP CPLUS-12FTX Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario