CYP CPLUS-VHHE Manual de usuario
CPLUS-VHHE
4K UHD+ EDID Emulator
with HDCP Converter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2017 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
VR0 07/09/16 Preliminary release
VS1 17/03/17 Added section 8.2 and
updated diagrams
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................1
5. Features............................................................2
6. Operation Controls and Functions.................2
6.1 Front and Rear Panels .............................. 2
6.2 Top Panel ................................................... 3
6.3 Side Panel .................................................. 5
6.4 EDID Management ................................... 6
6.4.1 EDID Controller ................................. 6
6.4.2 EDID Analyzer ................................... 7
6.4.3 EDID Creator..................................... 7
6.4.4 System ............................................... 9
7. Connection Diagram ....................................10
8. Specications ................................................11
8.1 Technical Specications ........................ 11
8.2 Video Specications............................... 12
9. Acronyms .......................................................14
1
1. INTRODUCTION
This 4K UHD EDID Emulator with HDCP Converter is a handy device
to include in your HDMI signal tool box. With support for full HDMI 2.0
bandwidth (up to 6Gbits per channel), HDCP analysis and conversion,
EDID management, and YUV 4:2:0 color subsampling, this unit can
help solve or diagnose many common HDMI issues. This unit provides a
quick and easy way to view the status of an HDMI signal. Additionally,
this unit provides a robust EDID management system, allowing the user
to download or upload existing EDIDs, or to create a basic custom
EDID from scratch for use within the unit. The unit’s included hot keys
and simple LED design allows the user to quickly switch between
different congurations while viewing the HDMI status information.
2. APPLICATIONS
• Source and display signal status information
• EDID management
• HDCP verication
• 4K@50/60Hz (4:4:4) color subsampling to 4K@50/60Hz (YUV 4:2:0) for
display compatibility
3. PACKAGE CONTENTS
• 1×EDID Emulator with HDCP Converter
• 1×5V/2.6A DC Power Adaptor
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as media players, video game
consoles or set-top boxes.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
2
5. FEATURES
• HDMI input and output with 18Gbps (600MHz) 4K UHD support
• DVI 1.0 compliant with the use of an HDMI-DVI adapter
• HDCP 1.4 and 2.2 compliant
• Supports HD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit) &
4096×2160@60Hz (4:4:4, 8-bit)
• Supports pass-through of LPCM 2.0/5.1/7.1, Bitstream, and HD
Bitstream audio formats
• Video source signal and display EDID analysis
• HDCP 2.2 to 1.4 conversion
• EDID selectable between internal, external and user’s custom EDID
• PC-based EDID management tool support
• LED display with easy viewing of the current signal status
• Supports 18Gbps bandwidth bypass and 18Gbps color subsampling
to 10.2Gbps (4K@50/60Hz, 4:4:4 to 4K@50/60Hz, YUV 4:2:0)
• Supports rmware updates via USB
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front and Rear Panels
HDMI IN
DC
5V
SERVICE
HDMI OUT
1 2 3 4
1HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box. DVI sources are supported
with the use of an HDMI to DVI adapter.
Note: 4K UHD sources with HDR or equivalently high-bandwidth
signals require an appropriate compatible display and HDMI
cables in order to achieve the best image quality. The use of
3
“Premium High Speed HDMI” cables is highly recommended.
2DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
3SERVICE: This slot is used for PC software control, EDID upload and
rmware updates (see section 6.4).
4HDMI OUT: Connect to an HDMI TV, monitor or amplier for digital
video and audio output.
6.2 Top Panel
SYNC
3G
6G
1.4
2.2
HDCP
INT
EXT
USER
EDID
PWR
YUV
420
USB
LINK
1
2
3
4
5
6
1PWR LED: The LED will illuminate to indicate the unit is on and
receiving power.
2SYNC LEDs: These LEDs will illuminate according to the HDMI input
and output signal’s current bandwidth. When the input signal is 6G,
and the “YUV420” feature is active, both LEDs will illuminate. When
the LED is blinking it indicates a problem with the signal.
3HDCP LEDs: These LEDs will illuminate according to the HDCP
encryption status of the HDMI source signal and the reported
4
capability of the connected display. When both input and output
support HDCP 2.2, the “2.2” LED will illuminate. When the input
signal is HDCP 2.2 encrypted but the display only supports HDCP
1.4, both LEDs will illuminate. If an LED is blinking it indicates that the
HDCP link has failed. When the LEDs are not illuminated it indicates
that HDCP is not active. Please reference the chart below for more
detail.
Input's HDCP Output's HDCP Unit's HDCP LEDs
1.4 2.2 Non 1.4 2.2 Non 1.4 LED 2.2 LED
Illuminated
Not
illuminated
Illuminated
Blinking
Illuminated Illuminated
Not
illuminated
Illuminated
Blinking
Not
illuminated
Not
illuminated
4EDID LEDs: The LED indicating the currently selected EDID source
will be illuminated.
5YUV420 LED: This LED will illuminate if the YUV420 (4K (4:4:4) to 4K
(YUV 4:2:0)) function is active.
6USB LINK LED: This LED will illuminate when the unit has an active
connection with the PC Control Software via the Micro-USB port.
5
6.3 Side Panel
YUV420 EDID
ACTIVE SRC
1 2 3 4
1YUV420: Press this button to enable or disable the YUV 4:2:0 color
subsampling function. When enabled, a 4K (4:4:4) source will be
converted to a 4K (YUV 4:2:0) output signal with the same refresh
rate.
2EDID: Press this button to select the EDID to send to the HDMI
source. The available choices are: Internal, External, and User. The
internal EDID is set to 1080p60 with LPCM 2.0 audio. The External
EDID setting passes the EDID directly from the connected display
to the source. The User EDID is a customized EDID that has been
uploaded to the unit from the PC software. By default, the User
EDID is set to 4K@60 (YUV 4:2:0) with LPCM 2.0 audio.
3ACTIVE SRC: Press this button to force the connected HDMI display
to switch to the input the unit is connected to.
Note: The HDMI display must support CEC in order to perform this
function.
4PINHOLE: This recessed button is reserved for factory use only.
Otros manuales para CPLUS-VHHE
1
Tabla de contenidos
Otros manuales de Convertidor de medios de CYP
CYP
CYP CLUX-2HPIP Manual de usuario
CYP
CYP CM-397M Manual de usuario
CYP
CYP CSO-T2 Manual de usuario
CYP
CYP CUSB-601H Manual de usuario
CYP
CYP EL-7400V Manual de usuario
CYP
CYP CSC-220 Manual de instalación
CYP
CYP AU-11DD Manual de usuario
CYP
CYP DCT-24 Manual de usuario
CYP
CYP CP-259UHD Manual de usuario
CYP
CYP CM-388M Manual de usuario
CYP
CYP CSC-V101P Manual de usuario
CYP
CYP SY-720SC Manual de usuario
CYP
CYP SY-P293 Manual de usuario
CYP
CYP DCT-4 Manual de usuario
CYP
CYP DCT-1 Manual de usuario
CYP
CYP CDM-160 Manual de usuario
CYP
CYP CDPS-84HB Manual de usuario
CYP
CYP CP-259H Manual de usuario
CYP
CYP AU-D4T Manual de usuario
CYP
CYP CDB-5 Manual de usuario
