CYP PRO-H2-3GSDI Manual de usuario

PRO-H2-3GSDI

HDMI to 3G-SDI Dual Output Converter

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v2.00 26/06/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................7

6. Operation Controls and Functions .......8

6.1 Front Panel.................................................. 8

6.2 Rear Panel..................................................... 9

6.3 EDID Update Procedure ........................10

6.4 LED Signal Chart ......................................12

7. Connection Diagram .......................... 15

8. Specifications...................................... 16

9. Acronyms............................................. 17

1. INTRODUCTION

The HDMI to SDI Converter allows HDMI signals to be shown on two SDI

displays while ensuring high bit rates of 2.970 Gbit/s to give you high

resolution signal without any loss. For professionals this means that it is

now easier to convert your high def HDMI signal with audio to SDI for

long distance transmission and display your work on two SDI displays.

Also, a 2 CH L/R audio input allows DVI signal with 2CH audio to be

converted to SDI in order to be shown on SDI displays. Furthermore, the

device has a built-in default EDID and a recordable EDID that guarantee

image display compatibility with source equipment.

2. APPLICATIONS

HDMI signal display on SDI display(s)

Extending a HDMI signal over 100m to two SDI displays

DVI signal with audio display on SDI display(s) (DVI to HDMI adaptor

cable required)

Cascade HDMI signal over SDI cables

3. PACKAGE CONTENTS

HDMI to 3G SDI Dual-Output converter

5V/2.6 A Power Adaptor

Operation Manual

4. SYSTEM REQUIREMENTS

Input HDMI/DVI (with audio signal) source equipment with

connection cable(s).

Output SDI display(s) or SDI to HDMI converter(s) with connection

cable(s).

5. FEATURES

Shows HDMI source on two SDI displays simultaneously

SDI interface operates at bitrates of 2.970 Gbit/s, 2.970/1.001 Gbit/s,

1.485 Gbit/s, 1.485/1.001 Gbit/s and 270 Mb/s

Converts HDMI signal to SDI:

1. 480i/576i to SD-SDI (SMPTE 259M-C, at bitrates of 270 Mbit/s)

2. 720p/1080i to HD-SDI (SMPTE 292M, at bitrates of 1.485 Gbit/s or

1.485/1.001 Gbit/s)

3. 1080p to 3G-SDI (SMPTE 424M/425M-AB, at bitrates of

2.970 Gbit/s and 2.970/1.001 Gbit/s)

Supports HDMI input timings: [email protected], 576i, 720p@50/59.94/60,

1080i@50/59.94/60, [email protected]/24/25/29.97/30/50/59.94/60

Choose between a selectable EDID and recordable EDID

Integrated audio embedded up to 8 CH PCM 48 kHz for HDMI or 2 CH

(external L/R) for DVI audio

Supports SDI output distance up to 100 meters (3G-SDI), 200 meters

(HD-SDI), or 300 meters (SD-SDI)

Note:

1. Tested with Belden 1694A Cable. Operating distances may vary if used

with cables of different specifications.

2. This product does not process HDCP encrypted input signals. There will

be no video output when the input signal contains content that is HDCP

encrypted.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

EDID

Update 3G

3G SDI

Out 1Out 2

HDMI/DVI

Video Lock

HD EDID

3G EDID

2 1 3 6

5 74 8

1EDID Switch: Use this switch to select between the built-in or to

update the EDID settings. Default EDID settings as shown below:

3G EDIDNative Mode 1080p@60

HD EDIDNative Mode 1080i@60

EDID updateNative Mode 720p@60

2EDID Update button: Only use this function when the image has

not displayed correctly after trying to switch the EDID Update/HD/3G

mode with the EDID switch (refer to Section 6.3 for update procedure).

3HDMI/DVI LED: The LED will illuminate green only when the input

source is HDMI. It will not illuminate when the input is DVI.

4Video Lock LED: The LED will illuminate yellow when the HDMI input

is receiving and locking a signal.

5EDID Update LED: The LED will illuminate red when the EDID settings

are being updated (refer to Section 6.4 LED Signal Chart).

6SD LED: The LED will illuminate green when the HDMI input signal is

480i/576i.

73G LED: The LED will illuminate red when the HDMI input signal is

1080p@50/60.

8HD LED: The LED will illuminate yellow when the input HDMI input

signal is 1080p@24/25/30, 1080i@50/60 or 720p@50/60.

93G SDI Out 1 & 2: Connect to up to 2 SDI TVs or monitors for mirrored

display or to a SDI to HDMI converter to cascade the SDI signal to

multiple displays or devices

6.2 Rear Panel

HDMI In Audio In

Audio SW

Power DC 5V

HDMI R/L

1 3 4 52

1HDMI In: Connect to the HDMI source equipment such as DVD or

Blu-ray player or it can also be connected to a DVI source (with DVI to

HDMI Adaptor cable).

2Audio Switch: Use this switch to select between HDMI audio or an

external analogue stereo source (R/L RCA jack).

3Audio In R/L:Connect to an audio source such as a DVD or Blu-ray

player with R/L RCA jack output or an alternate audio source such as a

PC/Notebook. Can be used to provide audio for a DVI input.

4Power LED: The LED will illuminate when the device is connected to a

power supply.

5DC 5V: Plug the 5V DC power supply into the Converter and connect

the adaptor to an AC outlet.

6.3 EDID Update Procedure

Please follow this procedure if there is no image displayed or it is

displayed incorrectly.

A. Please ensure that the display output settings of the source input

device (such as a Blu-ray player or HD Camcorder) is set to “Automatic”.

If the source image is displayed correctly no further action is necessary

but if not to step B.

DVD Player Converter SDI Monitor

HDMI SDI

B. Connect the HDMI source directly (without connecting to the

Converter) to a HDMI monitor or TV to see if the image is displayed

correctly. Ensure that the source's output timing supports SDI or the

Converter's timing. If it is supported, go to step C. If not, please try

a different monitor or TV and adjust the timing until the image is

displayed correctly.

DVD Player HDMI

TV/Monitor

Adjust to correct SDI Timing

(HDMI Cable)

C. Connect the HDMI monitor or TV to the input port of the Converter

and then set the EDID switch to the 'EDID update' position. Press and

hold the EDID update button consistantly until the Video Lock LED

illuminates. This will allow the Converter to replace the default EDID

settings with the monitor/TV’s EDID settings.

HDMI

TV/Monitor

1. Move the EDID switch to EDID update position

2. Press and hold the EDID update button

(HDMI Cable)

Converter

Otros manuales para PRO-H2-3GSDI

Tabla de contenidos

Otros manuales de Convertidor de medios de CYP

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario

Expert

Expert EX-9543 Manual de usuario